im using a Windows based environment with a Pentium CPU as both Host and Target. Im trying to download the '.exe' file through the network hub but i havent been succesful with that
Can anyone help me out with the exact command sequence using 'load' command in RedBoot my HOST ip-address is 192.168.0.10 and my TARGET ip-address is 192.168.0.10 1- load -r -v -h 192.168.0.10 -m HTTP -c 1 -b 0x000a0000 hello.exe 2- load -r -v -h 192.168.0.10 -m HTTP -c 1 -b 0x000a0000 hello.exe On Boot Up RedBoot gives the following command on my Hyper Terminal console/display ---------------------------------------------------- Ethernet eth0: MAC address 00:50:8b:0f:e8:34 IP: 192.168.0.10/255.255.255.0, Gateway: 0.0.0.0 Default server: 0.0.0.0, DNS server IP: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [FLOPPY] Non-certified release, version UNKNOWN - built 23:49:26, May 28 2006 Platform: PC (I386) eCos based Embedded System. RAM: 0x00000000-0x000a0000, 0x0008ac10-0x000a0000 available RedBoot> ---------------------------------------------------- Can anyone help me out with the load command sequence using network load in RedBoot __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
