Not enough detail. That hang could be from just about anything. We need to know 
a lot more about your issue. Send full dmesg, lspci, EEPROM dump, etc.

If you have an FAE, file the issue with them. Otherwise, you'll have to file a 
bug on sourceforge.

Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com
(503) 712-4565

-----Original Message-----
From: hechen...@avsolutiontech.com [mailto:hechen...@avsolutiontech.com] 
Sent: Wednesday, February 22, 2017 12:01 AM
To: e1000-devel <e1000-devel@lists.sourceforge.net>
Subject: [E1000-devel] Linux i350 driver problem

Honorific Intel Engineer:
    I'm a embedded engineer based on Linux. When I use the i350T2 Network 
driver ,error occurred,as shown below.
 My Linux version is 2.6.37 , the version of i350T2 driver is 5.0.6.
    I would like to ask you how can I solve this problem? Thank you very much. 
This is my contact information:

                                                Telephone : 15201197364  
Mailbox : hechen...@avsolutiontech.com

--------------------------------------------------[ cut here 
]-----------------------------------------------------
igb 0000:01:00.0: Detected Tx Unit Hang
  Tx Queue             <0>
  TDH                  <c9>
  TDT                  <c9>
  next_to_use          <c9>
  next_to_clean        <de>
buffer_info[next_to_clean]
  time_stamp           <91811>
  next_to_watch        <ffc17df0>
  jiffies              <91b40>
  desc.status          <1568200>
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:258 dev_watchdog+0x148/0x230() NETDEV 
WATCHDOG: eth0 (igb): transmit queue 0 timed out Modules linked in: 
aur5g8ke_face_lcd avst_digit_audio ti81xxhdmi ti81xxfb vpss osa_kermod syslink
Backtrace: 
[<c004cfac>] (dump_backtrace+0x0/0x110) from [<c033900c>] (dump_stack+0x18/0x1c)
 r6:c042b298 r5:00000102 r4:c0457df0 r3:60000113 [<c0338ff4>] 
(dump_stack+0x0/0x1c) from [<c0072910>] (warn_slowpath_common+0x54/0x6c) 
[<c00728bc>] (warn_slowpath_common+0x0/0x6c) from [<c00729cc>] 
(warn_slowpath_fmt+0x38/0x40)  r8:c02c78bc r7:00000100 r6:00000000 r5:c04cb59c 
r4:cdc0c000
r3:00000009
[<c0072994>] (warn_slowpath_fmt+0x0/0x40) from [<c02c7a04>] 
(dev_watchdog+0x148/0x230)
 r3:cdc0c000 r2:c042b2b0
[<c02c78bc>] (dev_watchdog+0x0/0x230) from [<c007cc1c>] 
(run_timer_softirq+0x130/0x1c8)
 r6:00000100 r5:c0456000 r4:c04b7c40
[<c007caec>] (run_timer_softirq+0x0/0x1c8) from [<c00777b4>] 
(__do_softirq+0x84/0x114) [<c0077730>] (__do_softirq+0x0/0x114) from 
[<c0077ba4>] (irq_exit+0x48/0x98) [<c0077b5c>] (irq_exit+0x0/0x98) from 
[<c003f07c>] (asm_do_IRQ+0x7c/0x9c) [<c003f000>] (asm_do_IRQ+0x0/0x9c) from 
[<c033aff4>] (__irq_svc+0x34/0xa0) Exception stack(0xc0457f18 to 0xc0457f60)
7f00:                                                       c0496610 00000002
7f20: cbaa8000 5efe1920 cbaa801c c0459040 00000015 c982f8c0 ccd24300 413fc082
7f40: ccd24300 c0457f6c c0457f70 c0457f60 c033b460 c033d01c 60000013 ffffffff
 r5:fa200000 r4:ffffffff
[<c033d010>] (atomic_notifier_call_chain+0x0/0x28) from [<c033b460>] 
(__switch_to+0x2c/0x4c) [<c0339564>] (schedule+0x0/0x304) from [<c004a69c>] 
(cpu_idle+0x80/0x90) [<c004a61c>] (cpu_idle+0x0/0x90) from [<c032d8dc>] 
(rest_init+0x60/0x78)
 r6:c06d0900 r5:c002dd50 r4:c04babbc r3:00000000 [<c032d87c>] 
(rest_init+0x0/0x78) from [<c0008c08>] (start_kernel+0x264/0x2b8) [<c00089a4>] 
(start_kernel+0x0/0x2b8) from [<80008048>] (0x80008048) 
-------------------------------------[ end trace bb79dcc8c86613b8 
]--------------------------------------------------



hechen...@avsolutiontech.com

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel&#174; Ethernet, visit 
http://communities.intel.com/community/wired

Reply via email to