On 12/24/2009 08:57 PM, Sreeni Guduguntla wrote:
Hi,
I am trying to load linux from CF on gateworks cambria board. I get the
following error. Any insight?
CF is formatted properly with ext2 file system in the concerned partition. I
was able to mount CF on regular PC and was able to see linux file.
--Sreeni
RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 2.04.13 - built 18:57:33, Oct 24 2008
RedBoot> disks
hda1 Linux
hda2 Linux
RedBoot> load -r -v -b 0x800000 -m disk hda1:/linux
e2fs_open: e2fs_inode_lookup failed
Can't load 'hda1:/linux': Can't open file
RedBoot> load -r -v -b 0x800000 -m disk hda1:linux
e2fs_open: e2fs_inode_lookup failed
Can't load 'hda1:linux': Can't open file
RedBoot> load -r -v -b 0x800000 -m disk "hda1:/linux"
e2fs_open: e2fs_inode_lookup failed
Can't load 'hda1:/linux': Can't open file
RedBoot> load -r -v -b 0x800000 -m disk "hda1:linux"
e2fs_open: e2fs_inode_lookup failed
Can't load 'hda1:linux': Can't open file
What version of EXT2 file system did you use? The RedBoot EXT2
driver is rather old and can only handle versions with i-nodes
that are 128 bytes each (newer versions of EXT2 can use 256 byte
i-nodes).
Try formatting your CF card with the "-I 128" option.
n.b. the first command you tried is the correct syntax - no quotes
should be required.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
