Le lun 23/08/2004 à 00:55, baud a écrit :
> Avec Sl33p3r et Tux nous vous proposons une version 1.9.9rc1 uniquement
> disponible pour tests
Test sur Mandrake10Official toute neuve, noyau 2.6.3-7mdksecure : OK
malgré quelques messages d'anomalies (voir le log joint). Pas
d'autostart on boot (je n'ai pas touché à drakconnect), startadsl pour
démarrer.
Test sur Slackware10 toute neuve, noyau 2.4.26 : OK sans message
d'anomalie, autostart on boot OK.
Dans les deux cas il m'a dit qu'il manquait quelque chose pour installer
la documentation.
La suite de ce message concerne eagleconnect.tcl
1. Caractères beaucoup trop petits sous mdk, "normaux" sous slack.
2. Cliquer sur un bouton "network stats" ou system diagnosis" donne :
can't read "identifiant": no such variable
can't read "identifiant": no such variable
while executing
"if {$identifiant == "root"} {
cd $EU_EAGLECONNECT_DIR; open "| wish reseau.tcl" "r"} else {
cd $EU_EAGLECONNECT_DIR; open "| wish reseau.tcl" "r"}"
invoked from within
".maframe.modem invoke"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w inveagleconnect :oke]"
(procedure "tk::ButtonUp" line 22)
invoked from within
"tk::ButtonUp .maframe.modem"
(command bound to event)
3. Help / EagleConnect Manual donne :
couldn't open
"/etc/eagle-usb/eagleconnect/doc/EagleConnectDocumentation.txt": no such
file or directory
couldn't open
"/etc/eagle-usb/eagleconnect/doc/EagleConnectDocumentation.txt": no such
file or directory
while executing
"open /etc/eagle-usb/eagleconnect/doc/EagleConnectDocumentation.txt r "
(procedure "aide" line 22)
invoked from within
"aide "
invoked from within
".barredemenu.lien.menu invoke active"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke active]"
(procedure "tk::MenuInvoke" line 47)
invoked from within
"tk::MenuInvoke .barredemenu.lien.menu 1"
(command bound to event)
4. Help / Configure EagleConnect ne donne rien
5. Help /about EagleConnect : OK. Il n'est pas interdit de citer
Christian Casteyde.
6. Disconnect OK
7. Connect OK
8. Modem reset : OK
9. Exit : OK
à+
Didier
PS hors sujet et limite troll :
Slackware : quand on dit de tout installer : *tout* est installé (pas
comme sur Man...ke où il manque toujours 20 sous pour faire un franc,
même en installant tout les paquets du groupe "développement").
Exemples de bénéfices pour installer de nouveaux logiciels :
- à partir de sources : eagle-usb (of course ; les sources du noyau
étaient installées, avec le lien symbolique linus), worker, nedit,
guarddog, libcdaudio, cdcd
- à partir d'un script : OpenOffice (a trouvé une installation Java)
- dans KDE on a d'un seul coup *toutes les applications* dans le menu
Seul bémol : pas d'Icewm en standard ;-) et mon clavier n'a pour
l'instant la bonne configuration que sous KDE :(
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# ./configure
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... yes
checking for main in -lc... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for uid_t in sys/types.h... yes
checking whether gcc needs -traditional... no
checking return type of signal handlers... void
checking for strftime... yes
checking for gettimeofday... yes
checking for select... yes
checking for socket... yes
checking for strcspn... yes
checking for strdup... yes
checking for strerror... yes
checking for strspn... yes
checking for strtol... yes
checking for ifconfig... yes
checking for route... yes
checking for pidof... yes
checking for dhclient... no
checking for dhcpcd... no
checking for pppd... yes
checking for pppoe... no
checking for xsltproc... no
*** libxslt-proc package is missing, documentation won't be build! ***
checking for kernel version...
checking for hotplug... 1
checking for ifup... 1
./configure: line 1: bc: command not found
./configure: line 4954: test: ==: unary operator expected
./configure: line 1: bc: command not found
./configure: line 4964: test: ==: unary operator expected
checking for adictrl... no
checking for eaglectrl... eaglectrl
configure: creating ./config.status
config.status: creating Makefile.common
========================================================================
distribution detected Mandrake
dhcp support no
pppd support yes
pppoa support yes
pppoe support no (runtime detection)
install eagleconnect (tcl/tk frontend) yes
generate documentation no
========================================================================
warning: a previous eagle-usb driver was found on your system.
You should run 'make uninstall' now.
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# make uninstall
make -C doc uninstall && \
make -C utils/scripts uninstall && \
make -C utils/eagleconnect uninstall && \
make -C pppoa uninstall && \
make -C driver uninstall && \
hash -r && \
echo -e
"==============================================================================="
&& \
echo -e "\n\nUninstall has finished." && \
if test 1 == 1 ; then \
echo -e "\n\n
********************************************************************\n" "* You
should now unplug and replug your modem to clear its memory. *\n"\
"********************************************************************\n\n" ; \
else \
echo ; \
fi
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
rm -f
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
./fctStopAdsl -sf
# disable [and remove] autostart service
if test -e /etc/init.d/eagle-usb ; then \
chkconfig --del eagle-usb &>/dev/null ; \
update-rc.d -f eagle-usb remove &>/dev/null ; \
rm -f /etc/init.d/eagle-usb ; \
fi
if test -e /etc/init.d/internet ; then \
chkconfig --del internet &>/dev/null ; \
fi
# remove old eagle-usb files (previous versions)
./uninstOld /lib/modules/2.6.3-7mdksecure /lib/modules/2.6.3-7mdksecure/build
Mandrake 10 1 && \
rm -f /usr/sbin/fctStartAdsl && \
rm -f /usr/sbin/fctStopAdsl && \
rm -f /usr/sbin/startmire && \
rm -f /usr/sbin/startadsl && \
rm -f /usr/sbin/stopadsl && \
rm -f /usr/sbin/eagleconfig && \
rm -f /usr/sbin/eaglediag && \
rm -f /etc/eagle-usb/scripts/eu_config_bash && \
rm -f /etc/hotplug/usb/eu_dsp && \
rm -f /etc/cron.d/eagle-usb && \
rm -f /etc/rc.d/rc.eagle-usb
ERROR: Module eagle_usb does not exist in /proc/modules
#rm -Rf /eagle-usb
rm -Rf /etc/eagle-usb/lang
rm -Rf /etc/eagle-usb/scripts
# uninstOld could have suppressed a module too => always run "depmod"
depmod -a
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
make[1]: Entering directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
rm -Rf /etc/eagle-usb/eagleconnect
make[1]: Leaving directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
rm -f /usr/sbin/pppoa
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
make -C ./firmware uninstall && \
make -C ./user uninstall && \
rm -f /lib/modules/2.6.3-7mdksecure/misc/eagle-usb.ko
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
rm -f /etc/eagle-usb/dsp/dsp_code_pots.bin /etc/eagle-usb/dsp/dsp_code_isdn.bin
# there may be better solution to do this :-/
if test -d /etc/eagle-usb/dsp && test -z "`ls /etc/eagle-usb/dsp`" ; then \
rm -Rf /etc/eagle-usb/dsp ; \
fi
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
rm -f /usr/sbin/eaglectrl
rm -f /usr/sbin/eaglestat
rm -f /etc/eagle-usb/scripts/eagle-usb.conf.template
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
===============================================================================
Uninstall has finished.
********************************************************************
* You should now unplug and replug your modem to clear its memory. *
********************************************************************
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# make clean
make -C driver clean && \
make -C pppoa clean && \
make -C utils/eagleconnect clean && \
make -C utils/scripts clean && \
make -C doc clean
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
make -C ./user clean
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
rm -f eaglectrl
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
make -C ./firmware clean
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
rm -f buildDSP dsp_code_isdn.bin dsp_code_pots.bin
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
rm -f *.o pppoa
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
make[1]: Entering directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
rm -Rf tmp
make[1]: Leaving directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
rm -Rf tmp
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
rm -f
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# make
make -C driver && \
make -C pppoa && \
make -C utils/scripts && \
make -C utils/eagleconnect && \
make -C doc
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
make -C /lib/modules/2.6.3-7mdksecure/build
SUBDIRS=/home/logiciels/eagle-usb-1.9.9rc1/driver modules
make[2]: Entering directory `/usr/src/linux-2.6.3-7mdk'
HOSTCC scripts/modpost.o
HOSTLD scripts/modpost
*** Warning: Overriding SUBDIRS on the command line can cause
*** inconsistencies
make[3]: « arch/i386/kernel/asm-offsets.s » est à jour.
CHK include/asm-i386/asm_offsets.h
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/eu_main.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/eu_utils.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Pipes.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Me.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Sm.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/eu_msg.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Dsp.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Mpoa.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Uni.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Sar.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/Oam.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/eu_eth.o
CC [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/eu_boot_sm.o
LD [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/eagle-usb.o
Building modules, stage 2.
MODPOST
CC /home/logiciels/eagle-usb-1.9.9rc1/driver/eagle-usb.mod.o
LD [M] /home/logiciels/eagle-usb-1.9.9rc1/driver/eagle-usb.ko
make[2]: Leaving directory `/usr/src/linux-2.6.3-7mdk'
make -C ./firmware
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
gcc -O2 -pipe -Wall -pedantic builddsp.c -o buildDSP
./buildDSP -d sagem/pots dsp_code_pots.bin
Reading file sagem/pots/rtbldep0.bnm
Reading file sagem/pots/rtbldep1.bnm
Reading file sagem/pots/rtbldep2.bnm
Reading file sagem/pots/rtbldep3.bnm
Reading file sagem/pots/rtbldep4.bnm
Writing file dsp_code_pots.bin
./buildDSP -d sagem/isdn dsp_code_isdn.bin
Reading file sagem/isdn/rtbldei0.bnm
Reading file sagem/isdn/rtbldei1.bnm
Reading file sagem/isdn/rtbldei2.bnm
Reading file sagem/isdn/rtbldei3.bnm
Reading file sagem/isdn/rtbldei4.bnm
Writing file dsp_code_isdn.bin
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
make -C ./user
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
gcc -O2 -pipe -Wall -pedantic -DLINUX -g -DCONF_DIR="\"/etc/eagle-usb\""
-DBIN_DIR="\"/etc/eagle-usb/dsp\"" '-DEAGLEUSBVERSION="1.9.9"' eaglectrl.c -o
eaglectrl
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic '-DVERSION="1.9.9"' -c -o
pppoa.o pppoa.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic '-DVERSION="1.9.9"' -c -o
if.o if.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic '-DVERSION="1.9.9"' -c -o
debug.o debug.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic '-DVERSION="1.9.9"' -c -o
common.o common.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic '-DVERSION="1.9.9"' -c -o
ppp.o ppp.c
gcc -o pppoa pppoa.o if.o debug.o common.o ppp.o
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
rm -Rf tmp
mkdir -p tmp
cat setvars | sed \
-e "s|@SBIN_DIR@|/usr/sbin|g" \
-e "s|@EU_DIR@|/etc/eagle-usb|g" \
-e "s|@EU_LANG_DIR@|/etc/eagle-usb/lang|g" \
-e "s|@EU_SCRIPT_DIR@|/etc/eagle-usb/scripts|g" \
-e "s|@USE_HOTPLUG@|1|g" \
-e "s|@USE_IFUPDOWN@|1|g" \
-e "s|@DISTRIB@|Mandrake|g" \
-e "s|@DISTVER@|10|g" \
-e "s|@SIMPLE@|0|g" \
-e "s|@INIT_DIR@|/etc/init.d|g" \
-e "s|@PPP_DIR@|/etc/ppp|g" \
-e "s|@HOTPLUG_SCRIPT_DIR@|/etc/hotplug/usb|g" \
-e "s|@NET_SCRIPT_DIR@|/etc/sysconfig/network-scripts|g" \
-e "s|@EU_LANG@|auto|g" \
-e "s|@PPP_OPTIONS_DIR@|/etc/ppp/peers|g" \
-e "s|@PPP_OPTIONS_ADSL@|/etc/ppp/peers/adsl|g" \
-e "s|@PPP_OPTIONS_MIRE@|/etc/ppp/peers/mire|g" \
-e "s|@SYSCONF_FILE@|/var/lock/subsys/eagle-usb|g" \
> tmp/setvars && \
sed -e "s|exit 123|. /etc/eagle-usb/scripts/setvars|" -e "s| 1 == 1 | 0 == 1 |"
fctStopAdsl > tmp/fctStopAdsl && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" fctStartAdsl >
tmp/fctStartAdsl && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" startmire > tmp/startmire
&& \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" startadsl > tmp/startadsl
&& \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" stopadsl > tmp/stopadsl && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eagleconfig >
tmp/eagleconfig && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eaglediag > tmp/eaglediag
&& \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eu_config_bash >
tmp/eu_config_bash && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eu_dsp > tmp/eu_dsp && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eu_init > tmp/eu_init && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" rc.eagle-usb >
tmp/rc.eagle-usb && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" net_cnx_up > tmp/net_cnx_up
&& \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" net_cnx_down >
tmp/net_cnx_down && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" testconnec > tmp/testconnec
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
make[1]: Entering directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
rm -Rf tmp
if test 1 == 1 ; then \
mkdir -p tmp ; \
cat diagnostic.tcl | sed \
-e "s|@SBIN_DIR@|/usr/sbin|g" \
-e "s|@EU_EAGLECONNECT_DIR@|/etc/eagle-usb/eagleconnect|g" \
> tmp/diagnostic.tcl ; \
cat eagleconnect.tcl | sed \
-e "s|@SBIN_DIR@|/usr/sbin|g" \
-e "s|@EU_EAGLECONNECT_DIR@|/etc/eagle-usb/eagleconnect|g" \
> tmp/eagleconnect.tcl ; \
cat reseau.tcl | sed \
-e "s|@SBIN_DIR@|/usr/sbin|g" \
-e "s|@EU_EAGLECONNECT_DIR@|/etc/eagle-usb/eagleconnect|g" \
> tmp/reseau.tcl ; \
fi
make[1]: Leaving directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
make[1]: Rien à faire pour « all ».
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# make install
make -C driver install && \
make -C pppoa install && \
make -C utils/scripts install && \
make -C utils/eagleconnect install && \
make -C doc install && \
hash -r && \
echo -e
"==============================================================================="
&& \
echo -e "\n\nInstallation has finished!\nYou should now run eagleconfig to
setup your connexion.\n\n"
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
make -C ./firmware install
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
/usr/bin/install -c -d /etc/eagle-usb/dsp && \
/usr/bin/install -c -m 0664 dsp_code_pots.bin /etc/eagle-usb/dsp
/usr/bin/install -c -m 0664 dsp_code_isdn.bin /etc/eagle-usb/dsp
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/firmware'
make -C ./user install
make[2]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
/usr/bin/install -c -d /usr/sbin && \
/usr/bin/install -c -d /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0755 eaglectrl /usr/sbin && \
/usr/bin/install -c -m 0755 eaglestat /usr/sbin && \
/usr/bin/install -c -m 0644 eagle-usb.conf
/etc/eagle-usb/scripts/eagle-usb.conf.template
make[2]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver/user'
/usr/bin/install -c -d /lib/modules/2.6.3-7mdksecure/misc && \
/usr/bin/install -c -m 0644 eagle-usb.ko
/lib/modules/2.6.3-7mdksecure/misc/eagle-usb.ko
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/driver'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
/usr/bin/install -c -d /usr/sbin
/usr/bin/install -c -m 755 pppoa /usr/sbin
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/pppoa'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
if test 1 == 1 ; then \
/usr/bin/install -c -d /etc/sysconfig/network-scripts && \
/usr/bin/install -c -m 0755 tmp/net_cnx_up
/etc/sysconfig/network-scripts && \
/usr/bin/install -c -m 0755 tmp/net_cnx_down
/etc/sysconfig/network-scripts && \
/usr/bin/install -c -m 0755 net_cnx_pg /etc/sysconfig/network-scripts ;
\
fi
/usr/bin/install -c -d /usr/sbin && \
/usr/bin/install -c -d /etc/eagle-usb/lang && \
/usr/bin/install -c -d /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0755 tmp/setvars /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0755 tmp/fctStartAdsl /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/fctStopAdsl /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/startmire /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/startadsl /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/stopadsl /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/eaglediag /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/eagleconfig /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/eu_config_bash /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0755 tmp/eu_dsp /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0755 tmp/testconnec /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0644 usb.usermap /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0644 options /etc/eagle-usb/scripts && \
/usr/bin/install -c -m 0644 lang/de /etc/eagle-usb/lang && \
/usr/bin/install -c -m 0644 lang/en /etc/eagle-usb/lang && \
/usr/bin/install -c -m 0644 lang/es /etc/eagle-usb/lang && \
/usr/bin/install -c -m 0644 lang/fr /etc/eagle-usb/lang && \
/usr/bin/install -c -m 0644 lang/f2 /etc/eagle-usb/lang && \
/usr/bin/install -c -m 0644 lang/it /etc/eagle-usb/lang && \
/usr/bin/install -c -m 0644 lang/pl /etc/eagle-usb/lang && \
/usr/bin/install -c -m 0644 lang/p2 /etc/eagle-usb/lang && \
if test "Mandrake" = "Slackware" ; then \
/usr/bin/install -c -m 0755 tmp/rc.eagle-usb /etc/eagle-usb/scripts ; \
else \
/usr/bin/install -c -m 0755 tmp/eu_init /etc/eagle-usb/scripts ; \
fi
touch /etc/eagle-usb/scripts/lock; chmod 644 /etc/eagle-usb/scripts/lock
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/utils/scripts'
make[1]: Entering directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
if test 1 == 1 ; then \
/usr/bin/install -c -d /usr/sbin && \
/usr/bin/install -c -d /etc/eagle-usb/eagleconnect/lang && \
/usr/bin/install -c -m 0755 parameagleconnect.tcl
/etc/eagle-usb/eagleconnect && \
/usr/bin/install -c -m 0755 tmp/diagnostic.tcl
/etc/eagle-usb/eagleconnect && \
/usr/bin/install -c -m 0755 tmp/eagleconnect.tcl /usr/sbin && \
/usr/bin/install -c -m 0755 tmp/reseau.tcl /etc/eagle-usb/eagleconnect
&& \
/usr/bin/install -c -m 0644 lang/fr.msg
/etc/eagle-usb/eagleconnect/lang && \
/usr/bin/install -c -m 0644 eagleconnect.conf
/etc/eagle-usb/eagleconnect/eagleconnect.conf.template ; \
fi
make[1]: Leaving directory
`/home/logiciels/eagle-usb-1.9.9rc1/utils/eagleconnect'
make[1]: Entering directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
if [ -n "" ]; then \
/usr/bin/install -c -d /usr/man/man8; \
cp /usr/man/man8; \
fi
make[1]: Leaving directory `/home/logiciels/eagle-usb-1.9.9rc1/doc'
===============================================================================
Installation has finished!
You should now run eagleconfig to setup your connexion.
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# eagleconfig
==============================================================================
=================== Configuration de votre connexion ADSL ====================
==============================================================================
Votre modem doit être branché avant de continuer.
Vous pouvez à tout moment interrompre ce script avec [Ctrl][c]
Choisissez votre méthode de connexion :
_______________________________________________________________________
. . . Pays . . . . Réseau . . . . . . . . . VPI VCI ENC
-----------------------------------------------------------------------
AT01 : Austria ???? 01 20 06 PPPoA VC
BE01 : Belgique Belgacom, Tiscali.be 08 23 06 PPPoA VC
BR01 : Brasil Speedy/Telefonica 08 23 01 PPPoE LLC
BR02 : Brasil Velox/Telemar 00 21 01 PPPoE LLC
BR03 : Brasil Turbo/Brasil Telecom 00 23 01 PPPoE LLC
BR04 : Brasil Rio Grande do Sul (RS) 01 20 01 PPPoE LLC
BG01 : Bulgaria BTK POTS 00 23 01 PPPoE LLC
BG02 : Bulgaria BTK ISDN 01 20 01 PPPoE LLC
DK01 : Denmark ???? 00 65 03 Routed IP LLC
DE01 : Deutschland DT (D.Telecom, 1&1...) 01 20 01 PPPoE LLC
ES01 : España Telefonica 08 20 01 PPPoE LLC
ES02 : España Telefonica 08 20 03 Routed IP LLC
ES03 : España Retevision, Eresmas... 08 23 06 PPPoA VC
ES04 : España Tiscali 01 20 ?? ????
FI01 : Finland Sonera 00 64 03 Routed IP LLC
FR01 : France FT (Free, Wanadoo...) 08 23 06 PPPoA VC
FR02 : France FT (Free, Wanadoo...) 08 23 01 PPPoE LLC
FR03 : France Tiscali 128k 08 23 05 PPPoA LLC
FR04 : France Free dégroupé 08 24 04 Routed IP VC
FR05 : France 9online dégroupé ou non 08 23 06 PPPoA VC
FR06 : France Club-internet, télé2 08 23 06 PPPoA VC
FR07 : France Tiscali.fr 512k 08 23 06 PPPoA VC
GR01 : Greece ???? 08 23 06 PPPoA VC
HU01 : Hungary Matav 01 20 01 PPPoE LLC
IE01 : Ireland ???? 08 23 01 PPPoE LLC
IT01 : Italia Telecom Italia, Tiscali 08 23 06 PPPoA VC
IT02 : Italia MClink 08 4B ?? ????
IT03 : Italia Telecom Italia office 08 23 03 Routed IP LLC
NL01 : Netherlands KPN 08 30 06 PPPoA VC
PL01 : Polska Telekomunikacja Polska 00 23 06 PPPoA VC
PT01 : Portugal PT 00 23 01 PPPoE LLC
SE01 : Sweden Telia 08 23 01 PPPoE LLC
CH01 : Switzerland ???? 08 35 03 Routed IP LLC
CH02 : Switzerland BlueWin (Swisscom) 08 23 05 PPPoA LLC
UK01 : UK BT (Tiscali...) 00 26 06 PPPoA VC
-----------------------------------------------------------------------
?[FR04]FR04
Pour utiliser une IP statique, vous devez la spécifier maintenant; pour
obtenir l'IP à partir de votre fournisseur, appuyez simplement sur 'Entrée':
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# eagleconfig --expert
==============================================================================
=================== Configuration de votre connexion ADSL ====================
==============================================================================
Votre modem doit être branché avant de continuer.
Vous pouvez à tout moment interrompre ce script avec [Ctrl][c]
Choisissez votre méthode de connexion :
_______________________________________________________________________
. . . Pays . . . . Réseau . . . . . . . . . VPI VCI ENC
-----------------------------------------------------------------------
AT01 : Austria ???? 01 20 06 PPPoA VC
BE01 : Belgique Belgacom, Tiscali.be 08 23 06 PPPoA VC
BR01 : Brasil Speedy/Telefonica 08 23 01 PPPoE LLC
BR02 : Brasil Velox/Telemar 00 21 01 PPPoE LLC
BR03 : Brasil Turbo/Brasil Telecom 00 23 01 PPPoE LLC
BR04 : Brasil Rio Grande do Sul (RS) 01 20 01 PPPoE LLC
BG01 : Bulgaria BTK POTS 00 23 01 PPPoE LLC
BG02 : Bulgaria BTK ISDN 01 20 01 PPPoE LLC
DK01 : Denmark ???? 00 65 03 Routed IP LLC
DE01 : Deutschland DT (D.Telecom, 1&1...) 01 20 01 PPPoE LLC
ES01 : España Telefonica 08 20 01 PPPoE LLC
ES02 : España Telefonica 08 20 03 Routed IP LLC
ES03 : España Retevision, Eresmas... 08 23 06 PPPoA VC
ES04 : España Tiscali 01 20 ?? ????
FI01 : Finland Sonera 00 64 03 Routed IP LLC
FR01 : France FT (Free, Wanadoo...) 08 23 06 PPPoA VC
FR02 : France FT (Free, Wanadoo...) 08 23 01 PPPoE LLC
FR03 : France Tiscali 128k 08 23 05 PPPoA LLC
FR04 : France Free dégroupé 08 24 04 Routed IP VC
FR05 : France 9online dégroupé ou non 08 23 06 PPPoA VC
FR06 : France Club-internet, télé2 08 23 06 PPPoA VC
FR07 : France Tiscali.fr 512k 08 23 06 PPPoA VC
GR01 : Greece ???? 08 23 06 PPPoA VC
HU01 : Hungary Matav 01 20 01 PPPoE LLC
IE01 : Ireland ???? 08 23 01 PPPoE LLC
IT01 : Italia Telecom Italia, Tiscali 08 23 06 PPPoA VC
IT02 : Italia MClink 08 4B ?? ????
IT03 : Italia Telecom Italia office 08 23 03 Routed IP LLC
NL01 : Netherlands KPN 08 30 06 PPPoA VC
PL01 : Polska Telekomunikacja Polska 00 23 06 PPPoA VC
PT01 : Portugal PT 00 23 01 PPPoE LLC
SE01 : Sweden Telia 08 23 01 PPPoE LLC
CH01 : Switzerland ???? 08 35 03 Routed IP LLC
CH02 : Switzerland BlueWin (Swisscom) 08 23 05 PPPoA LLC
UK01 : UK BT (Tiscali...) 00 26 06 PPPoA VC
-----------------------------------------------------------------------
?[FR04]
Pour utiliser une IP statique, vous devez la spécifier maintenant; pour
obtenir l'IP à partir de votre fournisseur, appuyez simplement sur 'Entrée':
81.578.28.169
Your /etc/resolv.conf contains the following lines:
==============================================================================
nameserver 213.200.100.70
nameserver 213.200.100.71
==============================================================================
You can modify this file manually if it contains wrong DNS.
Voulez-vous que la connexion soit lancée automatiquement au démarrage ? [o]/no
Voulez-vous activer une tâche 'cron' qui contrôle la connexion toutes les 2
minutes
et la relance en cas de coupure ? o/[n]n
Vous pouvez saisir le nom de l'interface virtuelle liée au modem. Pour laisser
le noyau déterminer automatiquement cette valeur, saisissez "auto" :
[auto]
/usr/sbin/eagleconfig: line 1: bc: command not found
/usr/sbin/eagleconfig: line 284: [: ==: unary operator expected
Chargement du module... [ OK ]
Chargement du DSP & options... [ OK ]
Attente modem opérationnel... [ OK ]
Configuration réussie.
Vous pouvez maintenant lancer "startadsl" pour démarrer la connexion.
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]# startadsl
[EMAIL PROTECTED] eagle-usb-1.9.9rc1]#
