>-----Original Message----- >From: Holger Eitzenberger [mailto:[email protected]] >Sent: Thursday, February 16, 2012 11:42 PM >To: Dave, Tushar N >Cc: [email protected] >Subject: Re: [E1000-devel] 82571EB: Unit Hang kernel 2.6.32.y + driver >v1.9.5 > > >> >It occurs in bursts, with phases in which this issue does not show up >> >in between. However, in this case it showed up right after booting >> >into the kernel with the updated driver. >> >> So are you saying that tx hang did occur right after boot? And then you >get link flap messages? >> When you have this issue, does all of the interfaces are connected? >> I need more info, please send lspci -vvv and full dmesg log after issue >occurs. > >Right after boot into the kernel with the new driver I see eth2 going UP >and DOWN for some time, see the attached dmesg output from my previous >post. There now is no Unit Hang in particular. The dmesg you sent (in previous post) is not full dmesg log. I need to look at full dmesg log after issue occurs.
-Tushar ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
