> Von: [email protected] [mailto:ecos-discuss- > [email protected]] Im Auftrag von Jerzy Dyrda > Gesendet: Freitag, 13. Juni 2014 17:15 > An: eCos Discussion > Betreff: [ECOS] Fwd: New features required on Cortex-M platform > > Hello all, > > During developing some application on Cortex-M controller I realized that is > missing some vital components in current version of eCos system (from my > point of view) i.e : > > 1) HTTP server - AHTTPD doesn't support lwIP stack what causes that it's > useless. > I'm planing to modify it thus any kind of advises are welcome. > > 2) Small embedded GUI working directly on display. From my side I propose > uGFX -> http://ugfx.org/ License seems to be compatible and due its nature > porting on new platform shouldn't be complicated even for me :) I'm also > planning to add support and again any kind of comments advices or warnings > are expecting. > > 3) SD bus support. I know that I can use SD card in SPI mode but on some board > like STM32F4DISCOVERY SD card i only available on SD bus. > It's high time to add this miss part of system. > > Best regards, > jerzy >
A few comments and questions from my side: - what is the advantage of uGFX? Are there applications available, which are based on uGFX? What do you think about support for QT ( http://qt-project.org/ )? - SD card interface. Unfortunately this is very processor specific. Each Microcontroller has its own IP for accessing SD card. We have made it e.g. for Xilinx Zynq (http://tiprom.itrgmbh.com/projects/ecos-on-zynq/wiki/ECosOnZynq-Wiki ), but I assume it is not re-usable for other platforms! Best Regards Richard -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
