Has anyone else encountered this problem? Sorry, my contact info is: Steve O'Brien obr...@velocent.com Sr. Engineer Velocent Systems
-----Original Message----- From: Steve O'Brien [mailto:obr...@velocent.com] Sent: Thursday, January 26, 2012 1:00 PM To: 'e1000-devel@lists.sourceforge.net' Subject: VFS vs MTU Oh, I hope this isn't a dumb question, but I can't set the MTU to 4096 using SR-IOV. I'm using the X520-SR2 dual 82599 NIC with RedHat 6.0. I use 'modprobe ixgbe max_vfs=4,4`, then try to increase the MTU using 'ifconfig eth2 mtu 4096', gives me the response `SIOCSIFMTU: Invalid argument`. The modprobe appears successful, dmesg is: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.7.17-NAPI Copyright (c) 1999-2011 Intel Corporation. ixgbe 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ixgbe 0000:13:00.0: setting latency timer to 64 ixgbe: I/O Virtualization (IOV) set to 4 ixgbe: 0000:13:00.0: ixgbe_check_options: FCoE Offload feature disabled ixgbe 0000:13:00.0: irq 28 for MSI/MSI-X ixgbe 0000:13:00.0: irq 29 for MSI/MSI-X ixgbe 0000:13:00.0: (PCI Express:2.5GT/s:Width x8) 00:1b:21:8e:ae:e4 ixgbe 0000:13:00.0: eth2: MAC: 2, PHY: 15, SFP+: 5, PBA No: E68785-003 ixgbe 0000:13:00.0: eth2: Enabled Features: RxQ: 1 TxQ: 1 LRO ixgbe 0000:13:00.0: eth2: IOV: VF 0 is enabled mac 36:25:DD:F1:C6:DC ixgbe 0000:13:00.0: eth2: IOV: VF 1 is enabled mac 3A:98:30:1A:89:9D ixgbe 0000:13:00.0: eth2: IOV: VF 2 is enabled mac 42:7F:C3:60:78:60 ixgbe 0000:13:00.0: eth2: IOV: VF 3 is enabled mac 46:70:37:00:FC:8C ixgbe 0000:13:00.0: eth2: Intel(R) 10 Gigabit Network Connection ixgbe 0000:13:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ixgbe 0000:13:00.1: setting latency timer to 64 ixgbe: I/O Virtualization (IOV) set to 4 ixgbe: 0000:13:00.1: ixgbe_check_options: FCoE Offload feature disabled ADDRCONF(NETDEV_UP): eth2: link is not ready ixgbe 0000:13:00.0: eth2: detected SFP+: 5 ixgbe 0000:13:00.1: irq 30 for MSI/MSI-X ixgbe 0000:13:00.1: irq 31 for MSI/MSI-X ixgbe 0000:13:00.1: (PCI Express:2.5GT/s:Width x8) 00:1b:21:8e:ae:e5 ixgbe 0000:13:00.1: eth3: MAC: 2, PHY: 15, SFP+: 6, PBA No: E68785-003 ixgbe 0000:13:00.1: eth3: Enabled Features: RxQ: 1 TxQ: 1 LRO ixgbe 0000:13:00.1: eth3: IOV: VF 0 is enabled mac 8A:75:79:3D:91:45 ixgbe 0000:13:00.1: eth3: IOV: VF 1 is enabled mac EA:DB:6E:21:CE:D2 ixgbe 0000:13:00.1: eth3: IOV: VF 2 is enabled mac EE:22:8A:91:7A:AC ixgbe 0000:13:00.1: eth3: IOV: VF 3 is enabled mac A2:92:0B:65:4A:24 ixgbe 0000:13:00.1: eth3: Intel(R) 10 Gigabit Network Connection ADDRCONF(NETDEV_UP): eth3: link is not ready ixgbe 0000:13:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready ixgbe 0000:13:00.1: eth3: detected SFP+: 6 ixgbe 0000:13:00.1: eth3: NIC Link is Up 10 Gbps, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready ------------------------------------------------------------------------------ Try before you buy = See our experts in action! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-dev2 _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired