On Sat, 04 Oct 2008 21:57:46 +0200, Gábor Török <[EMAIL PROTECTED]> wrote:
I have started to write a driver for the ADC of the Atmel AT91 series
controllers. I will test it on an AT91SAM7SE controller. When it is
ready, I will send the patch so that it can be included in eCos.
Is anybody interested or is there anybody who works on the same thing?
Gábor
---------- Extract from a previous related thread ----------
From: Gábor Török
Date: Wed, Sep 17, 2008 at 8:54 PM
Subject: Re: [ECOS] AT91SAM7S platform, io_plf.h
To: [email protected]
It seems that the ADC is generic to AT91SAM devices (I checked SAM7S,
SAM7A3, SAM7L and SAM9260), they differ only in supported values for
trigger sources, channel number, etc. I think I will write a driver
that can be used with the Generic ADC driver layer.
On Wed, Sep 17, 2008 at 7:26 PM, Andrew Lunn wrote:
When adding the ADC defines you first need to determine what level
they go. Is the ADC controller specific to AT91SAM7 or is it generic
to all/many of the AT91 devices? It does look like many different
AT91SAM devices have ADC controllers. I took a quick look at the
AT91SAM9XE128 and it seems to have the same ADC controller. Maybe also
the AT91SAM7L devices use the same controller?
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
Hi
I am working with an AT91SAM7x-based board. My application will use the
ADC. Currently I am still busy with other "fundamentals", but in the next
days I will takle this ADC-issue. So I am rather interested to hear about
your progress - and hopefully soon be able to contribute something as well.
Robert
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
