Come on "itpweb1". It is now time that you make your own debugging. Where are you from? "it" suggests Italy. If so, let us not disturb so much the Easy400Group. Write to me at [EMAIL PROTECTED] Initial hints: - the external stream file does not exist - the *public is *EXCLUDEd
Keep going, Giovanni ----- Original Message ----- From: "itpweb1" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, January 13, 2006 8:16 PM Subject: [Easy400Group] Re: trouble installing websecure. - solved > To understand a new technique, I find the best way is to take a > program that works well enough and keep changing it until it breaks. > ...Well it didn't take long today. > > To start, I wanted to replace gethtml() with IfsMultIndicators() and > move my html template /websecure/html/DSPVLDLmcc.html to IFS > > * Load the external HTML > > C** callp gethtml('HTMLSRC': > > C** 'WEBSECURE':'DSPVLDL') > > * Read externally defined output html files > > C eval IfsMultIndicators = gethtmlifsmult( > > C '/websecure/html/DSPVLDLmmc.html') > > > > Then I had to swap some prototype files and add in some required > variables to make it work. > *================================================= > /copy websecure/qrpglesrc,hspecs > /copy websecure/qrpglesrc,hspecsbnd > /copy websecure/qrpglesrc,prototypeb > ***/copy websecure/qrpglesrc,usec > ***/copy websecure/qrpglesrc,variables3 > /copy cgidev2/qrpglesrc,usec > *================================================= > > > Binds and compiles fine, but when I run it I get: > > "Cannot read script output pipe." error > > 00152 GetHtmlIfsMult: Could not access IFS file > /websecure/html/DSPVLDLmmc.html. File is being ignored. > 00133 GetHtmlIfsMult: None of the requested files was usable. No > files were read and no externally desc > 00034 WrtSection: Section TOP not found. > > 00034 WrtSection: Section END not found. > > > Do I have to define /websecure in Apache setup to make it accessible > to gethtmlifsmult? > > > > > --- In [email protected], "Giovanni B. Perotti" > <[EMAIL PROTECTED]> wrote: >> >> Answers from Giovanni: >> >> 1- January 10th, 2006 WEBSECURE release just was added the RST >> DEV('/qsys.lib/websecure.lib/websecure.file') OBJ(('/websecure')) > line that >> was missing in the INSTALL program >> 2- Validation list entries can just be accessed via API's. This was the >> reason for writing the Validation List Utility "websecure/wrkvldl" > (see page >> http://www.easy400.net/websech/vldlut.mbr ). To retrieve a > validation list >> entry, you may use module "wrkvldle" included in the utility. >> >> Suggestion for incorporating validation list security to an existing >> application: >> - have a "user" database file, keyed on the usernames (the same used > in the >> validation list). >> - have it maintained through the same program that maintains the > validation >> list >> - in the "user" database files have other fields such as name, > department, >> address, etc.. Flag fields specifying the authorized applications > the user >> may access, may further help you in implementing other security checks. >> Obviously never add a field containing the user password, it would be >> against ... security. >> >> Giovanni >> ----- Original Message ----- >> From: "itpweb1" <[EMAIL PROTECTED]> >> To: <[email protected]> >> Sent: Friday, January 13, 2006 4:12 PM >> Subject: [Easy400Group] Re: trouble installing websecure. - solved >> >> >> >I got the examples working. ref: > http://www.easy400.net/websech/vldlut.mbr >> > >> > Today's goal is to incorporate validation list security into an >> > existing application. Any tips appreciated. >> > >> > Giovanni: I installed WEBSECURE January 7th. Does new version of (Jan >> > 10th) have anything that I shoud have other than the missing line >> > RST DEV('/qsys.lib/websecure.lib/websecure.file') OBJ(('/websecure')) >> > In other words, should I re-install with new version? >> > >> > Also. Is it possible to "Chain" into a validation list on a specific >> > user ID, like a keyed PF? >> > >> > thanks >> > >> > >> > >> > >> > >> > >> > --- In [email protected], "Giovanni B. Perotti" >> > <[EMAIL PROTECTED]> wrote: >> >> >> >> For some unkown reason you failed to restore directory /websecure. >> >> >> >> Please run the following command as QSECOFR: >> >> RST DEV('/qsys.lib/websecure.lib/websecure.file') OBJ(('/websecure')) >> >> >> >> Giovanni >> >> ----- Original Message ----- >> >> From: "itpweb1" <[EMAIL PROTECTED]> >> >> To: <[email protected]> >> >> Sent: Monday, January 09, 2006 4:06 PM >> >> Subject: [Easy400Group] trouble installing websecure. >> >> >> >> >> >> > >> >> > I am having trouble installing websecure. >> >> > >> >> > Command RSTLIB SAVLIB(WEBSECURE) was successful. >> >> > >> >> > I ran "STRREXPRC SRCMBR(INSTALL) SRCFILE(WEBSECURE/QREXSRC)" >> >> > installation fails at " CHGVAR VAR(&PCFILE) VALUE >> >> > ('/websecure/case03try.htm')" >> >> > >> >> > with this message: >> >> > >> >> > >> >> > QPADEV000K User . . . . . . : QSECOFR >> >> > Number . . . . . . . >> >> > . . . . : 09 >> >> > QDFTJOBD Library . . . . . : >> >> > QGPL >> >> > SEV DATE TIME FROM PGM LIBRARY INST > TO >> >> > PGM >> >> > LIBRARY >> >> > To procedure . . . . . . . : >> >> > INSTALL >> >> > Statement . . . . . . . . . : >> >> > 23000 >> >> > Message . . . . : Object not found. Object is >> >> > /websecure/case03try.htm. >> >> > Cause . . . . . : Object /websecure/case03try.htm, or a >> >> > directory in >> >> > the object path, could not be found, or its type cannot be >> >> > resolved by >> >> > this function. Recovery . . . : Correct the name or specify >> >> > an object >> >> > of the correct type. To determine if the object exists, use the >> >> > Work with >> >> > Object Links (WRKLNK) command. If the name exists, check the >> >> > type of the >> >> > object. If the name contains symbolic link objects, ensure the >> >> > path names they >> >> > resolve >> >> > >> >> > >> >> > >> >> > /websecure directory and related files on IFS has not been created >> >> > and I don't see where they would come from. >> >> > >> >> > I am using QSECOFR with full authority. >> >> > >> >> > Any ideas? >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > Yahoo! Groups Links >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> >> > >> > >> > >> > >> > >> > >> > Yahoo! Groups Links >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Easy400Group/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
