On 2015-10-08 16:23, Rose, Gregory V wrote: >> -----Original Message----- >> From: Christian Ruppert [mailto:id...@qasl.de] >> Sent: Wednesday, October 07, 2015 10:54 AM >> To: Rose, Gregory V >> Cc: Fujinaka, Todd; e1000-de...@lists.sf.net >> Subject: RE: [E1000-devel] X710 / i40e interface resets >> >> On 2015-10-07 18:49, Rose, Gregory V wrote: >> >> -----Original Message----- >> >> From: Christian Ruppert [mailto:id...@qasl.de] >> >> Sent: Wednesday, October 07, 2015 8:00 AM >> >> To: Rose, Gregory V >> >> Cc: Fujinaka, Todd; e1000-de...@lists.sf.net >> >> Subject: RE: [E1000-devel] X710 / i40e interface resets >> >> >> > > > [snip] > >> > Maybe, but first let me ask you if you're using the VEPA mode work >> > around for bonding? >> > >> >> No, just the basic bonding in 802.3ad mode. We don't use VEPA at all. > > Can you send me the output of the command "bridge link show"?
3: eth0 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 master bond0 hwmode VEPA 5: eth1 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 master bond0 hwmode VEPA hm, now that's interesting... > > Thanks, > > - Greg -- Regards, Christian Ruppert ------------------------------------------------------------------------------ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired