I m using the e1000e driver for Intel 82574L chipset .
When the cable is plugged in and Auto Negotiated , It reports as Link
Detected as NO. I need to do a ifconfig up eth3 to get the Link
Detected as YES .
Is this the expected behavior of the new driver - e1000e: Intel(R)
PRO/1000 Network Driver - 2.2.14-NAPI .
Is there a work around on the driver for this ?
ethtool eth3
Settings for eth3:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: no
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest.
Compete for recognition, cash, and the chance to get your game
on Steam. $5K grand prize plus 10 genre and skill prizes.
Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
