On Sat, Jun 02, 2007 at 04:30:00AM +0530, Alok Singh wrote:
>
> Hi,
> I'm seeing a strange problem on my Box.? I'm using Free BSD stack. The issue
> is that when I send icmp requests from a single client to the box, the stack
> doesn't respond in time.? But when I start sending icmp requests from another
> client, the stack starts sending 100% ICMP echo replies.? I'm currently
> debugging the system. I've seen that if I send echo requests very slowly,
> then invariably client times out. When I send icmp request from another
> client, it sorts of kick something in the stack, and the echo reply to the
> previous request packet also comes out. ??
>
> I'm debugging the system. But if you have some suggestions for me, let me
> know.
Check your interrupts are working correctly. It sounds like you are
loosing interrupts, probably TX complete, so the next packet is not
getting sent until the next RX happens.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
