Greetings,
I am using Intel' Xscale PXA270 processor and my SDRAM
(32-bit,104 MHz) 64MB is interfaced to BANK0 having
the physical address 0xA0000000.
In the hal_mmu_init function, the SDRAM is mapped to
virtual address 0x000 using the X_ARM_MMU_SECTION
macro as CACHED. It works fine.
But if I change the virtual address to 0x800 or any
other address other than the 0x000 the redboot does
not boots and halts at early stage after the LED 7
instruction.
Is it that the SDRAM cannot be mapped to any other
address except 0x00000000 in Redboot?
I require the SDRAM to be mapped to 0x80000000, since
I want to boot wince image.
Regards,
Tejas Pawaskar
Send a FREE SMS to your friend's mobile from Yahoo! Messenger. Get it now
at http://in.messenger.yahoo.com/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
