Some routers do not support loopback connections (connect from inside your
network to your routers IP address that routes back into your network) and
some can be configured to block outgoing ports (you only open the ports you
need). You need to be sure these are not problems on your router.
Mark
On Fri, May 30, 2008 at 1:31 PM, Peter White <[EMAIL PROTECTED]> wrote:
> No. You don't need to open ports on your router because all connections are
> outbound from clients to the EchoServer which needs to be on the web
> somewhere. I don't know if you could run EchoServer in a DMZ and still get
> to it from your VncViewer. I do believe you can run the viewer on the
> Echoserver and see clients from there.
> pw
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:
> [EMAIL PROTECTED] On Behalf Of nightduke
> Sent: Friday, May 30, 2008 1:59 PM
> To: Peter White
> Cc: Scott Best; [email protected]
> Subject: Re: [Echovnc-users] echovnc server can't connect
>
> And open port 1328 at my router?
>
> Nightduke
>
>
> 2008/5/30 Peter White <[EMAIL PROTECTED]>:
> > I think you need your EchoServer on the outside of your router. Ours is
> > in a Colo.
> > pw
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > nightduke
> > Sent: Friday, May 30, 2008 1:19 PM
> > To: Steve Sobol
> > Cc: Scott Best; [email protected]
> > Subject: Re: [Echovnc-users] echovnc server can't connect
> >
> > So it can't be fixed.The problem is my router?.
> > Yo was able to connect to my computer but i want other thing, let me
> > explain.
> > I send vncviewer to my customers, then i give them the password but i
> > want to use their computers not my computers.
> > Pardon me for my poor english.
> >
> > Nightduke
> >
> >
> > 2008/4/27 Steve Sobol <[EMAIL PROTECTED]>:
> >> Scott Best wrote:
> >>>
> >>> NIghtduke:
> >>>
> >>> Heya. If you're behind a router, you won't be able to connect
> > to a
> >>> VNC server that's *also* behind that router, using the router's IP
> >>> address.
> >>> That's called (among other things) a "hairpin turn", and most routers
> >>> simply won't support it. If canyouseeme or GoToMyVNC says that your
> >>> VNC server is reachable from the "outside world", then it is .. even
> >>> though
> >>> it may not be from the "inside world".
> >>
> >> That's exactly what was happening. I took the discussion offlist, got
> > on
> >> Google Chat with Nightduke, and found that I could connect to his
> > EchoVNC
> >> server with zero problems from outside.
> >>
> >>
> >> --
> >> Steve Sobol, Victorville, CA PGP:0xE3AE35ED www.SteveSobol.com
> >> Geek-for-hire. Details: http://www.linkedin.com/in/stevesobol
> >>
> >>
> >
> > ------------------------------------------------------------------------
> > -
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > Echovnc-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/echovnc-users
> >
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Echovnc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/echovnc-users
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Echovnc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/echovnc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Echovnc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/echovnc-users
