I'm having some issues with the documentation. I've sent you an email directly suggesting that you file an IPS with your FAE for the quickest answer.
Otherwise I'll try to get the documentation fixed and the next release of the documentation might not be as fast. Todd Fujinaka Software Application Engineer Datacenter Engineering Group Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Codrut Grosu [mailto:cogr...@ixiacom.com] Sent: Thursday, July 13, 2017 7:58 AM To: e1000-devel@lists.sourceforge.net Subject: [E1000-devel] i40e driver / XL710 receive all bad packets Hi, I would like to modify the i40e driver to make xl710 receive bad packets as well (for example, ignore crc errors). From the datasheet I see that I should set the SBP bit in the PRT_SBPVSI register. But, I don't know how to do this. I don't even know what is the address of this register. I would be grateful for any help. Best wishes, Codrut ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired