On Fri, Jun 01, 2007 at 11:35:39PM +0700, Alexey Shusharin wrote: > It's strange, that your board works via serial. Maybe in your > configuration interrupt driven serial driver is enabled. It overwrites > variant implementation. In that case, my board works too. But, it > doesn't matter now.
At least one time in a week I rsync the eCos anonymous cvs tree with my worked copy of the ECOS_REPOSITORY. I've done that today too. I'd done no changes in Olimex plf HAL since 2007/01/31. So, I would want be sure that your RedBoot, eCos test and your eCos repository is a freshmeat. AFAIK, default ecos.ecc (configuration) uses ROM monitor (ROM calling interface). Therefore, any out dated RedBoot stuff can be a reason of the difference. So, 1) do cvs checkout; 2) download the latest epk, add it to ecos db (ecosadmin.tcl), apply that CS8900A patch; 3) rebuild/upgrade RedBoot; 4) build the 'examples/twothreads'. Note: Be sure that you didn't mess any sources in $ECOS_REPOSITORY before. As I did note, it's better to rsync cvs tree with your worked tree. Only in such a case, it will be possible to compare our lab's results. A moment ago, I did repeat that lab with 1 only difference. I began do that with line a 'ecosconfig new olpce2294' instead of that 'ecosconfig new olpch2294' :-) The results are same (as I got for LPC-H2294). The 'twothreads' worked as expected. I even didn't connect RJ-45 for the lab :-) Kind regards, -- Sergei -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
