[Forwarded from the YAFFS mailing list also to the eCos list]
Currently eCos has no real support for NAND flash. However, at this very moment I am working on that -- it is the main part of my job right now. Status: my pilot eCos NAND flash layer is working right now on my BlackFin, including Bad Block Table, ECC, etc. But before I publish, I need lots more stress testing.
I am also going to run YAFFS2 on this eCos NAND Flash layer. I just started making an eCos wrapper for it.
If you would like to join me in stress testing, well, I welcome that. Rutger Hofman VU Amsterdam Deroo Stijn wrote:
Hi, Does someone have some documentation on how to integrate yaffs2 into the eCOS operating system? On the yaffs internet page, I found some documentation about yaffs1, but there isn't any doc describing yaffs2. Kind regards, Stijn Deroo --- Stijn Deroo R&D Engineer Televic Transport Systems http://www.televic.com Televic NV / SA (main office) Leo Bekaertlaan 1 B-8870 Izegem Tel: +32 (0)51 303045 Fax: +32 (0)51 310670 _______________________________________________ yaffs mailing list [EMAIL PROTECTED] http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
