> >> > > >> > I built the image and I tested it on the same board with a > >> different bootloader (eBoot). > >> > Now I need to run it with the RedBoot bootloader. > >> > > >> You startup assembler file probably expects to be running > in Physical > >> memory. I think iMX25 has SDRAM at 0x80000000 but you have > to verify > >> that. Also verify that the SDRAM is mapped to 0x80000000 in your > >> Redboot port. If the above is true and 0x180000 is the > entry point, > >> try to start it like this. > >> > >> lo -r -b 0x180000 nk.nb0 > >> go 0x80180000 > >> > > > > I guess the SDRAM is mapped @ 0x0. This is the output of > the RedBoot: > > > Yes it is - but what I meant to say is that SDRAM should be > mapped to 0 AND also to 0x80000000 for the above two > commands to work. If this does not work it is time to debug > the windows code.
Which Platform Builder options should I use to compile the OS image? Now i have no options but defined the variable imgnand=1 (that i guess only eBoot uses..) The same image works on a platform with eBoot. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss