Thank you Mr.Sergei and All. LPC2468 OEM Board /embeddedartists is used.
>It sounds good. If you cannot use GDB to dig an issue I would try to >Build RedBoot with iopeek, iopoke commands and using them just try to >read FLASH ID codes, look here, please (find your part's code) The above-mentioned operated by redboot(without FLASH support) that operated normally. ID of Flash-Rom was able to be read without hanging up by using iopeek and iopoke. However, $ ecosconfig --srcdir=${ECOS_REPOSITORY} Add flash hangs up. If Flash-Rom cannot be recognized, cannot Ecos be loaded? >And the last tip. The eCos' (PD) ChangeLog has record: >2008-07-08 Uwe Kindler <uwe_kind...@web.de> >* NEWS: >* ecos.db: Add EA LPC2468 OEM board, target, flash driver, >LPC24XXX variant + serial driver >So, seek the ecos-patches, ecos-discuss lists around this date point >and may be you get more info about used port. >Sergei I confirmed the above-mentioned file. Because the time stamp is 2009-3-27, I think it is the latest. The way that applies patches when there is doing patches again is not understood. I'm sorry English ..poor... Please continue your favors toward continuation. I am sorry my best regards in a rudimentary question because it is a beginner. -------------------------------------------- Shu Higashiyama jyu-sha Corp. 2-20-19-609,Teraya,Tsurumi-ku,Yokohama-city,Japan Tel 81-45-576-0976 Fax 81-45-576-0976 E-Mail aeb05...@nifty.com higa...@jiyu-sha.co.jp URL http://homepage1.nifty.com/jiyu-sha/ http://www.jiyu-sha.co.jp --------------------------------------------- -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss