If you use the latest sources from CVS, you should enable the CYGOPT_NET_FREEBSD_STACK_ACCEPT_UNICAST option to define BOOTP_COMPAT. This will permit BOOTP to work. This assumes that you are using the Free BSD network stack.
Jay -----Original Message----- From: Alexey Shusharin [mailto:[EMAIL PROTECTED] Sent: Friday, February 08, 2008 2:30 AM To: [email protected] Subject: [ECOS] BOOTP problem Hello, I'm trying to use BOOTP to gather configuration from server. RedBoot BOOTP support works fine, but eCos application doesn't receive BOOTREPLY message, although server sends it. If i edit bootp_support.c and add broadcast flag to BOOTREQUEST (and so server sends BOOTREPLY as broadcast) client receives information. But as i understand it's not best decision. DHCP works fine with RedBoot and eCos application. There is the problem? Does anybody use BOOTP (not DHCP) in eCos application? I use lpc2xxx hal, Cirrus Logic CS8900A ethernet controller and freebsd stack ecos port. Thanks Best regards Alexey Shusharin -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
