> > With only 64Kbytes of RAM, you will be very limited to what you can > do. I strongly suggest you get a JTAG debugger which can set hardware > breakpoints. You can then run your application from ROM and single > step, set a couple of breakpoints etc. > I know, but for first test 64k are quite fine. And for my first tests I like to be as none invasive as possible. The board is the mindstorms NXT board and to have JTAG debugging I would need to disassamble the brick and solder a connector in. However I can image that I will not come far without debugging support.
> > How are you going to get this image into RAM? I thought of useing sam-ba for loading and starting images. > > You also need to make sure that RAM is mapped to address 0x0 as well > as 0x00200000. I know ROM startup does this, but i think RAM startup > probably does not. Is this necessary for the vectors to be at the right place? -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
