On Wednesday 27 June 2012 at 00:17, Edward Robbins wrote: > Sorry for 3rd email... > > Using a 9V supply the emailer appears to start - email and voice lights > flash, then after some time the power light comes on when I press power, > and camera light comes on when I then press video, but the LCD does not > come on. So I suspect that amstrad were being cheap in choosing such a high > voltage PSU - because they didn't want to include a backlight inverter to > boost the voltage for the LCD backlight. I thus further suspect that I can > still talk to the serial port without the full voltage input... so if I > build a cable, is there a way I can tell which PBL I have from the serial > output?
See the first line of http://www.earth.li/%7Enoodles/files/delta.boot (linked from http://www.earth.li/~noodles/hardware-e3.html). Hope this helps, Antony. -- All generalisations are inaccurate. _______________________________________________ e3-hacking mailing list e3-hacking@earth.li http://www.earth.li/cgi-bin/mailman/listinfo/e3-hacking