On Mon, 09 Jun 2008 15:16:46 +0200, Andrew Lunn <[EMAIL PROTECTED]> wrote:
On Mon, Jun 09, 2008 at 03:02:03PM +0200, Robert Brusa wrote:
Hi
I downloaded ecos from the anonymous CVS to /opt/ecos/ecos-2.x (on a
debian etch PC)
Version 2.0 is very old. I would suggest downloading the anonymous CVS
sources.
However this will not fix your TCL problem. See the mail archive, it
has been discussed a few times.
Andrew
Yes, 2.0 is old. What I am using is the most recent version from anoymous
CVS, obtained by using the command:
cvs -z3 -d :pserver:[EMAIL PROTECTED]:/cvs/ecos co -P ecos
I assumed that this is the most recent version, but because I do not know
which one it is, I nicknamed it version 2.x.
With respect to the TCL problem: In the meantime, I configured a eCOS
(default)system to start with. Are the updated tools really mandatory or
can one simply use the old ones without (later) problems? I will also
check the archives (I have already done so, but found nothing so far. I
give it another try)
Thanks and regards Robert
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
