Hi, This is the eb file I used, following your instructions. Is there something wrong with this?
easyblock = 'ConfigureMake' name = "lm-sensors" version = "3.4.0" homepage = "https://github.com/groeck/lm-sensors"; description = """The lm-sensors package, provides user-space support for the hardware monitoring drivers in Linux. """ buildopts = 'all' toolchain = {'name': 'dummy', 'version': ''} source_urls = ['https://github.com/groeck/lm-sensors.git'] sources = [SOURCE_TAR_GZ] checksums = ['e79c58404f8d792c153207a957b1ed59ed5df109b25482a39526106a4a4acbd3'] dependencies = [('GCC', '4.9.2'), ('Bison', '3.0.4'), ('flex', '2.6.0')] skipsteps = ['configure'] installopts = 'PREFIX=%(installdir)s/' installopts = 'ETCDIR=%(installdir)s/etc/' moduleclass = "lang" Yours sincerely, *Joseph John* *Assistant Professor* *Department of Computer Science & Engineering* *Rajagiri School of Engineering & Technology* *https://josephjohnjj.github.io/ <https://josephjohnjj.github.io/>* On Fri, May 4, 2018 at 2:19 PM, Pablo Escobar Lopez < pablo.escobarlo...@unibas.ch> wrote: > it looks like your not properly passing the install prefix to the > makefile. you have an example in the easyconfig I pointed as reference > > https://github.com/easybuilders/easybuild-easyconfigs/blob/ > 68176cd383d3bc3569894bced5a3fda001d0e4fb/easybuild/ > easyconfigs/l/LuaJIT/LuaJIT-2.0.2-GCC-4.9.2.eb#L20 > > > > On Fri, May 4, 2018 at 10:35 AM, Mr. Joseph John < > jose...@rajagiritech.edu.in> wrote: > >> Hi, >> >> I tried ETCDIR=%(installdir)s/etc/, but now I am getting error in another >> directory (/usr/). Is there a way to solve this for all the directories? >> >> == 2018-05-04 04:29:53,745 easyblock.py:870 DEBUG Creating the >> installation directory /sNow/easybuild/centos/7.3.161 >> 1/Broadwell/software/lm-sensors/3.4.0 (cleanup: True) >> == 2018-05-04 04:29:53,745 easyblock.py:881 INFO Found old directory >> /sNow/easybuild/centos/7.3.1611/Broadwell/software/lm-sensors/3.4.0 >> == 2018-05-04 04:29:53,746 filetools.py:1203 INFO Path >> /sNow/easybuild/centos/7.3.1611/Broadwell/software/lm-sensors/3.4.0 >> successfully removed. >> == 2018-05-04 04:29:53,746 easyblock.py:888 INFO Removed old directory >> /sNow/easybuild/centos/7.3.1611/Broadwell/software/lm-sensors/3.4.0 >> == 2018-05-04 04:29:53,746 filetools.py:1107 INFO Creating directory >> /sNow/easybuild/centos/7.3.1611/Broadwell/software/lm-sensors/3.4.0 >> (parents: True, set_gid: False, sticky: False) >> == 2018-05-04 04:29:53,747 easyblock.py:2452 INFO Running method >> install_step part of step install >> == 2018-05-04 04:29:53,747 run.py:163 DEBUG run_cmd: running cmd make >> install >> ETCDIR=/sNow/easybuild/centos/7.3.1611/Broadwell/software/lm-sensors/3.4.0/etc/ >> (in /sNow/easybuild/centos/7.3.1611/Broadwell/build/lmsensors/3. >> 4.0/dummy-/lm-sensors-master) >> == 2018-05-04 04:29:53,747 run.py:183 INFO running cmd: make install >> ETCDIR=/sNow/easybuild/centos/7.3.1611/Broadwell/software/lm >> -sensors/3.4.0/etc/ >> == 2018-05-04 04:29:53,825 build_log.py:158 ERROR EasyBuild crashed with >> an error (at easybuild/centos/7.3.1611/Broadwell/software/EasyBuild/3.5. >> 0/lib/python2.7/site-packages/vsc_base-2.5.8-py2.7.egg/vsc/utils/exceptions.py:124 >> in __init__): cmd " make install ETCDIR=/sNow/easybuild/centos/ >> 7.3.1611/Broadwell/software/lm-sensors/3.4.0/etc/" exited with exit code >> 2 and output: >> mkdir -p /usr/local/lib /usr/local/include/sensors /usr/local/man/man3 >> /usr/local/man/man5 >> mkdir: cannot create directory '/usr/local/include/sensors': Read-only >> file system >> mkdir: cannot create directory '/usr/local/man': Read-only file system >> mkdir: cannot create directory '/usr/local/man': Read-only file system >> make: *** [install-lib] Error 1 >> (at easybuild/centos/7.3.1611/Broadwell/software/EasyBuild/3.5. >> 0/lib/python2.7/site-packages/easybuild_framework-3.5.0-py2. >> 7.egg/easybuild/tools/run.py:481 in parse_cmd_output) >> == 2018-05-04 04:29:53,825 easyblock.py:2685 WARNING build failed (first >> 300 chars): cmd " make install ETCDIR=/sNow/easybuild/centos/ >> 7.3.1611/Broadwell/software/lm-sensors/3.4.0/etc/" exited with exit code >> 2 and output: >> mkdir -p /usr/local/lib /usr/local/include/sensors /usr/local/man/man3 >> /usr/local/man/man5 >> mkdir: cannot create directory '/usr/local/include/sensors': Read-only fi >> == 2018-05-04 04:29:53,825 easyblock.py:279 INFO Closing log for >> application name lm-sensors version 3.4.0 >> >> Yours sincerely, >> >> >> >> *Joseph John * >> >> *Assistant Professor * >> >> *Department of Computer Science & Engineering * >> *Rajagiri School of Engineering & Technology* >> *https://josephjohnjj.github.io/ <https://josephjohnjj.github.io/>* >> >> On Wed, May 2, 2018 at 2:54 PM, Mikael Öhman <micket...@gmail.com> wrote: >> >>> Hi Joseph, >>> >>> You should (probably?) avoid system paths. >>> I took a peak in the makefiles and I think another installopts is >>> suitable here: >>> >>> ETCDIR=%(installdir)s/etc/ >>> >>> (looks like this path gets hardcoded into the binaries) >>> >>> Best regards, Mikael >>> >>> On Wed, May 2, 2018 at 7:33 AM, Mr. Joseph John < >>> jose...@rajagiritech.edu.in> wrote: >>> >>>> Hi, >>>> >>>> I tried to install using the following eb file : >>>> >>>> easyblock = 'ConfigureMake' >>>> >>>> name = "lm-sensors" >>>> version = "3.4.0" >>>> >>>> homepage = "https://github.com/groeck/lm-sensors"; >>>> description = """The lm-sensors package, provides user-space support >>>> for the >>>> hardware monitoring drivers in Linux. """ >>>> >>>> buildopts = 'all' >>>> >>>> toolchain = {'name': 'dummy', 'version': ''} >>>> >>>> source_urls = ['https://github.com/groeck/lm-sensors.git'] >>>> sources = [SOURCE_TAR_GZ] >>>> checksums = ['e79c58404f8d792c153207a957b1 >>>> ed59ed5df109b25482a39526106a4a4acbd3'] >>>> >>>> dependencies = [('GCC', '4.9.2'), ('Bison', '3.0.4'), ('flex', '2.6.0')] >>>> >>>> skipsteps = ['configure'] >>>> installopts = 'PREFIX=%(installdir)s' >>>> >>>> moduleclass = "lang" >>>> >>>> >>>> But i keep getting this error: >>>> >>>> mkdir -p /etc /etc/sensors.d >>>> mkdir: cannot create directory '/etc/sensors.d': Read-only file system >>>> make: *** [install-etc] Error 1 >>>> (at easybuild/centos/7.3.1611/Broadwell/software/EasyBuild/3.5.0 >>>> /lib/python2.7/site-packages/easybuild_framework-3.5.0-py2.7 >>>> .egg/easybuild/tools/run.py:481 in parse_cmd_output) >>>> == 2018-05-02 01:21:36,082 easyblock.py:2685 WARNING build failed >>>> (first 300 chars): cmd " make install PREFIX=/sNow/easybuild/centos/ >>>> 7.3.1611/Broadwell/software/lm-sensors/3.4.0" exited with exit code 2 >>>> and output: >>>> mkdir -p >>>> /sNow/easybuild/centos/7.3.1611/Broadwell/software/lm-sensors/3.4.0/lib >>>> /sNow/easybuild/centos/7.3.1611/Broadwell/software/lm-sensors/3.4.0/include/sensors >>>> /sNo >>>> == 2018-05-02 01:21:36,082 easyblock.py:279 INFO Closing log for >>>> application name lm-sensors version 3.4.0 >>>> >>>> Is there anyway to set these permissions through easybuild or should I >>>> change the permission separately? >>>> >>>> Yours sincerely, >>>> >>>> >>>> >>>> *Joseph John * >>>> >>>> *Assistant Professor * >>>> >>>> *Department of Computer Science & Engineering * >>>> *Rajagiri School of Engineering & Technology* >>>> *https://josephjohnjj.github.io/ <https://josephjohnjj.github.io/>* >>>> >>>> On Sun, Mar 25, 2018 at 1:10 AM, Pablo Escobar Lopez < >>>> pablo.escobarlo...@unibas.ch> wrote: >>>> >>>>> Hi Joseph, >>>>> >>>>> The installation procedure is "make all" and "make install" so it >>>>> shouldn't be difficult to install it using easybuild. Providing the >>>>> dependencies with easybuild shouldn't be difficult neither. >>>>> https://github.com/groeck/lm-sensors/blob/master/INSTALL >>>>> >>>>> You can use this easyconfig as reference >>>>> https://github.com/easybuilders/easybuild-easyconfigs/blob/6 >>>>> 8176cd383d3bc3569894bced5a3fda001d0e4fb/easybuild/easyconfig >>>>> s/l/LuaJIT/LuaJIT-2.0.2-GCC-4.9.2.eb >>>>> >>>>> I think the only missing detail in that easyconfig is >>>>> buildopts = 'all' >>>>> >>>>> You still need proper support from your kernel but I guess this should >>>>> be provided by most modern distributions out of the box. >>>>> >>>>> regards, >>>>> Pablo. >>>>> >>>>> >>>>> On Sat, Mar 24, 2018 at 6:52 AM, Mr. Joseph John < >>>>> jose...@rajagiritech.edu.in> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I there anyay to install lm-sensors using easybuild? >>>>>> >>>>>> yours sincerely, >>>>>> >>>>>> >>>>>> *Joseph John * >>>>>> >>>>>> *Assistant Professor * >>>>>> >>>>>> *Department of Computer Science & Engineering * >>>>>> *Rajagiri School of Engineering & Technology* >>>>>> *https://josephjohnjj.github.io/ <https://josephjohnjj.github.io/>* >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Pablo Escobar López >>>>> Linux/HPC systems engineer >>>>> sciCORE, University of Basel >>>>> SIB Swiss Institute of Bioinformatics >>>>> http://scicore.unibas.ch >>>>> >>>> >>>> >>> >> > > > -- > Pablo Escobar López > Linux/HPC systems engineer > sciCORE, University of Basel > SIB Swiss Institute of Bioinformatics >
