On Thu, June 16, 2005 9:18, Jianliang Lu said: > Hi all, > I've some questions about configurations on eagle-usb. > We are using eagle-usb for modem Aethra eagle-II chip set, we'll > also try it for eagle-III chip set. From the AD data sheet we've > seen that only eagle-III supports the AAL1, AAL2 and AAL5 while > eagle-II supports only AAL5 (UBR).
> The question is how can we configure the modem for AALx > (CBR,VBR,UBR) for eagle-III? currently, we just do not know, we have not tried. > Is there any guide/howto for the configuratoin via CMV? only the pdf file that ADI gave us is publicly available. > Is eagle-II also supports CMV configuration? yes > The infoCMVEn on faq.eagle-usb is very poor, and the > "CMV Reference Manual" is too detailed to realize. > I've found in CMVep.txt that there are optn 70, optn 72 and optn > 73, but from the "Reference Manual" we have optn only till 15. > What's wrong? the document is not up to date, dates back 2002... ADI told us there may be an update, I just do not know if we'll get it, I hope so. > Thanks in advance for your help. we asked usbatm list if AALx are implemented : http://lists.infradead.org/pipermail/usbatm/2005-June/000611.html Their answer is : currently no, what would be the need for it, how can we test ? (which is what we wondered too, though we can identify a need for telephony). Could you elaborate ? Maybe you could try as well ueagle-atm : http://dev.eagle-usb.org/wakka.php?wiki=DevEagleUsbATM (configuration is a bit more manual till we adapt eagleconfig). @++ Ben'. aka baud123
