Hi Since you are new to eCos, I would suggest downloading the latest snapshot build of the eCos Configuration Tool for Linux hosts. Ref:
http://ecos.sourceware.org/ml/ecos-discuss/2011-02/msg00031.html You might also download the arm-eabi test release toolchain. Ref: https://www.sourceware.org/ml/ecos-discuss/2012-06/msg00047.html In the eCos Configuration Tool, set the eCos repository location (Build >> Repository) as follows: /home/kalbar/CVS_repo/ecos_host (this is the folder containing the "packages" folder) You should then see the eCos configuration tree. Select the STM32F4-Discovery hardware template (Build >> Templates). Select the location of your arm-eabi toolchain "bin" folder containing arm-eabi-gcc (Tools >> Paths >> Build Tools). You should then be able to build eCos. I hope this helps... John Dallaway eCos maintainer http://www.dallaway.org.uk/john -------- Original Message -------- Subject: Building eCos. Date: Wed, 02 Apr 2014 21:52:32 +0200 From: kalibar6 <[email protected]> To: [email protected] Newsgroups: gmane.os.ecos.general Hi all, I am trying to play a bit with eCos on STM32F4 Discovery board. I am working under Ubuntu 12.04 (32bit). I know that in downloaded binaries there is no support for this platform. I have to download source files from CVS repository and compile them myself. OK. I have downloaded them: cvs -z3 -d :pserver:[email protected]:/cvs/ecos co -P ecos cvs -z3 -d :pserver:[email protected]:/cvs/ecos co -P host System variable $ECOS_REPOSITORY has been set up to my downloaded files: /home/kalbar/CVS_repo/ecos_host/packages Now after multiple approaches I can't get this thing fully compiled and installed. In main source folder I have created folder 'build' and run configure script and make and install: /home/kalbar/CVS_repo/ecos_host/configure --prefix=/home/kalbar/CVS_repo/ecos_host/build --with-tcl=/usr/lib/tcl8.4 --with-tk=/usr/lib/tk8.4 make sudo make install Some files are getting compiled/build but not all of them. There is still lack of GUI for eCos configuration and package for for my board does not seem to build. I would really appreciate some help on this matter as I have spend quite a lot of time on this and got stuck in dead end with no help from README files nor google. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
