Hi, I have a TWR-K60N512 too! Is it possible to apply patchs to Mercurial version? (CVS is blocked and I ask my admin to free it) Actually, I clone the repository using informations from http://www.ecoscentric.com/devzone/snapshots.shtml and actual changeset is 3029:9aec6a8ff9b9. Regards.
---------------------------------------- > Date: Wed, 13 Apr 2011 17:54:49 +0200 > From: ili...@siva.com.mk > To: ecos-discuss@ecos.sourceware.org > Subject: Re: [ECOS] Kinetis TWR-K60N512-KIT questions > > On 13.04.2011 10:01, jjp jjp wrote: > > Hi, > > I modify the code according to > > http://sourceware.org/bugzilla/attachment.cgi?id=5340&action=diff > > which is same bug you are talking about. > > It is the same bug, but the patch is obsoleted by a new one. Pse revisit > the bug. > > > I will begin to test your HAL as soon as possible (maybe tomorrow). > Can you tell me what platform HW do you test on? > Especially what is your clock source (unless it is TWR-K60N512)? > > > Regards. > > Note : I'm using cortex-m3 support on Zylin zy1000. > > > > ---------------------------------------- > >> Date: Tue, 12 Apr 2011 20:08:56 +0200 > >> From: ili...@siva.com.mk > >> To: ecos-discuss@ecos.sourceware.org > >> Subject: Re: [ECOS] Kinetis TWR-K60N512-KIT questions > >> > >> Hi again > >> > >> In meantime I have built gnutools arround GCC 4.6.0: > >> gcc-4.6.0 > >> newlib-1.19.0 > >> binutils-2.21.51 (+ OS patch, see note below) > >> gdb-7.2 > >> > >> First tests are encouraging, I was able to get "Hello world" with both > >> HAL and devs serial driver. > >> > >> Note regarding binutils-2.21.51: > >> > >>> -. binutils-2.21.51 (patched snaphot with OS > >>> support for cortex-m4) > >> > >> I don't quite figure out whether you mean that you downloaded > >> binutils-2.21.51 already patched or you have applied the patch. I > >> downloaded binutils-2.21.51 today and it is didn't have the OS patch, > >> (Btw it seem to have been committed yesterday): > >> http://sourceware.org/bugzilla/show_bug.cgi?id=12296 > >> > >> However gcc-4.6.0 works for Cortex-M4, or at least for Kinetis - with > >> both -mcpu=cortex-m4 and -mcpu=cortex-m3. > >> > >> I am looking forward to your tests. > >> > >> Regards > >> Ilija > >> > >> > >> On 11.04.2011 09:42, jjp jjp wrote: > >>> Hi Ilija, > >>> I can't test it before wednesday. > >>> I will give you feedbacks as soon as possible. > >>> Regards. > >>> > >>> > >>> Date: Fri, 8 Apr 2011 22:09:05 +0200 > >>> From: ili...@siva.com.mk > >>> To: ecos-discuss@ecos.sourceware.org > >>> CC: jackoa...@hotmail.com > >>> Subject: Re: [ECOS] Kinetis TWR-K60N512-KIT questions > >>> > >>> Hi jjp > >>> > >>> > >>> > >>> Thank for question, you are coming in right time, A week ago I > >>> placed Kinetis port on Bugzilla. > >>> > >>> http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001187 > >>> > >>> I'll appreciate if you try it and come with feedback. > >>> > >>> Note:You need to commit latest version from CVS as it has bugs > >>> 1001184, 1001186 integrated. > >>> > >>> > >>> > >>> I am using official eCos 3.0 tools (-m3 of course) in order to > >>> maintain compatibility, but I am keen to try gcc 4.6. > >>> > >>> > >>> > >>> Regards > >>> > >>> Ilija > >>> > >>> > >>> > >>> On 08.04.2011 16:42, jjp jjp wrote: > >>> > >>> Hi list, > >>> > >>> I am doing some tiny tests with k60 and I have some troubles to > >>> make SVC call running properly. > >>> > >>> Vector table is set at 0x20000000 in register SCB_VTOR, psp and > >>> msp have different adresses in RAM. > >>> > >>> I always get an HardFault after __asm__("svc 0"); > >>> > >>> > >>> Check if VTOR setting is as desired, 0x20000000 should work. Also > >>> stack, what do you have in mlt files? > >>> > >>> Ilija, is it working properly for you? > >>> > >>> I'm using : > >>> > >>> -. gcc-4.6.0 > >>> > >>> > >>> -. binutils-2.21.51 (patched snaphot with OS > >>> support for cortex-m4) > >>> > >>> -. zylin zy1000 (revB 1.66) > >>> > >>> > >>> Nice to see that Zylin supports Kinetis too. > >>> > >>> Regards > >>> > >>> > >>> > >>>> Date: Thu, 27 Jan 2011 23:01:15 +0100 > >>>> From: ili...@siva.com.mk > >>>> To: ecos-discuss@ecos.sourceware.org > >>>> Subject: Re: [ECOS] Kinetis TWR-K60N512-KIT questions > >>>> On 27.01.2011 10:09, jjp jjp wrote: > >>>>> Hi, > >>>>> I follow very closely the port of Ilija Kocho on Kinetis > >>> TWR-K60N512-KIT and > >>> > >>>>> I have some questions about your development methods : > >>>> Hello, and thanks for your interest. > >>>>> What cross compiler tools are you using (arm-eabi-gcc > >>> v-4.3 with patchs for cortex-m4)? > >>> > >>>>> What kind of debugging tools are you using? > >>>> Cortex-M4 is binary and backward compatible with M3 so, for > >>> the time > >>> > >>>> being you can use current compiler, of course you can't use > >>> Cortex-M4 > >>> > >>>> specific features. Or you can try forthcoming 4.6. > >>>>> I don't see debug tools (except libSWD with OpenOCD) in > >>> Free and Open Source Software community trying > >>> > >>>>> to get debug by Serial Wire Debug. > >>>> Kinetis is very new, not yet in regular production so many > >>> tools are not > >>> > >>>> yet prepared. I don't know if OpenOCD supports Kinetis. In > >>> our lab we > >>> > >>>> have Ronetix PEEDI that is just getting Kinetis support. In > >>> meantime we > >>> > >>>> are working "dry" :( > >>>> Regards > >>>> Ilija > >>>> -- > >>>> Before posting, please read the FAQ: > >>> http://ecos.sourceware.org/fom/ecos > >>> > >>>> and search the list archive: > >>> http://ecos.sourceware.org/ml/ecos-discuss > >>> > >>> > >>> > >>> > >>> > >> > >> -- > >> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > >> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > >> > > > > > > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss