MILLAUTZ Ren� wrote:
Hi all!Hi Ren�,
I saw that this is a more or less french mailinglist, but I don�t
understand french at all. So I�ll write in english and I hope that this
isn�t a problem. Now to my Problem:
----------------------------------------------------------------
I followed the instructions in the readme-file (which is written in
frensch and I tried to understand as well as possible) and installed the
package under my Linux distro. Afterwards I edited the �adsl�,
�chap-secrets� and �pap-secrets� file and run the startmodem script. So
far so good. Initialising and Firmwareload were done well, but the
modem-setup stoppet at block 166, writing �waiting...�.
So I read the FAQ at the Webpage etc. and decided to do my own
synch.-file, as it�s recomended in the FAQ. I did this whit the usb-sniffer software which is in the tutorial on the
webpage. (btw. I can�t explain, but the log file didn�t stop to grow. It
gotta blew up to about 1 GB , even I removed the filter - after
restarting windows, it stopped?! So it was very difficult to get a file
which is about 10 megs of size. After 3 turns I was early enough with
copiing, that the size was about that 10 megs. � Perhaps it�s crashed?!)
Running the startmodem script again, whith my new synch-file (created
with the script) I got about 20 Blocks further then before, but it still
sucks.
Now I don�t know what to do anymore. I think it�s still the synch file,
which doesn�t fit, but I don�t know how to get or construct a better
one.
So here are the details of my System running: *******************************************************
- kernel version : 2.4.16-4G (updatet from 2.4.4-4GB distro update)
- Linux distribution : SuSe 7.2
- pppd version : 2.4.0
- moutils version : 2.4.5
- USB Controller (HUB) model : 00:01.2 USB Controller: SIS 7001 (rev 07)
, 00:01.3 USB Controller: SIS 7001 (rev 07)
- eciadsl driver version : See Version File (attached)
- windows driver info if you use it : Driver :1.11.0007Q-A (LanUsb) |
Firmware: Q43 | Panel: 3.1.10
- modulation of provider : G.DMT
- the synch .bin : See synch.bin (attached)
- USB/ethernet modem model : Zyxel Prestige 630-41 (Globespan Chipset) - location (country/state/region/town), Austria/-/Syria/Graz
- provider : TU-Graz
- Linux experience level : Newbie
I hope anybody can help me with that problem. I am a real Linux-Newbie
and only worked on Windows yet so please be patiant :o)
Thanx in advise for any of your comments and sorry for writing not in
french :o)
Regards,
Ren�
+++++++++++++++++++++++++++++++++
Millautz Ren�
Student of Telematics at TU-Graz
[EMAIL PROTECTED]
Before making your own .bin file, you can try all the .bin of synch_bin archive :
http://eciadsl.flashtux.org/eciadsl_synch_bin.tar.gz
Unpack this into /etc/eciadsl and run eciconftxt.sh to change your .bin
Between each attempt, unplug/replug your modem.
Keep us informed of the result. If no .bin works, you can come on IRC, we'll help you.
Read you soon,
Cordialement / Best regards
Sebastien.
Web: http://www.flashtux.org - email: [EMAIL PROTECTED]
Jabber: [EMAIL PROTECTED] - AIM: FlashCode AIM - ICQ: 160677660
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org
Archives de cette liste de diffusion: http://liste.eci.free.fr
Pour se desinscrire: mailto:eci-request@;ml.free.fr?subject=unsubscribe
