Dear Uwe, Thanks for the information. I will check the documentation of the 22xx and 24xx to see what are the differences. The board I use is only a header board, I'll have to add the mainboard before I can test it. I'll let you know as soon it works.
I'll be using a CAN network for various control functions. I assume from the fact that you writtenthe CAN driver, that you have experience in using it as well. Can you recommend me a suitable high level API for home control? (no fees etc.) I am planning to use PIC CAN IO expanders in the network which will be pre-configured. I have included your CAN driver in my eCOS project, but did not have a chance to make it work (lack of board and peripherals). Thanks for your help. Regards, Peter ----- Original Message ---- From: Uwe Kindler <[email protected]> To: [email protected] Cc: [email protected] Sent: Tuesday, December 23, 2008 11:07:50 PM Subject: [ECOS] Re: Modifications to to ADC LPC24xx Hello Peter, I've created the LPC24xx ADC driver. There are some differences between the older LPC2xxx ADC layout and between the newer LPC24xx and LPC23xx ADC peripheral. You should check if this driver is applicable for LPC2xxx variants with minor modifications. If the driver works also for LPC2xxx variants then you can provide a patch that converts the LPC24xx ADC driver into a generic LPC2xxx ADC driver. I've also created the LPC2xxx CAN driver an also used this driver with the Olimex LPC2294 header board. So if you have further questions regarding the CAN drive you can contact me. Regards, Uwe -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
