On Mon, 23 Jun 2008 17:10:56 +0200, Robert Brusa <[EMAIL PROTECTED]>
wrote:
Hi
I have a pretty basic problem: The example serial uses the function
err = cyg_io_lookup( "/dev/haldiag", &handle ).
The program works, but now I want to change it for output on UART 0 of
my AT91SAM7X-EK. I have tried everything - such as console, tty0 tty1
and other instead of haldiag. It does not work, it always return -2 as a
result, telling me it can not find the driver. What is the correct name
to use?
Thanks and regards Robert
Meanwhile I went back to the configtool to check if all these drivers are
indeed in my current configuration. And now I found these mystical
strings: /dev/ser0, /dev/ser1 and /dev/ttydiag. Hence problem solved.
Thanks and have a nice evening.
Robert
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
