Hi, How do you load the application in RAM? Are you building a ROMRAM type of application that relocates to RAM which you plan to debug using the GDB stubs? Can you dump the memory content at address 0x100000 and forward, is the memory initialized?
Christophe -----Original Message----- From: ecos-discuss-ow...@ecos.sourceware.org [mailto:ecos-discuss-ow...@ecos.sourceware.org] On Behalf Of Chris Cuthbert Sent: 8. mars 2011 02:33 To: ecos-discuss Subject: [ECOS] GDB Issue on MPC837X Hello, I am trying to get gdb working on a MPC847X ERDB eval board using the serial port. Basically, I cannot get gdb to start executing the application loaded in RAM at 0x100000. Logs below. Any help appreciated. Thanx. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.03.07 15:42:06 =~=~=~=~=~=~=~=~=~=~=~= (gdb) set debug serial 10 (gdb) set debug remote 1 (gdb) tar rem /dev/ttySI166 Remote debugging using /dev/ttySI166 Sending packet: $Hc-1#09...[ r +]Ack [$][O][K][#][9][a]Packet received: OK Sending packet: $qC#b4...[+]Ack [$][E][0][2][#][a][7]Packet received: E02 Sending packet: $qOffsets#4b...[+]Ack [$][#][0][0]Packet received: Sending packet: $?#3f...[+]Ack [$][S][0][4][#][b][7]Packet received: S04 Sending packet: $Hg0#df...[+]Ack [$][O][K][#][9][a]Packet received: OK Sending packet: $g#67...[+]Ack [$][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][0][#][8][0]Packet received: 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 0x0 in __lshrdi3 (u=0, b=0) (gdb) (gdb) jump *0x100000 Line 16 is not in `__lshrdi3'. Jump anyway? (y or n) y Continuing at 0x100000. Sending packet: $P40=00100000#72...[+]Ack [$][O][K][#][9][a]Packet received: OK Sending packet: $Hc0#db...[+]Ack [$][O][K][#][9][a]Packet received: OK Sending packet: $c#63...[+]Ack [$][T][0][4][4][0][:][0][0][1][0][0][0][0][0][;][0][1][:][0][0][0][0][0][0][0][0][;][#][6][8]Packet received: T0440:00100000;01:00000000; Program received signal SIGILL, Illegal instruction. 0x100000 in _stext () at include/exception:16 16 virtual ~exception () { } Current language: auto; currently c++ (gdb) -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
