Hi, Maybe I confronted the similar problem. But I confirm it firstly.When this problem occurs, please run "ethtool -r" command. Can this command relieve this problem?
Please let me know. Run "dmesg" command when this problem occurs. And let me know the result.
Then I can confirm this problem the same problem with mine or not. Thanks a lot. Zhu Yanjun On 04/26/2016 07:48 PM, Laszlo Fekete wrote:
Hello! I have an issue with i40e driver, maybe somebody from here already saw it. I have debian 8 with 2 intel x710 4 port 10G sfp+ card, which has by default 3.16 kernel and i40e module with 0.4 version: 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64 GNU/Linux # ethtool -i enp4s0f0 driver: i40e version: 0.4.10-k firmware-version: f4.40 a1.4 n04.53 e80001e5c bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no Network configuration is 1-1 interface from the 2 card connected in bonding (mode4, lacp on cisco nexus switch with vpc) and vlan on that bond. basicly it seems working, but I tried to update to newer i40e version, so compiled 1.5.18 in it with dkms and I faced an issue, when I start packet capture (tcpdump on vlan, bond or physical interface it doesn't matter) seems connection hang for a short time. In particular when I start a ping to that server with 100ms interval and start tcpdump there is 1 lost packet and when stop tcpdump there is around another 10-15 lost packets. Sometimes these connection issue got permanent, I mean that switch doesn't got lacp, suspend the port and also if I reboot the server with this state (nothing changed on switch or server side) that port remain down, but if I start another tcpdump few moments after it get online and seems working again, so very strange and it's not just with one server/nic. I tried to update kernel with debian backports 4.4 and 4.5, which has newer i40e by default, on 4.4 kernel: # ethtool -i enp4s0f0 driver: i40e version: 1.3.46-k firmware-version: 4.53 0x80001e5c 17.0.12 bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes (4.5 has 1.4.... version) but these has the same issue. Also tried to update i40e driver with these newer kernels to 1.5.18 but the same. I tried to update firmware since with newer kernel I could or should but nvmupdate tell me it's already the latest. I would try 1.2.48.2 i40e version with 4.4 kernel but can't compile so can't tell earlier version also face this issues, didn't tried that or older version on 3.16 kernel. Anybody got problems like this? Thanks, blackluck ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
_______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
