hello again,
baud wrote:
> fine, this means our *.bnm files may be compatible >
with your modem
> (that'=
> s most of the time the case)
btw, i built my kernel with frame pointers enabled so
that i might be able to offer a stack trace for debug
of the wait_ms issue. here's what i found from my
dmesg:
===
[eagle-usb] driver V2 loaded
[eagle-usb] New USB ADSL device detected, waiting for
DSP code...
[eagle-usb] Interface 0 accepted.
[eagle-usb] created proc entry at :
/proc/driver/eagle-usb/002-002
usbcore: registered new driver eagle-usb
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
EXT3 FS on hda2, internal journal
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
device-mapper: 4.1.0-ioctl (2003-12-10) initialised:
[EMAIL PROTECTED]
Badness in wait_ms at
/root/eagle-usb-1.9.8/driver/macros.h:133
[<c0106059>] dump_stack+0x15/0x17
[<e0280e71>] IdmaUploadSwapPage+0x186/0x25e
[eagle_usb]
=======================
[<c0106059>] dump_stack+0x15/0x17
[<e0280e71>] IdmaUploadSwapPage+0x186/0x25e
[eagle_usb]
Adding 1044216k swap on /dev/hda3. Priority:-1
extents:1
===
so perhaps UploadSwapPage is doing something
undesirable.
> what is the content of your config file for pppd ?
by this, i assume you mean /etc/ppp/peers/adsl
===
user "[EMAIL PROTECTED]"
pty "/usr/local/sbin/pppoe -I
`/usr/local/sbin/fctStartAdsl -i`"
mru 1492
mtu 1492
noipdefault
defaultroute
usepeerdns
noauth
#ipcp-accept-remote
#ipcp-accept-local
nobsdcomp
nodeflate
nopcomp
novj
novjccomp
noaccomp -am
persist
kdebug 5
passive
debug
lcp-echo-interval 20
lcp-echo-failure 3
===
i was able to confirm on a friends setup using an
aztech ethernet adsl modem, that the setting of
mru/mtu 1492, also using rp pppoe, was succesfull.
i attempted varying lcp-echo-failure and
lcp-echo-interval both upwards and downwards but no
noticable effect. startadsl -d does pass the right
options to pppd. from ps output, i can see pppd debug
but no increased verbosity seen in /var/log/messages.
i'll need to see if i need to modify my syslogd.conf
in case any of the debug msgs are being filtered. i
also tried putting in kdebug and debug into the adsl
file but no change. so i believe this means i need to
modify my syslogd.conf.
i will post again as soon as i have further info.
please let me know if anyone wants to look at the
wait_ms/IdmaUploadSwapPage issue. if desirable, i can
setup kdb on this kernel and see if i can help someone
knowledgable to debug/resolve the issue.
thanks,
melkor
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail
