Hello, As requested, output is below. Thanks.
# ethtool p1p1 Settings for p1p1: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: 1000baseT/Full 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: g Wake-on: d Current message level: 0x0000000f (15) drv probe link timer Link detected: no # ethtool p1p2 Settings for p1p2: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: 1000baseT/Full 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x0000000f (15) drv probe link timer Link detected: no # ethtool -i p1p1 driver: i40e version: 1.2.9-k firmware-version: f4.33 a1.2 n04.41 e80001866 bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes # ethtool -i p1p2 driver: i40e version: 1.2.9-k firmware-version: f4.33 a1.2 n04.41 e80001866 bus-info: 0000:04:00.1 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes dmesg: bonding: bond1 is being created... bond1: Setting MII monitoring interval to 100 bond1: Setting MII monitoring interval to 100 bond1: Setting MII monitoring interval to 100 bond1: Adding slave p1p1 i40e 0000:04:00.0: p1p1: already using mac address 3c:fd:fe:04:9d:80 i40e 0000:04:00.0: i40e_ptp_init: added PHC on p1p1 i40e 0000:04:00.0: AQ command Config VSI BW allocation per TC failed = 14 i40e 0000:04:00.0: Failed configuring TC map 255 for VSI 516 i40e 0000:04:00.0: failed to configure TCs for main VSI tc_map 0x000000ff, err -22, aq_err 14 i40e 0000:04:00.0: enabling bridge mode: VEPA i40e 0000:04:00.0: p1p1: already using mac address 3c:fd:fe:04:9d:80 bond1: option slaves: invalid value (+p1p1) bond1: Setting MII monitoring interval to 100 bond1: Adding slave p1p2 i40e 0000:04:00.1: p1p2: already using mac address 3c:fd:fe:04:9d:82 i40e 0000:04:00.1: i40e_ptp_init: added PHC on p1p2 i40e 0000:04:00.1: AQ command Config VSI BW allocation per TC failed = 14 i40e 0000:04:00.1: Failed configuring TC map 255 for VSI 517 i40e 0000:04:00.1: failed to configure TCs for main VSI tc_map 0x000000ff, err -22, aq_err 14 i40e 0000:04:00.1: enabling bridge mode: VEPA i40e 0000:04:00.1: p1p2: already using mac address 3c:fd:fe:04:9d:82 bond1: option slaves: invalid value (+p1p2) ------------[ cut here ]------------ WARNING: at drivers/net/i40e/i40e_main.c:1539 i40e_vsi_setup_queue_map+0x30c/0x330 [i40e]() (Not tainted) Hardware name: PowerEdge R430 Modules linked in: bonding ipv6 joydev sg microcode ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas tg3 power_meter acpi_ipmi ipmi_si ipmi_msghandler i40e configfs ptp pps_core sb_edac edac_core lpc_ich mfd_ core shpchp ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif xhci_hcd ahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 131, comm: events/0 Not tainted 2.6.32-573.8.1.el6.x86_64 #1 Call Trace: [<ffffffff81077461>] ? warn_slowpath_common+0x91/0xe0 [<ffffffff810774ca>] ? warn_slowpath_null+0x1a/0x20 [<ffffffffa01b1ecc>] ? i40e_vsi_setup_queue_map+0x30c/0x330 [i40e] [<ffffffffa01b3894>] ? i40e_vsi_config_tc+0x1e4/0x320 [i40e] [<ffffffffa01bb8b0>] ? i40e_handle_lldp_event+0x2b0/0x650 [i40e] [<ffffffffa01bc9d8>] ? i40e_service_task+0xcf8/0x1180 [i40e] [<ffffffff8109a780>] ? worker_thread+0x170/0x2a0 [<ffffffff810a1460>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8109a610>] ? worker_thread+0x0/0x2a0 [<ffffffff810a0fce>] ? kthread+0x9e/0xc0 [<ffffffff8100c28a>] ? child_rip+0xa/0x20 [<ffffffff810a0f30>] ? kthread+0x0/0xc0 [<ffffffff8100c280>] ? child_rip+0x0/0x20 ---[ end trace 2c401f7c7f160a8e ]--- ------------[ cut here ]------------ WARNING: at drivers/net/i40e/i40e_main.c:1539 i40e_vsi_setup_queue_map+0x30c/0x330 [i40e]() (Tainted: G W -- ------------ ) Hardware name: PowerEdge R430 Modules linked in: bonding ipv6 joydev sg microcode ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas tg3 power_meter acpi_ipmi ipmi_si ipmi_msghandler i40e configfs ptp pps_core sb_edac edac_core lpc_ich mfd_core shpchp ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif xhci_hcd ahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 131, comm: events/0 Tainted: G W -- ------------ 2.6.32-573.8.1.el6.x86_64 #1 Call Trace: [<ffffffff81077461>] ? warn_slowpath_common+0x91/0xe0 [<ffffffff810774ca>] ? warn_slowpath_null+0x1a/0x20 [<ffffffffa01b1ecc>] ? i40e_vsi_setup_queue_map+0x30c/0x330 [i40e] [<ffffffffa01b3894>] ? i40e_vsi_config_tc+0x1e4/0x320 [i40e] [<ffffffffa01bb8b0>] ? i40e_handle_lldp_event+0x2b0/0x650 [i40e] [<ffffffffa01bc9d8>] ? i40e_service_task+0xcf8/0x1180 [i40e] [<ffffffffa01bbce0>] ? i40e_service_task+0x0/0x1180 [i40e] [<ffffffff8109a780>] ? worker_thread+0x170/0x2a0 [<ffffffff810a1460>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8109a610>] ? worker_thread+0x0/0x2a0 [<ffffffff810a0fce>] ? kthread+0x9e/0xc0 [<ffffffff8100c28a>] ? child_rip+0xa/0x20 [<ffffffff810a0f30>] ? kthread+0x0/0xc0 [<ffffffff8100c280>] ? child_rip+0x0/0x20 ---[ end trace 2c401f7c7f160a8f ]--- i40e 0000:04:00.0: veb bw config failed, aq_err=14 i40e 0000:04:00.0: Failed configuring TC for VEB seid=288 i40e 0000:04:00.0: AQ command Config VSI BW allocation per TC failed = 14 i40e 0000:04:00.0: Failed configuring TC map 255 for VSI 516 i40e 0000:04:00.0: Failed configuring TC for VSI seid=516 i40e 0000:04:00.1: veb bw config failed, aq_err=14 i40e 0000:04:00.1: Failed configuring TC for VEB seid=289 i40e 0000:04:00.1: AQ command Config VSI BW allocation per TC failed = 14 i40e 0000:04:00.1: Failed configuring TC map 255 for VSI 517 i40e 0000:04:00.1: Failed configuring TC for VSI seid=517 alloc irq_desc for 320 on node 0 alloc kstat_irqs on node 0 -- Andy On 01/12/2015, 18:59, "Rose, Gregory V" <gregory.v.r...@intel.com> wrote: >Please provide the output of 'ethtool -i' and 'ethtool' for each XL710/X710 >interface in the system as well as the output of 'dmesg' *after* the error has >occurred. > >Thanks, > >- Greg > >> -----Original Message----- >> From: Andy Fletcher [mailto:andy.fletc...@ukdedicated.com] >> Sent: Friday, November 27, 2015 9:16 AM >> To: e1000-devel@lists.sourceforge.net >> Subject: [E1000-devel] i40e and bonding >> >> Hello, >> >> We’re trying to get the XL710 working with the Linux bonding driver, but >> the driver simply refuses to enslave the 10G interfaces: >> >> # ifenslave bond1 p1p1 >> >> Master ‘bond1', Slave 'p1p1': Error: Enslave failed strace on this shows: >> ioctl(3, SIOCBONDENSLAVE, 0x7ffd6c35c560) = -1 EINVAL (Invalid argument) >> >> >> Furthermore, if moving from our distro (RHEL6) driver (1.2.9-k) to >> anything from the i40e stable, this causes a kernel panic on bringing up >> the bonded interface. >> >> The driver notes say that bonding is supported, so it’s not clear why this >> is failing. Can anyone confirm if this is actually supported? >> >> Kernel panic: >> <6>bond1: Enslaving p2p1 as an active interface with an up link >> <1>BUG: unable to handle kernel NULL pointer dereference at >> 000000000000001c >> <1>IP: [<ffffffffa02b4b57>] i40e_tx_map+0x77/0x4b0 [i40e] <4>PGD 0 >> <4>Oops: 0002 [#1] SMP >> <4>last sysfs file: /sys/devices/virtual/net/bond1/broadcast >> <4>CPU 18 >> <4>Modules linked in: bonding i40e(U) ipv6 microcode sg joydev >> ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas tg3 power_meter acpi_ipmi >> ipmi_si ipmi_msghandler configfs ptp pps_core sb_edac edac_core lpc_ich >> mfd_core shpchp ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif >> megaraid_sas ahci wmi dm_mirror dm_region_hash dm_log dm_mod [last >> unloaded: i40e] <4> >> >> >> >> -- >> Andy This message and any attachments may be private or confidential. If you have received this message in error then please remove it from your systems and notify us. All communications are subject to: http://www.ukdedicated.com/email/ UKDedicated Ltd - Registered in England and Wales - No. 04625539. VAT No. GB814020091. Registered Office: 3 Centro, Boundary Way, Hemel Hempstead, HP2 7SU ------------------------------------------------------------------------------ Go from Idea to Many App Stores Faster with Intel(R) XDK Give your users amazing mobile app experiences with Intel(R) XDK. Use one codebase in this all-in-one HTML5 development environment. Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs. http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140 _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
