On 02.03.2012 17:36, Alex Schuilenburg wrote: > Hi Ilija, > > On 2012-02-13 22:02, Ilija Kocho wrote: >> Hi Alex >> >> eCos GNU tools 4.6.2-20120125 (arm_eabi) binaries are ready for testing. >> John has placed them on FTP and by now most of the mirrors should have >> updated. >> >> I guess this one is closest to you: >> http://www.mirrorservice.org/sites/sourceware.org/pub/ecos/gnutools/i386linux/test/ecos-gnutools-arm-eabi-20120125.i386linux.tar.bz2 >> >> And here are the patches: >> http://www.mirrorservice.org/sites/sourceware.org/pub/ecos/gnutools/src/test/ecos-gnutools-20120125-patches.tar.bz2 > Thanks. I have taken a test snapshot of anoncvs on 2012-03-01 > 00:00:00:00 along with the toolchain above and thrown that to our test > farm. Unfortunately the Embedded Artists LPC2468-32 anoncvs port > appears to be either incompatible with our RedBoot or is broken in > anoncvs. All the tests fail to hit a breakpoint set at cyg_test_init, > or run without any breakpoints. I suspect this port appears to have > suffered bitrot since the V3 as the board appears to have been run in > our testfarm for the public eCos 3.0 release in 2009, and the RedBoot on > the board is dated Apr 25 2008 which goes back to V2. > > I have just switched to using our eCosPro sources and the first couple > of tests I checked passed, so at least this confirms this is not any > issue with the toolchain. Using the same set of eCosPro sources with our > ecospro tools and the anoncvs tools at least will tell us if there is > any regression. Unfortunately though, if there is a regression we will > only be able to report the test/s that failed along with the flags and > configuration used to build the tests. Otherwise somebody is going to > need to fix the anoncvs port for the Embedded Artists LPC2468-32 board.
Thank you Alex. I think that the first step is to find out whether it is a problem with EA LPC2468-32 code or more general. Unfortunately I am not able to test with this board as we don't have one. I hope that the testing with STM32 may give us some hint. I also wander if test with RedBoot from current CVS would help. Regards Ilija >> The specific feature of public eCos is that it uses uSTL rather than >> stdlibc++. Would it be possible for you to add ustl with fileio tests? >> Should I be of any help please contact me. > I have added the configuration you sent to our test farm, although > obviously because the sources are eCosPro, there is no uSTL support > testing for the Embedded Artists LPC2468-32. > > I'll let you know how we get on with the ST STM3210E-EVAL board testing. > > Cheers > -- Alex > Managing Director/CEO eCosCentric Limited > www.ecoscentric.com Reg in England and Wales, Reg No 4422071 > >
