Hi, we have the problem that NTP is not working when there is no ntp server available at startup.
However this is what I read on the ecos pages (http://ecos.sourceware.org/docs-3.0/ref/net-sntp-operation.html) "If SNTP unicast mode is enabled via the CYGPKG_NET_SNTP_UNICAST option, the SNTP client can additionally be configured with a list of specific NTP servers to query. The general algorithm is as follows: if the system clock has not yet been set via an NTP time update, then the client will send out NTP requests every 30 seconds to all configured NTP servers. Once an NTP time update has been received, the client will send out additional NTP requests every 30 minutes in order to update the system clock. These requests are resent every 30 seconds until a response is received." We use a list of NTP servers, but we don't see the 30s repeat when a server does not answer. Should this work? Thanks for any answer, Jürgen -- Jürgen Lambrecht R&D Associate Mobile: +32 499 644 531 Tel: +32 (0)51 303045 Fax: +32 (0)51 310670 http://www.televic-rail.com Televic Rail NV - Leo Bekaertlaan 1 - 8870 Izegem - Belgium Company number 0825.539.581 - RPR Kortrijk -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
