Bhanu Prakash Adhikari wrote:
Setup -GW2348 Avila board - 64 MB JTAG Parallel Port MS-DOS flash.exe version 1.1 RedBoot 2.02 (from GW) I tried to load custom built RedBoot 2.02 for 64MB Avila (GW2348) board using JTAG (from GW). I'm using MS-DOS to burn the inbuilt flash. "flash.exe redboot-64.bin pv" gives no error. (My flash.exe version doesn't support "o" option) After programming and verifying is done, I powered-off the board and unplugged JTAG and powered-on. To my surprise I see no input on Hyperterminal. Am I missing something crucial? Can some one help me with workable redboot sample image, so that I can understand better on JTAG usage?
I'd suggest that you contact GW (whomever that is) as this is not a general eCos or RedBoot question, but very specific to their products. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
