Sorry I missed the link with supported hw. Here it is: http://ecos.sourceware.org/hardware.html
Ilija Koco wrote: > eCos is ported to some automotive platforms such as Freescale's MPC500 > and MAC7100. > Here you will find info of some supported hardware. > > Best regards > Ilija > > Klaus Nji wrote: > >> Any additional piece of information will be of help. >> >> I am currently looking for an Evaluation board for an automotive application. >> >> I have looked at the list currently listed on eCosCentric but could use some >> additional advice or recommendations based on recent experiences. I want to >> minimize running into technical difficulties arising from incompatibility >> issues given my limited resources. >> >> As of now, hardware requirements are: >> >> • 32 or 64 bit CPU (CPU speed not crucial as time fastest dynamic is 1s). >> • Low Power Consumption or Sleep Mode capability >> • Expandable Flash Memory for field upgrade of firmware >> • 3x RS-232 >> • CAN interface >> • 1 Audio/Video >> • 1 USB 2.0 port (not mandatory) >> • Couple of analog and digital I/O >> • eCos recently ported onto board with minimal technical difficulties. >> >> Again, any advice from recent experiences will be greatly appreciated. >> >> Thanks in advance, >> >> >> Klaus >> >> >> > > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
