Revision: 17951
http://sourceforge.net/p/edk2/code/17951
Author: lersek
Date: 2015-07-14 12:01:36 +0000 (Tue, 14 Jul 2015)
Log Message:
-----------
OvmfPkg: clone PciHostBridgeDxe from PcAtChipsetPkg
The source code is copied verbatim, with the following two exceptions:
- the UNI files are dropped, together with the corresponding UNI
references in the INF file,
- the INF file receives a new FILE_GUID.
The OVMF DSC and FDF files are at once flipped to the cloned driver.
Cc: Jordan Justen <[email protected]>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <[email protected]>
Regression-tested-by: Gabriel Somlo <[email protected]>
Reviewed-by: Jordan Justen <[email protected]>
Modified Paths:
--------------
trunk/edk2/OvmfPkg/OvmfPkgIa32.dsc
trunk/edk2/OvmfPkg/OvmfPkgIa32.fdf
trunk/edk2/OvmfPkg/OvmfPkgIa32X64.dsc
trunk/edk2/OvmfPkg/OvmfPkgIa32X64.fdf
trunk/edk2/OvmfPkg/OvmfPkgX64.dsc
trunk/edk2/OvmfPkg/OvmfPkgX64.fdf
Added Paths:
-----------
trunk/edk2/OvmfPkg/PciHostBridgeDxe/
trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/
trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.S
trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.asm
trunk/edk2/OvmfPkg/PciHostBridgeDxe/IoFifo.h
trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.c
trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.h
trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c
trunk/edk2/OvmfPkg/PciHostBridgeDxe/X64/
trunk/edk2/OvmfPkg/PciHostBridgeDxe/X64/IoFifo.S
trunk/edk2/OvmfPkg/PciHostBridgeDxe/X64/IoFifo.asm
Modified: trunk/edk2/OvmfPkg/OvmfPkgIa32.dsc
===================================================================
--- trunk/edk2/OvmfPkg/OvmfPkgIa32.dsc 2015-07-14 12:01:30 UTC (rev 17950)
+++ trunk/edk2/OvmfPkg/OvmfPkgIa32.dsc 2015-07-14 12:01:36 UTC (rev 17951)
@@ -430,7 +430,7 @@
UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
UefiCpuPkg/CpuDxe/CpuDxe.inf
PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
- PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
+ OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf {
<LibraryClasses>
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
Modified: trunk/edk2/OvmfPkg/OvmfPkgIa32.fdf
===================================================================
--- trunk/edk2/OvmfPkg/OvmfPkgIa32.fdf 2015-07-14 12:01:30 UTC (rev 17950)
+++ trunk/edk2/OvmfPkg/OvmfPkgIa32.fdf 2015-07-14 12:01:36 UTC (rev 17951)
@@ -214,7 +214,7 @@
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
-INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
+INF OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
Modified: trunk/edk2/OvmfPkg/OvmfPkgIa32X64.dsc
===================================================================
--- trunk/edk2/OvmfPkg/OvmfPkgIa32X64.dsc 2015-07-14 12:01:30 UTC (rev
17950)
+++ trunk/edk2/OvmfPkg/OvmfPkgIa32X64.dsc 2015-07-14 12:01:36 UTC (rev
17951)
@@ -437,7 +437,7 @@
UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
UefiCpuPkg/CpuDxe/CpuDxe.inf
PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
- PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
+ OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf {
<LibraryClasses>
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
Modified: trunk/edk2/OvmfPkg/OvmfPkgIa32X64.fdf
===================================================================
--- trunk/edk2/OvmfPkg/OvmfPkgIa32X64.fdf 2015-07-14 12:01:30 UTC (rev
17950)
+++ trunk/edk2/OvmfPkg/OvmfPkgIa32X64.fdf 2015-07-14 12:01:36 UTC (rev
17951)
@@ -214,7 +214,7 @@
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
-INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
+INF OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
Modified: trunk/edk2/OvmfPkg/OvmfPkgX64.dsc
===================================================================
--- trunk/edk2/OvmfPkg/OvmfPkgX64.dsc 2015-07-14 12:01:30 UTC (rev 17950)
+++ trunk/edk2/OvmfPkg/OvmfPkgX64.dsc 2015-07-14 12:01:36 UTC (rev 17951)
@@ -435,7 +435,7 @@
UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
UefiCpuPkg/CpuDxe/CpuDxe.inf
PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
- PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
+ OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf {
<LibraryClasses>
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
Modified: trunk/edk2/OvmfPkg/OvmfPkgX64.fdf
===================================================================
--- trunk/edk2/OvmfPkg/OvmfPkgX64.fdf 2015-07-14 12:01:30 UTC (rev 17950)
+++ trunk/edk2/OvmfPkg/OvmfPkgX64.fdf 2015-07-14 12:01:36 UTC (rev 17951)
@@ -214,7 +214,7 @@
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
-INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
+INF OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
Added: trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.S
===================================================================
--- trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.S
(rev 0)
+++ trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.S 2015-07-14 12:01:36 UTC
(rev 17951)
@@ -0,0 +1,134 @@
+#------------------------------------------------------------------------------
+#
+# Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#------------------------------------------------------------------------------
+
+#------------------------------------------------------------------------------
+# VOID
+# EFIAPI
+# IoReadFifo8 (
+# IN UINTN Port,
+# IN UINTN Count,
+# IN VOID *Buffer
+# );
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(IoReadFifo8)
+ASM_PFX(IoReadFifo8):
+ push %edi
+ cld
+ movw 8(%esp), %dx
+ mov 12(%esp), %ecx
+ mov 16(%esp), %edi
+rep insb
+ pop %edi
+ ret
+
+#------------------------------------------------------------------------------
+# VOID
+# EFIAPI
+# IoReadFifo16 (
+# IN UINTN Port,
+# IN UINTN Count,
+# IN VOID *Buffer
+# );
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(IoReadFifo16)
+ASM_PFX(IoReadFifo16):
+ push %edi
+ cld
+ movw 8(%esp), %dx
+ mov 12(%esp), %ecx
+ mov 16(%esp), %edi
+rep insw
+ pop %edi
+ ret
+
+#------------------------------------------------------------------------------
+# VOID
+# EFIAPI
+# IoReadFifo32 (
+# IN UINTN Port,
+# IN UINTN Count,
+# IN VOID *Buffer
+# );
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(IoReadFifo32)
+ASM_PFX(IoReadFifo32):
+ push %edi
+ cld
+ movw 8(%esp), %dx
+ mov 12(%esp), %ecx
+ mov 16(%esp), %edi
+rep insl
+ pop %edi
+ ret
+
+#------------------------------------------------------------------------------
+# VOID
+# EFIAPI
+# IoWriteFifo8 (
+# IN UINTN Port,
+# IN UINTN Count,
+# IN VOID *Buffer
+# );
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(IoWriteFifo8)
+ASM_PFX(IoWriteFifo8):
+ push %esi
+ cld
+ movw 8(%esp), %dx
+ mov 12(%esp), %ecx
+ mov 16(%esp), %esi
+rep outsb
+ pop %esi
+ ret
+
+#------------------------------------------------------------------------------
+# VOID
+# EFIAPI
+# IoWriteFifo16 (
+# IN UINTN Port,
+# IN UINTN Count,
+# IN VOID *Buffer
+# );
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(IoWriteFifo16)
+ASM_PFX(IoWriteFifo16):
+ push %esi
+ cld
+ movw 8(%esp), %dx
+ mov 12(%esp), %ecx
+ mov 16(%esp), %esi
+rep outsw
+ pop %esi
+ ret
+
+#------------------------------------------------------------------------------
+# VOID
+# EFIAPI
+# IoWriteFifo32 (
+# IN UINTN Port,
+# IN UINTN Count,
+# IN VOID *Buffer
+# );
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(IoWriteFifo32)
+ASM_PFX(IoWriteFifo32):
+ push %esi
+ cld
+ movw 8(%esp), %dx
+ mov 12(%esp), %ecx
+ mov 16(%esp), %esi
+rep outsl
+ pop %esi
+ ret
+
Added: trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.asm
===================================================================
--- trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.asm
(rev 0)
+++ trunk/edk2/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.asm 2015-07-14 12:01:36 UTC
(rev 17951)
@@ -0,0 +1,140 @@
+;------------------------------------------------------------------------------
+;
+; Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
+;
+; This program and the accompanying materials are licensed and made available
+; under the terms and conditions of the BSD License which accompanies this
+; distribution. The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php.
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+;------------------------------------------------------------------------------
+
+ .586P
+ .model flat,C
+ .code
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; IoReadFifo8 (
+; IN UINTN Port,
+; IN UINTN Size,
+; IN VOID *Buffer
+; );
+;------------------------------------------------------------------------------
+IoReadFifo8 PROC
+ push edi
+ cld
+ mov dx, [esp + 8]
+ mov ecx, [esp + 12]
+ mov edi, [esp + 16]
+rep insb
+ pop edi
+ ret
+IoReadFifo8 ENDP
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; IoReadFifo16 (
+; IN UINTN Port,
+; IN UINTN Size,
+; IN VOID *Buffer
+; );
+;------------------------------------------------------------------------------
+IoReadFifo16 PROC
+ push edi
+ cld
+ mov dx, [esp + 8]
+ mov ecx, [esp + 12]
+ mov edi, [esp + 16]
+rep insw
+ pop edi
+ ret
+IoReadFifo16 ENDP
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; IoReadFifo32 (
+; IN UINTN Port,
+; IN UINTN Size,
+; IN VOID *Buffer
+; );
+;------------------------------------------------------------------------------
+IoReadFifo32 PROC
+ push edi
+ cld
+ mov dx, [esp + 8]
+ mov ecx, [esp + 12]
+ mov edi, [esp + 16]
+rep insd
+ pop edi
+ ret
+IoReadFifo32 ENDP
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; IoWriteFifo8 (
+; IN UINTN Port,
+; IN UINTN Size,
+; IN VOID *Buffer
+; );
+;------------------------------------------------------------------------------
+IoWriteFifo8 PROC
+ push esi
+ cld
+ mov dx, [esp + 8]
+ mov ecx, [esp + 12]
+ mov esi, [esp + 16]
+rep outsb
+ pop esi
+ ret
+IoWriteFifo8 ENDP
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; IoWriteFifo16 (
+; IN UINTN Port,
+; IN UINTN Size,
+; IN VOID *Buffer
+; );
+;------------------------------------------------------------------------------
+IoWriteFifo16 PROC
+ push esi
+ cld
+ mov dx, [esp + 8]
+ mov ecx, [esp + 12]
+ mov esi, [esp + 16]
+rep outsw
+ pop esi
+ ret
+IoWriteFifo16 ENDP
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; IoWriteFifo32 (
+; IN UINTN Port,
+; IN UINTN Size,
+; IN VOID *Buffer
+; );
+;------------------------------------------------------------------------------
+IoWriteFifo32 PROC
+ push esi
+ cld
+ mov dx, [esp + 8]
+ mov ecx, [esp + 12]
+ mov esi, [esp + 16]
+rep outsd
+ pop esi
+ ret
+IoWriteFifo32 ENDP
+
+ END
+
Added: trunk/edk2/OvmfPkg/PciHostBridgeDxe/IoFifo.h
===================================================================
--- trunk/edk2/OvmfPkg/PciHostBridgeDxe/IoFifo.h
(rev 0)
+++ trunk/edk2/OvmfPkg/PciHostBridgeDxe/IoFifo.h 2015-07-14 12:01:36 UTC
(rev 17951)
@@ -0,0 +1,176 @@
+/** @file
+ I/O FIFO routines
+
+ Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _IO_FIFO_H_INCLUDED_
+#define _IO_FIFO_H_INCLUDED_
+
+/**
+ Reads an 8-bit I/O port fifo into a block of memory.
+
+ Reads the 8-bit I/O fifo port specified by Port.
+
+ The port is read Count times, and the read data is
+ stored in the provided Buffer.
+
+ This function must guarantee that all I/O read and write operations are
+ serialized.
+
+ If 8-bit I/O port operations are not supported, then ASSERT().
+
+ @param Port The I/O port to read.
+ @param Count The number of times to read I/O port.
+ @param Buffer The buffer to store the read data into.
+
+**/
+VOID
+EFIAPI
+IoReadFifo8 (
+ IN UINTN Port,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Reads a 16-bit I/O port fifo into a block of memory.
+
+ Reads the 16-bit I/O fifo port specified by Port.
+
+ The port is read Count times, and the read data is
+ stored in the provided Buffer.
+
+ This function must guarantee that all I/O read and write operations are
+ serialized.
+
+ If 16-bit I/O port operations are not supported, then ASSERT().
+
+ @param Port The I/O port to read.
+ @param Count The number of times to read I/O port.
+ @param Buffer The buffer to store the read data into.
+
+**/
+VOID
+EFIAPI
+IoReadFifo16 (
+ IN UINTN Port,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Reads a 32-bit I/O port fifo into a block of memory.
+
+ Reads the 32-bit I/O fifo port specified by Port.
+
+ The port is read Count times, and the read data is
+ stored in the provided Buffer.
+
+ This function must guarantee that all I/O read and write operations are
+ serialized.
+
+ If 32-bit I/O port operations are not supported, then ASSERT().
+
+ @param Port The I/O port to read.
+ @param Count The number of times to read I/O port.
+ @param Buffer The buffer to store the read data into.
+
+**/
+VOID
+EFIAPI
+IoReadFifo32 (
+ IN UINTN Port,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Writes a block of memory into an 8-bit I/O port fifo.
+
+ Writes the 8-bit I/O fifo port specified by Port.
+
+ The port is written Count times, and the write data is
+ retrieved from the provided Buffer.
+
+ This function must guarantee that all I/O write and write operations are
+ serialized.
+
+ If 8-bit I/O port operations are not supported, then ASSERT().
+
+ @param Port The I/O port to write.
+ @param Count The number of times to write I/O port.
+ @param Buffer The buffer to store the write data into.
+
+**/
+VOID
+EFIAPI
+IoWriteFifo8 (
+ IN UINTN Port,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Writes a block of memory into a 16-bit I/O port fifo.
+
+ Writes the 16-bit I/O fifo port specified by Port.
+
+ The port is written Count times, and the write data is
+ retrieved from the provided Buffer.
+
+ This function must guarantee that all I/O write and write operations are
+ serialized.
+
+ If 16-bit I/O port operations are not supported, then ASSERT().
+
+ @param Port The I/O port to write.
+ @param Count The number of times to write I/O port.
+ @param Buffer The buffer to store the write data into.
+
+**/
+VOID
+EFIAPI
+IoWriteFifo16 (
+ IN UINTN Port,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Writes a block of memory into a 32-bit I/O port fifo.
+
+ Writes the 32-bit I/O fifo port specified by Port.
+
+ The port is written Count times, and the write data is
+ retrieved from the provided Buffer.
+
+ This function must guarantee that all I/O write and write operations are
+ serialized.
+
+ If 32-bit I/O port operations are not supported, then ASSERT().
+
+ @param Port The I/O port to write.
+ @param Count The number of times to write I/O port.
+ @param Buffer The buffer to store the write data into.
+
+**/
+VOID
+EFIAPI
+IoWriteFifo32 (
+ IN UINTN Port,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+#endif
+
Added: trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.c
===================================================================
--- trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.c
(rev 0)
+++ trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.c 2015-07-14 12:01:36 UTC
(rev 17951)
@@ -0,0 +1,1396 @@
+/** @file
+ Provides the basic interfaces to abstract a PCI Host Bridge Resource
+ Allocation
+
+ Copyright (c) 2008 - 2013, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "PciHostBridge.h"
+
+//
+// Hard code: Root Bridge Number within the host bridge
+// Root Bridge's attribute
+// Root Bridge's device path
+// Root Bridge's resource aperture
+//
+UINTN RootBridgeNumber[1] = { 1 };
+
+UINT64 RootBridgeAttribute[1][1] = {
+ { EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM }
+};
+
+EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath[1][1] = {
+ {
+ {
+ {
+ {
+ ACPI_DEVICE_PATH,
+ ACPI_DP,
+ {
+ (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
+ (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
+ }
+ },
+ EISA_PNP_ID(0x0A03),
+ 0
+ },
+
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ END_DEVICE_PATH_LENGTH,
+ 0
+ }
+ }
+ }
+ }
+};
+
+PCI_ROOT_BRIDGE_RESOURCE_APERTURE mResAperture[1][1] = {
+ {{0, 0xff, 0x80000000, 0xffffffff, 0, 0xffff}}
+};
+
+EFI_HANDLE mDriverImageHandle;
+
+PCI_HOST_BRIDGE_INSTANCE mPciHostBridgeInstanceTemplate = {
+ PCI_HOST_BRIDGE_SIGNATURE, // Signature
+ NULL, // HostBridgeHandle
+ 0, // RootBridgeNumber
+ {NULL, NULL}, // Head
+ FALSE, // ResourceSubiteed
+ TRUE, // CanRestarted
+ {
+ NotifyPhase,
+ GetNextRootBridge,
+ GetAttributes,
+ StartBusEnumeration,
+ SetBusNumbers,
+ SubmitResources,
+ GetProposedResources,
+ PreprocessController
+ }
+};
+
+//
+// Implementation
+//
+
+/**
+ Entry point of this driver
+
+ @param ImageHandle Handle of driver image
+ @param SystemTable Point to EFI_SYSTEM_TABLE
+
+ @retval EFI_OUT_OF_RESOURCES Can not allocate memory resource
+ @retval EFI_DEVICE_ERROR Can not install the protocol instance
+ @retval EFI_SUCCESS Success to initialize the Pci host bridge.
+**/
+EFI_STATUS
+EFIAPI
+InitializePciHostBridge (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ UINTN Loop1;
+ UINTN Loop2;
+ PCI_HOST_BRIDGE_INSTANCE *HostBridge;
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+
+ mDriverImageHandle = ImageHandle;
+
+ //
+ // Create Host Bridge Device Handle
+ //
+ for (Loop1 = 0; Loop1 < HOST_BRIDGE_NUMBER; Loop1++) {
+ HostBridge = AllocateCopyPool (sizeof(PCI_HOST_BRIDGE_INSTANCE),
+ &mPciHostBridgeInstanceTemplate);
+ if (HostBridge == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ HostBridge->RootBridgeNumber = RootBridgeNumber[Loop1];
+ InitializeListHead (&HostBridge->Head);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &HostBridge->HostBridgeHandle,
+ &gEfiPciHostBridgeResourceAllocationProtocolGuid,
+ &HostBridge->ResAlloc,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ FreePool (HostBridge);
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Create Root Bridge Device Handle in this Host Bridge
+ //
+
+ for (Loop2 = 0; Loop2 < HostBridge->RootBridgeNumber; Loop2++) {
+ PrivateData = AllocateZeroPool (sizeof(PCI_ROOT_BRIDGE_INSTANCE));
+ if (PrivateData == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ PrivateData->Signature = PCI_ROOT_BRIDGE_SIGNATURE;
+ PrivateData->DevicePath =
+ (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath[Loop1][Loop2];
+
+ RootBridgeConstructor (
+ &PrivateData->Io,
+ HostBridge->HostBridgeHandle,
+ RootBridgeAttribute[Loop1][Loop2],
+ &mResAperture[Loop1][Loop2]
+ );
+
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &PrivateData->Handle,
+ &gEfiDevicePathProtocolGuid,
+ PrivateData->DevicePath,
+ &gEfiPciRootBridgeIoProtocolGuid,
+ &PrivateData->Io,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ FreePool(PrivateData);
+ return EFI_DEVICE_ERROR;
+ }
+
+ InsertTailList (&HostBridge->Head, &PrivateData->Link);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ These are the notifications from the PCI bus driver that it is about to enter
+ a certain phase of the PCI enumeration process.
+
+ This member function can be used to notify the host bridge driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Eight notification points are
+ defined at this time. See belows:
+
+ EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures
+ and internal data structures. The PCI
+ enumerator should issue this
+ notification before starting a fresh
+ enumeration process. Enumeration
+ cannot be restarted after sending any
+ other notification such as
+ EfiPciHostBridgeBeginBusAllocation.
+
+ EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to
+ begin. No specific action is required
+ here. This notification can be used to
+ perform any chipset-specific
+ programming.
+
+ EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming
+ phase is complete. No specific action
+ is required here. This notification
+ can be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeBeginResourceAllocation
+ The resource allocation phase is about
+ to begin. No specific action is
+ required here. This notification can
+ be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeAllocateResources Allocates resources per previously
+ submitted requests for all the PCI
+ root bridges. These resource settings
+ are returned on the next call to
+ GetProposedResources(). Before calling
+ NotifyPhase() with a Phase of
+ EfiPciHostBridgeAllocateResource, the
+ PCI bus enumerator is responsible for
+ gathering I/O and memory requests for
+ all the PCI root bridges and
+ submitting these requests using
+ SubmitResources(). This function pads
+ the resource amount to suit the root
+ bridge hardware, takes care of
+ dependencies between the PCI root
+ bridges, and calls the Global
+ Coherency Domain (GCD) with the
+ allocation request. In the case of
+ padding, the allocated range could be
+ bigger than what was requested.
+
+ EfiPciHostBridgeSetResources Programs the host bridge hardware to
+ decode previously allocated resources
+ (proposed resources) for all the PCI
+ root bridges. After the hardware is
+ programmed, reassigning resources will
+ not be supported. The bus settings are
+ not affected.
+
+ EfiPciHostBridgeFreeResources Deallocates resources that were
+ previously allocated for all the PCI
+ root bridges and resets the I/O and
+ memory apertures to their initial
+ state. The bus settings are not
+ affected. If the request to allocate
+ resources fails, the PCI enumerator
+ can use this notification to
+ deallocate previous resources, adjust
+ the requests, and retry allocation.
+
+ EfiPciHostBridgeEndResourceAllocation The resource allocation phase is
+ completed. No specific action is
+ required here. This notification can
+ be used to perform any chipsetspecific
+ programming.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] Phase The phase during enumeration
+
+ @retval EFI_NOT_READY This phase cannot be entered at this time. For
+ example, this error is valid for a Phase of
+ EfiPciHostBridgeAllocateResources if
+ SubmitResources() has not been called for one
+ or more PCI root bridges before this call
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ This error is valid for a Phase of
+ EfiPciHostBridgeSetResources.
+
+ @retval EFI_INVALID_PARAMETER Invalid phase parameter
+
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources. This error is valid for a
+ Phase of EfiPciHostBridgeAllocateResources if
+ the previously submitted resource requests
+ cannot be fulfilled or were only partially
+ fulfilled.
+
+ @retval EFI_SUCCESS The notification was accepted without any
+ errors.
+**/
+EFI_STATUS
+EFIAPI
+NotifyPhase(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
+ )
+{
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+ PCI_RESOURCE_TYPE Index;
+ LIST_ENTRY *List;
+ EFI_PHYSICAL_ADDRESS BaseAddress;
+ UINT64 AddrLen;
+ UINTN BitsOfAlignment;
+ EFI_STATUS Status;
+ EFI_STATUS ReturnStatus;
+
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+
+ switch (Phase) {
+
+ case EfiPciHostBridgeBeginEnumeration:
+ if (HostBridgeInstance->CanRestarted) {
+ //
+ // Reset the Each Root Bridge
+ //
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ for (Index = TypeIo; Index < TypeMax; Index++) {
+ RootBridgeInstance->ResAllocNode[Index].Type = Index;
+ RootBridgeInstance->ResAllocNode[Index].Base = 0;
+ RootBridgeInstance->ResAllocNode[Index].Length = 0;
+ RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
+ }
+
+ List = List->ForwardLink;
+ }
+
+ HostBridgeInstance->ResourceSubmited = FALSE;
+ HostBridgeInstance->CanRestarted = TRUE;
+ } else {
+ //
+ // Can not restart
+ //
+ return EFI_NOT_READY;
+ }
+ break;
+
+ case EfiPciHostBridgeEndEnumeration:
+ break;
+
+ case EfiPciHostBridgeBeginBusAllocation:
+ //
+ // No specific action is required here, can perform any chipset specific
+ // programing
+ //
+ HostBridgeInstance->CanRestarted = FALSE;
+ break;
+
+ case EfiPciHostBridgeEndBusAllocation:
+ //
+ // No specific action is required here, can perform any chipset specific
+ // programing
+ //
+ //HostBridgeInstance->CanRestarted = FALSE;
+ break;
+
+ case EfiPciHostBridgeBeginResourceAllocation:
+ //
+ // No specific action is required here, can perform any chipset specific
+ // programing
+ //
+ //HostBridgeInstance->CanRestarted = FALSE;
+ break;
+
+ case EfiPciHostBridgeAllocateResources:
+ ReturnStatus = EFI_SUCCESS;
+ if (HostBridgeInstance->ResourceSubmited) {
+ //
+ // Take care of the resource dependencies between the root bridges
+ //
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ for (Index = TypeIo; Index < TypeBus; Index++) {
+ if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
+
+ AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
+
+ //
+ // Get the number of '1' in Alignment.
+ //
+ BitsOfAlignment =
+ (UINTN)(HighBitSet64 (
+ RootBridgeInstance->ResAllocNode[Index].Alignment
+ ) + 1);
+
+ switch (Index) {
+
+ case TypeIo:
+ //
+ // It is impossible for this chipset to align 0xFFFF for IO16
+ // So clear it
+ //
+ if (BitsOfAlignment >= 16) {
+ BitsOfAlignment = 0;
+ }
+
+ Status = gDS->AllocateIoSpace (
+ EfiGcdAllocateAnySearchBottomUp,
+ EfiGcdIoTypeIo,
+ BitsOfAlignment,
+ AddrLen,
+ &BaseAddress,
+ mDriverImageHandle,
+ NULL
+ );
+
+ if (!EFI_ERROR (Status)) {
+ RootBridgeInstance->ResAllocNode[Index].Base =
+ (UINTN)BaseAddress;
+ RootBridgeInstance->ResAllocNode[Index].Status =
+ ResAllocated;
+ } else {
+ ReturnStatus = Status;
+ if (Status != EFI_OUT_OF_RESOURCES) {
+ RootBridgeInstance->ResAllocNode[Index].Length = 0;
+ }
+ }
+
+ break;
+
+
+ case TypeMem32:
+ //
+ // It is impossible for this chipset to align 0xFFFFFFFF for
+ // Mem32
+ // So clear it
+ //
+
+ if (BitsOfAlignment >= 32) {
+ BitsOfAlignment = 0;
+ }
+
+ Status = gDS->AllocateMemorySpace (
+ EfiGcdAllocateAnySearchBottomUp,
+ EfiGcdMemoryTypeMemoryMappedIo,
+ BitsOfAlignment,
+ AddrLen,
+ &BaseAddress,
+ mDriverImageHandle,
+ NULL
+ );
+
+ if (!EFI_ERROR (Status)) {
+ // We were able to allocate the PCI memory
+ RootBridgeInstance->ResAllocNode[Index].Base =
+ (UINTN)BaseAddress;
+ RootBridgeInstance->ResAllocNode[Index].Status =
+ ResAllocated;
+
+ } else {
+ // Not able to allocate enough PCI memory
+ ReturnStatus = Status;
+
+ if (Status != EFI_OUT_OF_RESOURCES) {
+ RootBridgeInstance->ResAllocNode[Index].Length = 0;
+ }
+ ASSERT (FALSE);
+ }
+ break;
+
+ case TypePMem32:
+ case TypeMem64:
+ case TypePMem64:
+ ReturnStatus = EFI_ABORTED;
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }; //end switch
+ }
+ }
+
+ List = List->ForwardLink;
+ }
+
+ return ReturnStatus;
+
+ } else {
+ return EFI_NOT_READY;
+ }
+ break;
+
+ case EfiPciHostBridgeSetResources:
+ break;
+
+ case EfiPciHostBridgeFreeResources:
+ ReturnStatus = EFI_SUCCESS;
+ List = HostBridgeInstance->Head.ForwardLink;
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ for (Index = TypeIo; Index < TypeBus; Index++) {
+ if (RootBridgeInstance->ResAllocNode[Index].Status == ResAllocated) {
+ AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
+ BaseAddress = RootBridgeInstance->ResAllocNode[Index].Base;
+ switch (Index) {
+
+ case TypeIo:
+ Status = gDS->FreeIoSpace (BaseAddress, AddrLen);
+ if (EFI_ERROR (Status)) {
+ ReturnStatus = Status;
+ }
+ break;
+
+ case TypeMem32:
+ Status = gDS->FreeMemorySpace (BaseAddress, AddrLen);
+ if (EFI_ERROR (Status)) {
+ ReturnStatus = Status;
+ }
+ break;
+
+ case TypePMem32:
+ break;
+
+ case TypeMem64:
+ break;
+
+ case TypePMem64:
+ break;
+
+ default:
+ ASSERT (FALSE);
+ break;
+
+ }; //end switch
+ RootBridgeInstance->ResAllocNode[Index].Type = Index;
+ RootBridgeInstance->ResAllocNode[Index].Base = 0;
+ RootBridgeInstance->ResAllocNode[Index].Length = 0;
+ RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
+ }
+ }
+
+ List = List->ForwardLink;
+ }
+
+ HostBridgeInstance->ResourceSubmited = FALSE;
+ HostBridgeInstance->CanRestarted = TRUE;
+ return ReturnStatus;
+
+ case EfiPciHostBridgeEndResourceAllocation:
+ HostBridgeInstance->CanRestarted = FALSE;
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Return the device handle of the next PCI root bridge that is associated with
+ this Host Bridge.
+
+ This function is called multiple times to retrieve the device handles of all
+ the PCI root bridges that are associated with this PCI host bridge. Each PCI
+ host bridge is associated with one or more PCI root bridges. On each call,
+ the handle that was returned by the previous call is passed into the
+ interface, and on output the interface returns the device handle of the next
+ PCI root bridge. The caller can use the handle to obtain the instance of the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for that root bridge. When there are no more
+ PCI root bridges to report, the interface returns EFI_NOT_FOUND. A PCI
+ enumerator must enumerate the PCI root bridges in the order that they are
+ returned by this function.
+
+ For D945 implementation, there is only one root bridge in PCI host bridge.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in, out] RootBridgeHandle Returns the device handle of the next PCI
+ root bridge.
+
+ @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then
+ return the first Rootbridge handle of the
+ specific Host bridge and return EFI_SUCCESS.
+
+ @retval EFI_NOT_FOUND Can not find the any more root bridge in
+ specific host bridge.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
+ returned on a previous call to
+ GetNextRootBridge().
+**/
+EFI_STATUS
+EFIAPI
+GetNextRootBridge(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN OUT EFI_HANDLE *RootBridgeHandle
+ )
+{
+ BOOLEAN NoRootBridge;
+ LIST_ENTRY *List;
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+
+ NoRootBridge = TRUE;
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+ List = HostBridgeInstance->Head.ForwardLink;
+
+
+ while (List != &HostBridgeInstance->Head) {
+ NoRootBridge = FALSE;
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ if (*RootBridgeHandle == NULL) {
+ //
+ // Return the first Root Bridge Handle of the Host Bridge
+ //
+ *RootBridgeHandle = RootBridgeInstance->Handle;
+ return EFI_SUCCESS;
+ } else {
+ if (*RootBridgeHandle == RootBridgeInstance->Handle) {
+ //
+ // Get next if have
+ //
+ List = List->ForwardLink;
+ if (List!=&HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ *RootBridgeHandle = RootBridgeInstance->Handle;
+ return EFI_SUCCESS;
+ } else {
+ return EFI_NOT_FOUND;
+ }
+ }
+ }
+
+ List = List->ForwardLink;
+ } //end while
+
+ if (NoRootBridge) {
+ return EFI_NOT_FOUND;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+}
+
+/**
+ Returns the allocation attributes of a PCI root bridge.
+
+ The function returns the allocation attributes of a specific PCI root bridge.
+ The attributes can vary from one PCI root bridge to another. These attributes
+ are different from the decode-related attributes that are returned by the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
+ RootBridgeHandle parameter is used to specify the instance of the PCI root
+ bridge. The device handles of all the root bridges that are associated with
+ this host bridge must be obtained by calling GetNextRootBridge(). The
+ attributes are static in the sense that they do not change during or after
+ the enumeration process. The hardware may provide mechanisms to change the
+ attributes on the fly, but such changes must be completed before
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is installed. The permitted
+ values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
+ "Related Definitions" below. The caller uses these attributes to combine
+ multiple resource requests.
+
+ For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI
+ bus enumerator needs to include requests for the prefetchable memory in the
+ nonprefetchable memory pool and not request any prefetchable memory.
+
+ Attribute Description
+ ------------------------------------ ---------------------------------------
+ EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root
+ bridge does not support separate
+ windows for nonprefetchable and
+ prefetchable memory. A PCI bus driver
+ needs to include requests for
+ prefetchable memory in the
+ nonprefetchable memory pool.
+
+ EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root
+ bridge supports 64-bit memory windows.
+ If this bit is not set, the PCI bus
+ driver needs to include requests for a
+ 64-bit memory address in the
+ corresponding 32-bit memory pool.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] RootBridgeHandle The device handle of the PCI root bridge in
+ which the caller is interested. Type
+ EFI_HANDLE is defined in
+ InstallProtocolInterface() in the UEFI 2.0
+ Specification.
+
+ @param[out] Attributes The pointer to attribte of root bridge, it is
+ output parameter
+
+ @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
+
+ @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
+
+ @retval EFI_SUCCESS Success to get attribute of interested root
+ bridge.
+**/
+EFI_STATUS
+EFIAPI
+GetAttributes(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ OUT UINT64 *Attributes
+ )
+{
+ LIST_ENTRY *List;
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+
+ if (Attributes == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ if (RootBridgeHandle == RootBridgeInstance->Handle) {
+ *Attributes = RootBridgeInstance->RootBridgeAttrib;
+ return EFI_SUCCESS;
+ }
+ List = List->ForwardLink;
+ }
+
+ //
+ // RootBridgeHandle is not an EFI_HANDLE
+ // that was returned on a previous call to GetNextRootBridge()
+ //
+ return EFI_INVALID_PARAMETER;
+}
+
+/**
+ Sets up the specified PCI root bridge for the bus enumeration process.
+
+ This member function sets up the root bridge for bus enumeration and returns
+ the PCI bus range over which the search should be performed in ACPI 2.0
+ resource descriptor format.
+
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
+
+ @param[out] Configuration Pointer to the pointer to the PCI bus resource
+ descriptor.
+
+ @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
+
+ @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
+
+ @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
+**/
+EFI_STATUS
+EFIAPI
+StartBusEnumeration(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ OUT VOID **Configuration
+ )
+{
+ LIST_ENTRY *List;
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+ VOID *Buffer;
+ UINT8 *Temp;
+ UINT64 BusStart;
+ UINT64 BusEnd;
+
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ if (RootBridgeHandle == RootBridgeInstance->Handle) {
+ //
+ // Set up the Root Bridge for Bus Enumeration
+ //
+ BusStart = RootBridgeInstance->BusBase;
+ BusEnd = RootBridgeInstance->BusLimit;
+ //
+ // Program the Hardware(if needed) if error return EFI_DEVICE_ERROR
+ //
+
+ Buffer = AllocatePool (
+ sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) +
+ sizeof(EFI_ACPI_END_TAG_DESCRIPTOR)
+ );
+ if (Buffer == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Temp = (UINT8 *)Buffer;
+
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Desc = 0x8A;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Len = 0x2B;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->ResType = 2;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->GenFlag = 0;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->SpecificFlag = 0;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrSpaceGranularity = 0;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMin = BusStart;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMax = 0;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrTranslationOffset = 0;
+ ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrLen =
+ BusEnd - BusStart + 1;
+
+ Temp = Temp + sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
+ ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
+ ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
+
+ *Configuration = Buffer;
+ return EFI_SUCCESS;
+ }
+ List = List->ForwardLink;
+ }
+
+ return EFI_INVALID_PARAMETER;
+}
+
+/**
+ Programs the PCI root bridge hardware so that it decodes the specified PCI
+ bus range.
+
+ This member function programs the specified PCI root bridge to decode the bus
+ range that is specified by the input parameter Configuration.
+ The bus range information is specified in terms of the ACPI 2.0 resource
+ descriptor format.
+
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance
+
+ @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be
+ programmed
+
+ @param[in] Configuration The pointer to the PCI bus resource descriptor
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI
+ 2.0 bus resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource
+ descriptors other than bus descriptors.
+
+ @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid
+ ACPI resource descriptors.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this
+ root bridge.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+
+ @retval EFI_SUCCESS The bus range for the PCI root bridge was
+ programmed.
+**/
+EFI_STATUS
+EFIAPI
+SetBusNumbers(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ IN VOID *Configuration
+ )
+{
+ LIST_ENTRY *List;
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+ UINT8 *Ptr;
+ UINTN BusStart;
+ UINTN BusEnd;
+ UINTN BusLen;
+
+ if (Configuration == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Ptr = Configuration;
+
+ //
+ // Check the Configuration is valid
+ //
+ if(*Ptr != ACPI_ADDRESS_SPACE_DESCRIPTOR) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->ResType != 2) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Ptr += sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
+ if (*Ptr != ACPI_END_TAG_DESCRIPTOR) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ Ptr = Configuration;
+
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ if (RootBridgeHandle == RootBridgeInstance->Handle) {
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc;
+
+ Desc = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr;
+ BusStart = (UINTN)Desc->AddrRangeMin;
+ BusLen = (UINTN)Desc->AddrLen;
+ BusEnd = BusStart + BusLen - 1;
+
+ if (BusStart > BusEnd) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((BusStart < RootBridgeInstance->BusBase) ||
+ (BusEnd > RootBridgeInstance->BusLimit)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Update the Bus Range
+ //
+ RootBridgeInstance->ResAllocNode[TypeBus].Base = BusStart;
+ RootBridgeInstance->ResAllocNode[TypeBus].Length = BusLen;
+ RootBridgeInstance->ResAllocNode[TypeBus].Status = ResAllocated;
+
+ //
+ // Program the Root Bridge Hardware
+ //
+
+ return EFI_SUCCESS;
+ }
+
+ List = List->ForwardLink;
+ }
+
+ return EFI_INVALID_PARAMETER;
+}
+
+
+/**
+ Submits the I/O and memory resource requirements for the specified PCI root
+ bridge.
+
+ This function is used to submit all the I/O and memory resources that are
+ required by the specified PCI root bridge. The input parameter Configuration
+ is used to specify the following:
+ - The various types of resources that are required
+ - The associated lengths in terms of ACPI 2.0 resource descriptor format
+
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory
+ resource requirements are being submitted.
+
+ @param[in] Configuration The pointer to the PCI I/O and PCI memory
+ resource descriptor.
+
+ @retval EFI_SUCCESS The I/O and memory resource requests for a PCI
+ root bridge were accepted.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration includes requests for one or
+ more resource types that are not supported by
+ this PCI root bridge. This error will happen
+ if the caller did not combine resources
+ according to Attributes that were returned by
+ GetAllocAttributes().
+
+ @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for
+ this PCI root bridge.
+**/
+EFI_STATUS
+EFIAPI
+SubmitResources(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ IN VOID *Configuration
+ )
+{
+ LIST_ENTRY *List;
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+ UINT8 *Temp;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
+ UINT64 AddrLen;
+ UINT64 Alignment;
+
+ //
+ // Check the input parameter: Configuration
+ //
+ if (Configuration == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ Temp = (UINT8 *)Configuration;
+ while ( *Temp == 0x8A) {
+ Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ;
+ }
+ if (*Temp != 0x79) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Temp = (UINT8 *)Configuration;
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ if (RootBridgeHandle == RootBridgeInstance->Handle) {
+ while ( *Temp == 0x8A) {
+ Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
+
+ //
+ // Check Address Length
+ //
+ if (Ptr->AddrLen > 0xffffffff) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check address range alignment
+ //
+ if (Ptr->AddrRangeMax >= 0xffffffff ||
+ Ptr->AddrRangeMax != (GetPowerOfTwo64 (
+ Ptr->AddrRangeMax + 1) - 1)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ switch (Ptr->ResType) {
+
+ case 0:
+
+ //
+ // Check invalid Address Sapce Granularity
+ //
+ if (Ptr->AddrSpaceGranularity != 32) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // check the memory resource request is supported by PCI root bridge
+ //
+ if (RootBridgeInstance->RootBridgeAttrib ==
+ EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM &&
+ Ptr->SpecificFlag == 0x06) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ AddrLen = Ptr->AddrLen;
+ Alignment = Ptr->AddrRangeMax;
+ if (Ptr->AddrSpaceGranularity == 32) {
+ if (Ptr->SpecificFlag == 0x06) {
+ //
+ // Apply from GCD
+ //
+ RootBridgeInstance->ResAllocNode[TypePMem32].Status =
+ ResSubmitted;
+ } else {
+ RootBridgeInstance->ResAllocNode[TypeMem32].Length = AddrLen;
+ RootBridgeInstance->ResAllocNode[TypeMem32].Alignment =
+ Alignment;
+ RootBridgeInstance->ResAllocNode[TypeMem32].Status =
+ ResRequested;
+ HostBridgeInstance->ResourceSubmited = TRUE;
+ }
+ }
+
+ if (Ptr->AddrSpaceGranularity == 64) {
+ if (Ptr->SpecificFlag == 0x06) {
+ RootBridgeInstance->ResAllocNode[TypePMem64].Status =
+ ResSubmitted;
+ } else {
+ RootBridgeInstance->ResAllocNode[TypeMem64].Status =
+ ResSubmitted;
+ }
+ }
+ break;
+
+ case 1:
+ AddrLen = (UINTN) Ptr->AddrLen;
+ Alignment = (UINTN) Ptr->AddrRangeMax;
+ RootBridgeInstance->ResAllocNode[TypeIo].Length = AddrLen;
+ RootBridgeInstance->ResAllocNode[TypeIo].Alignment = Alignment;
+ RootBridgeInstance->ResAllocNode[TypeIo].Status = ResRequested;
+ HostBridgeInstance->ResourceSubmited = TRUE;
+ break;
+
+ default:
+ break;
+ };
+
+ Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ;
+ }
+
+ return EFI_SUCCESS;
+ }
+
+ List = List->ForwardLink;
+ }
+
+ return EFI_INVALID_PARAMETER;
+}
+
+/**
+ Returns the proposed resource settings for the specified PCI root bridge.
+
+ This member function returns the proposed resource settings for the
+ specified PCI root bridge. The proposed resource settings are prepared when
+ NotifyPhase() is called with a Phase of EfiPciHostBridgeAllocateResources.
+ The output parameter Configuration specifies the following:
+ - The various types of resources, excluding bus resources, that are
+ allocated
+ - The associated lengths in terms of ACPI 2.0 resource descriptor format
+
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is
+ defined in InstallProtocolInterface() in the
+ UEFI 2.0 Specification.
+
+ @param[out] Configuration The pointer to the pointer to the PCI I/O and
+ memory resource descriptor.
+
+ @retval EFI_SUCCESS The requested parameters were returned.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources.
+**/
+EFI_STATUS
+EFIAPI
+GetProposedResources(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ OUT VOID **Configuration
+ )
+{
+ LIST_ENTRY *List;
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+ UINTN Index;
+ UINTN Number;
+ VOID *Buffer;
+ UINT8 *Temp;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
+ UINT64 ResStatus;
+
+ Buffer = NULL;
+ Number = 0;
+ //
+ // Get the Host Bridge Instance from the resource allocation protocol
+ //
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ //
+ // Enumerate the root bridges in this host bridge
+ //
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ if (RootBridgeHandle == RootBridgeInstance->Handle) {
+ for (Index = 0; Index < TypeBus; Index ++) {
+ if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
+ Number ++;
+ }
+ }
+
+ if (Number == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Buffer = AllocateZeroPool (
+ Number * sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) +
+ sizeof(EFI_ACPI_END_TAG_DESCRIPTOR)
+ );
+ if (Buffer == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Temp = Buffer;
+ for (Index = 0; Index < TypeBus; Index ++) {
+ if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
+ Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
+ ResStatus = RootBridgeInstance->ResAllocNode[Index].Status;
+
+ switch (Index) {
+
+ case TypeIo:
+ //
+ // Io
+ //
+ Ptr->Desc = 0x8A;
+ Ptr->Len = 0x2B;
+ Ptr->ResType = 1;
+ Ptr->GenFlag = 0;
+ Ptr->SpecificFlag = 0;
+ Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base;
+ Ptr->AddrRangeMax = 0;
+ Ptr->AddrTranslationOffset = (ResStatus == ResAllocated) ?
+ EFI_RESOURCE_SATISFIED :
+ EFI_RESOURCE_LESS;
+ Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
+ break;
+
+ case TypeMem32:
+ //
+ // Memory 32
+ //
+ Ptr->Desc = 0x8A;
+ Ptr->Len = 0x2B;
+ Ptr->ResType = 0;
+ Ptr->GenFlag = 0;
+ Ptr->SpecificFlag = 0;
+ Ptr->AddrSpaceGranularity = 32;
+ Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base;
+ Ptr->AddrRangeMax = 0;
+ Ptr->AddrTranslationOffset = (ResStatus == ResAllocated) ?
+ EFI_RESOURCE_SATISFIED :
+ EFI_RESOURCE_LESS;
+ Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
+ break;
+
+ case TypePMem32:
+ //
+ // Prefetch memory 32
+ //
+ Ptr->Desc = 0x8A;
+ Ptr->Len = 0x2B;
+ Ptr->ResType = 0;
+ Ptr->GenFlag = 0;
+ Ptr->SpecificFlag = 6;
+ Ptr->AddrSpaceGranularity = 32;
+ Ptr->AddrRangeMin = 0;
+ Ptr->AddrRangeMax = 0;
+ Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT;
+ Ptr->AddrLen = 0;
+ break;
+
+ case TypeMem64:
+ //
+ // Memory 64
+ //
+ Ptr->Desc = 0x8A;
+ Ptr->Len = 0x2B;
+ Ptr->ResType = 0;
+ Ptr->GenFlag = 0;
+ Ptr->SpecificFlag = 0;
+ Ptr->AddrSpaceGranularity = 64;
+ Ptr->AddrRangeMin = 0;
+ Ptr->AddrRangeMax = 0;
+ Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT;
+ Ptr->AddrLen = 0;
+ break;
+
+ case TypePMem64:
+ //
+ // Prefetch memory 64
+ //
+ Ptr->Desc = 0x8A;
+ Ptr->Len = 0x2B;
+ Ptr->ResType = 0;
+ Ptr->GenFlag = 0;
+ Ptr->SpecificFlag = 6;
+ Ptr->AddrSpaceGranularity = 64;
+ Ptr->AddrRangeMin = 0;
+ Ptr->AddrRangeMax = 0;
+ Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT;
+ Ptr->AddrLen = 0;
+ break;
+ };
+
+ Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
+ }
+ }
+
+ ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
+ ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
+
+ *Configuration = Buffer;
+
+ return EFI_SUCCESS;
+ }
+
+ List = List->ForwardLink;
+ }
+
+ return EFI_INVALID_PARAMETER;
+}
+
+/**
+ Provides the hooks from the PCI bus driver to every PCI controller
+ (device/function) at various stages of the PCI enumeration process that allow
+ the host bridge driver to preinitialize individual PCI controllers before
+ enumeration.
+
+ This function is called during the PCI enumeration process. No specific
+ action is expected from this member function. It allows the host bridge
+ driver to preinitialize individual PCI controllers before enumeration.
+
+ @param This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param RootBridgeHandle The associated PCI root bridge handle. Type
+ EFI_HANDLE is defined in InstallProtocolInterface()
+ in the UEFI 2.0 Specification.
+
+ @param PciAddress The address of the PCI device on the PCI bus. This
+ address can be passed to the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to
+ access the PCI configuration space of the device.
+ See Table 12-1 in the UEFI 2.0 Specification for the
+ definition of
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
+
+ @param Phase The phase of the PCI device enumeration.
+
+ @retval EFI_SUCCESS The requested parameters were returned.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined
+ in
+ EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ The PCI enumerator should not enumerate this
+ device, including its child devices if it is
+ a PCI-to-PCI bridge.
+**/
+EFI_STATUS
+EFIAPI
+PreprocessController (
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
+ IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
+ )
+{
+ PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
+ LIST_ENTRY *List;
+
+ HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
+ List = HostBridgeInstance->Head.ForwardLink;
+
+ //
+ // Enumerate the root bridges in this host bridge
+ //
+ while (List != &HostBridgeInstance->Head) {
+ RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
+ if (RootBridgeHandle == RootBridgeInstance->Handle) {
+ break;
+ }
+ List = List->ForwardLink;
+ }
+ if (List == &HostBridgeInstance->Head) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((UINT32)Phase > EfiPciBeforeResourceCollection) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
Added: trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.h
===================================================================
--- trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.h
(rev 0)
+++ trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridge.h 2015-07-14 12:01:36 UTC
(rev 17951)
@@ -0,0 +1,649 @@
+/** @file
+ The Header file of the Pci Host Bridge Driver
+
+ Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#ifndef _PCI_HOST_BRIDGE_H_
+#define _PCI_HOST_BRIDGE_H_
+
+#include <PiDxe.h>
+
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Acpi.h>
+
+#include <Protocol/PciHostBridgeResourceAllocation.h>
+#include <Protocol/PciRootBridgeIo.h>
+#include <Protocol/Metronome.h>
+#include <Protocol/DevicePath.h>
+
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/IoLib.h>
+#include <Library/PciLib.h>
+
+//
+// Hard code the host bridge number in the platform.
+// In this chipset, there is only one host bridge.
+//
+#define HOST_BRIDGE_NUMBER 1
+
+#define MAX_PCI_DEVICE_NUMBER 31
+#define MAX_PCI_FUNCTION_NUMBER 7
+#define MAX_PCI_REG_ADDRESS 0xFF
+
+typedef enum {
+ IoOperation,
+ MemOperation,
+ PciOperation
+} OPERATION_TYPE;
+
+#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't')
+typedef struct {
+ UINTN Signature;
+ EFI_HANDLE HostBridgeHandle;
+ UINTN RootBridgeNumber;
+ LIST_ENTRY Head;
+ BOOLEAN ResourceSubmited;
+ BOOLEAN CanRestarted;
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc;
+} PCI_HOST_BRIDGE_INSTANCE;
+
+#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \
+ CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE)
+
+//
+// HostBridge Resource Allocation interface
+//
+
+/**
+ These are the notifications from the PCI bus driver that it is about to enter
+ a certain phase of the PCI enumeration process.
+
+ This member function can be used to notify the host bridge driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Eight notification points are
+ defined at this time. See belows:
+
+ EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures
+ and internal data structures. The PCI
+ enumerator should issue this
+ notification before starting a fresh
+ enumeration process. Enumeration
+ cannot be restarted after sending any
+ other notification such as
+ EfiPciHostBridgeBeginBusAllocation.
+
+ EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to
+ begin. No specific action is required
+ here. This notification can be used to
+ perform any chipset-specific
+ programming.
+
+ EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming
+ phase is complete. No specific action
+ is required here. This notification
+ can be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeBeginResourceAllocation
+ The resource allocation phase is about
+ to begin. No specific action is
+ required here. This notification can
+ be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeAllocateResources Allocates resources per previously
+ submitted requests for all the PCI
+ root bridges. These resource settings
+ are returned on the next call to
+ GetProposedResources(). Before calling
+ NotifyPhase() with a Phase of
+ EfiPciHostBridgeAllocateResource, the
+ PCI bus enumerator is responsible for
+ gathering I/O and memory requests for
+ all the PCI root bridges and
+ submitting these requests using
+ SubmitResources(). This function pads
+ the resource amount to suit the root
+ bridge hardware, takes care of
+ dependencies between the PCI root
+ bridges, and calls the Global
+ Coherency Domain (GCD) with the
+ allocation request. In the case of
+ padding, the allocated range could be
+ bigger than what was requested.
+
+ EfiPciHostBridgeSetResources Programs the host bridge hardware to
+ decode previously allocated resources
+ (proposed resources) for all the PCI
+ root bridges. After the hardware is
+ programmed, reassigning resources will
+ not be supported. The bus settings are
+ not affected.
+
+ EfiPciHostBridgeFreeResources Deallocates resources that were
+ previously allocated for all the PCI
+ root bridges and resets the I/O and
+ memory apertures to their initial
+ state. The bus settings are not
+ affected. If the request to allocate
+ resources fails, the PCI enumerator
+ can use this notification to
+ deallocate previous resources, adjust
+ the requests, and retry allocation.
+
+ EfiPciHostBridgeEndResourceAllocation The resource allocation phase is
+ completed. No specific action is
+ required here. This notification can
+ be used to perform any chipsetspecific
+ programming.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] Phase The phase during enumeration
+
+ @retval EFI_NOT_READY This phase cannot be entered at this time. For
+ example, this error is valid for a Phase of
+ EfiPciHostBridgeAllocateResources if
+ SubmitResources() has not been called for one
+ or more PCI root bridges before this call
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ This error is valid for a Phase of
+ EfiPciHostBridgeSetResources.
+
+ @retval EFI_INVALID_PARAMETER Invalid phase parameter
+
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources. This error is valid for a
+ Phase of EfiPciHostBridgeAllocateResources if
+ the previously submitted resource requests
+ cannot be fulfilled or were only partially
+ fulfilled.
+
+ @retval EFI_SUCCESS The notification was accepted without any
+ errors.
+**/
+EFI_STATUS
+EFIAPI
+NotifyPhase(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
+ );
+
+/**
+ Return the device handle of the next PCI root bridge that is associated with
+ this Host Bridge.
+
+ This function is called multiple times to retrieve the device handles of all
+ the PCI root bridges that are associated with this PCI host bridge. Each PCI
+ host bridge is associated with one or more PCI root bridges. On each call,
+ the handle that was returned by the previous call is passed into the
+ interface, and on output the interface returns the device handle of the next
+ PCI root bridge. The caller can use the handle to obtain the instance of the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for that root bridge. When there are no more
+ PCI root bridges to report, the interface returns EFI_NOT_FOUND. A PCI
+ enumerator must enumerate the PCI root bridges in the order that they are
+ returned by this function.
+
+ For D945 implementation, there is only one root bridge in PCI host bridge.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in, out] RootBridgeHandle Returns the device handle of the next PCI
+ root bridge.
+
+ @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then
+ return the first Rootbridge handle of the
+ specific Host bridge and return EFI_SUCCESS.
+
+ @retval EFI_NOT_FOUND Can not find the any more root bridge in
+ specific host bridge.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
+ returned on a previous call to
+ GetNextRootBridge().
+**/
+EFI_STATUS
+EFIAPI
+GetNextRootBridge(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN OUT EFI_HANDLE *RootBridgeHandle
+ );
+
+/**
+ Returns the allocation attributes of a PCI root bridge.
+
+ The function returns the allocation attributes of a specific PCI root bridge.
+ The attributes can vary from one PCI root bridge to another. These attributes
+ are different from the decode-related attributes that are returned by the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
+ RootBridgeHandle parameter is used to specify the instance of the PCI root
+ bridge. The device handles of all the root bridges that are associated with
+ this host bridge must be obtained by calling GetNextRootBridge(). The
+ attributes are static in the sense that they do not change during or after
+ the enumeration process. The hardware may provide mechanisms to change the
+ attributes on the fly, but such changes must be completed before
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is installed. The permitted
+ values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
+ "Related Definitions" below. The caller uses these attributes to combine
+ multiple resource requests.
+
+ For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI
+ bus enumerator needs to include requests for the prefetchable memory in the
+ nonprefetchable memory pool and not request any prefetchable memory.
+
+ Attribute Description
+ ------------------------------------ ---------------------------------------
+ EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root
+ bridge does not support separate
+ windows for nonprefetchable and
+ prefetchable memory. A PCI bus driver
+ needs to include requests for
+ prefetchable memory in the
+ nonprefetchable memory pool.
+
+ EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root
+ bridge supports 64-bit memory windows.
+ If this bit is not set, the PCI bus
+ driver needs to include requests for a
+ 64-bit memory address in the
+ corresponding 32-bit memory pool.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] RootBridgeHandle The device handle of the PCI root bridge in
+ which the caller is interested. Type
+ EFI_HANDLE is defined in
+ InstallProtocolInterface() in the UEFI 2.0
+ Specification.
+
+ @param[out] Attributes The pointer to attribte of root bridge, it is
+ output parameter
+
+ @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
+
+ @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
+
+ @retval EFI_SUCCESS Success to get attribute of interested root
+ bridge.
+**/
+EFI_STATUS
+EFIAPI
+GetAttributes(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ OUT UINT64 *Attributes
+ );
+
+/**
+ Sets up the specified PCI root bridge for the bus enumeration process.
+
+ This member function sets up the root bridge for bus enumeration and returns
+ the PCI bus range over which the search should be performed in ACPI 2.0
+ resource descriptor format.
+
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
+
+ @param[out] Configuration Pointer to the pointer to the PCI bus resource
+ descriptor.
+
+ @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
+
+ @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
+
+ @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
+**/
+EFI_STATUS
+EFIAPI
+StartBusEnumeration(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ OUT VOID **Configuration
+ );
+
+/**
+ Programs the PCI root bridge hardware so that it decodes the specified PCI
+ bus range.
+
+ This member function programs the specified PCI root bridge to decode the bus
+ range that is specified by the input parameter Configuration.
+ The bus range information is specified in terms of the ACPI 2.0 resource
+ descriptor format.
+
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance
+
+ @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be
+ programmed
+
+ @param[in] Configuration The pointer to the PCI bus resource descriptor
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI
+ 2.0 bus resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource
+ descriptors other than bus descriptors.
+
+ @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid
+ ACPI resource descriptors.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this
+ root bridge.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+
+ @retval EFI_SUCCESS The bus range for the PCI root bridge was
+ programmed.
+**/
+EFI_STATUS
+EFIAPI
+SetBusNumbers(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ IN VOID *Configuration
+ );
+
+/**
+ Submits the I/O and memory resource requirements for the specified PCI root
+ bridge.
+
+ This function is used to submit all the I/O and memory resources that are
+ required by the specified PCI root bridge. The input parameter Configuration
+ is used to specify the following:
+ - The various types of resources that are required
+ - The associated lengths in terms of ACPI 2.0 resource descriptor format
+
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory
+ resource requirements are being submitted.
+
+ @param[in] Configuration The pointer to the PCI I/O and PCI memory
+ resource descriptor.
+
+ @retval EFI_SUCCESS The I/O and memory resource requests for a PCI
+ root bridge were accepted.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration includes requests for one or
+ more resource types that are not supported by
+ this PCI root bridge. This error will happen
+ if the caller did not combine resources
+ according to Attributes that were returned by
+ GetAllocAttributes().
+
+ @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for
+ this PCI root bridge.
+**/
+EFI_STATUS
+EFIAPI
+SubmitResources(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ IN VOID *Configuration
+ );
+
+/**
+ Returns the proposed resource settings for the specified PCI root bridge.
+
+ This member function returns the proposed resource settings for the
+ specified PCI root bridge. The proposed resource settings are prepared when
+ NotifyPhase() is called with a Phase of EfiPciHostBridgeAllocateResources.
+ The output parameter Configuration specifies the following:
+ - The various types of resources, excluding bus resources, that are
+ allocated
+ - The associated lengths in terms of ACPI 2.0 resource descriptor format
+
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is
+ defined in InstallProtocolInterface() in the
+ UEFI 2.0 Specification.
+
+ @param[out] Configuration The pointer to the pointer to the PCI I/O and
+ memory resource descriptor.
+
+ @retval EFI_SUCCESS The requested parameters were returned.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources.
+**/
+EFI_STATUS
+EFIAPI
+GetProposedResources(
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ OUT VOID **Configuration
+ );
+
+/**
+ Provides the hooks from the PCI bus driver to every PCI controller
+ (device/function) at various stages of the PCI enumeration process that allow
+ the host bridge driver to preinitialize individual PCI controllers before
+ enumeration.
+
+ This function is called during the PCI enumeration process. No specific
+ action is expected from this member function. It allows the host bridge
+ driver to preinitialize individual PCI controllers before enumeration.
+
+ @param This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param RootBridgeHandle The associated PCI root bridge handle. Type
+ EFI_HANDLE is defined in InstallProtocolInterface()
+ in the UEFI 2.0 Specification.
+
+ @param PciAddress The address of the PCI device on the PCI bus. This
+ address can be passed to the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to
+ access the PCI configuration space of the device.
+ See Table 12-1 in the UEFI 2.0 Specification for the
+ definition of
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
+
+ @param Phase The phase of the PCI device enumeration.
+
+ @retval EFI_SUCCESS The requested parameters were returned.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined
+ in
+ EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ The PCI enumerator should not enumerate this
+ device, including its child devices if it is
+ a PCI-to-PCI bridge.
+**/
+EFI_STATUS
+EFIAPI
+PreprocessController (
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
+ IN EFI_HANDLE RootBridgeHandle,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
+ IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
+ );
+
+
+//
+// Define resource status constant
+//
+#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL
+#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL
+
+
+//
+// Driver Instance Data Prototypes
+//
+
+typedef struct {
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation;
+ UINTN NumberOfBytes;
+ UINTN NumberOfPages;
+ EFI_PHYSICAL_ADDRESS HostAddress;
+ EFI_PHYSICAL_ADDRESS MappedHostAddress;
+} MAP_INFO;
+
+typedef struct {
+ ACPI_HID_DEVICE_PATH AcpiDevicePath;
+ EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
+} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH;
+
+typedef struct {
+ UINT64 BusBase;
+ UINT64 BusLimit;
+
+ UINT64 MemBase;
+ UINT64 MemLimit;
+
+ UINT64 IoBase;
+ UINT64 IoLimit;
+} PCI_ROOT_BRIDGE_RESOURCE_APERTURE;
+
+typedef enum {
+ TypeIo = 0,
+ TypeMem32,
+ TypePMem32,
+ TypeMem64,
+ TypePMem64,
+ TypeBus,
+ TypeMax
+} PCI_RESOURCE_TYPE;
+
+typedef enum {
+ ResNone = 0,
+ ResSubmitted,
+ ResRequested,
+ ResAllocated,
+ ResStatusMax
+} RES_STATUS;
+
+typedef struct {
+ PCI_RESOURCE_TYPE Type;
+ UINT64 Base;
+ UINT64 Length;
+ UINT64 Alignment;
+ RES_STATUS Status;
+} PCI_RES_NODE;
+
+#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b')
+
+typedef struct {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+ EFI_HANDLE Handle;
+ UINT64 RootBridgeAttrib;
+ UINT64 Attributes;
+ UINT64 Supports;
+
+ //
+ // Specific for this memory controller: Bus, I/O, Mem
+ //
+ PCI_RES_NODE ResAllocNode[6];
+
+ //
+ // Addressing for Memory and I/O and Bus arrange
+ //
+ UINT64 BusBase;
+ UINT64 MemBase;
+ UINT64 IoBase;
+ UINT64 BusLimit;
+ UINT64 MemLimit;
+ UINT64 IoLimit;
+
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io;
+
+} PCI_ROOT_BRIDGE_INSTANCE;
+
+
+//
+// Driver Instance Data Macros
+//
+#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \
+ CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE)
+
+
+#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \
+ CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE)
+
+/**
+
+ Construct the Pci Root Bridge Io protocol
+
+ @param Protocol Point to protocol instance
+ @param HostBridgeHandle Handle of host bridge
+ @param Attri Attribute of host bridge
+ @param ResAperture ResourceAperture for host bridge
+
+ @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
+**/
+EFI_STATUS
+RootBridgeConstructor (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
+ IN EFI_HANDLE HostBridgeHandle,
+ IN UINT64 Attri,
+ IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture
+ );
+
+#endif
Added: trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
===================================================================
--- trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
(rev 0)
+++ trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf 2015-07-14
12:01:36 UTC (rev 17951)
@@ -0,0 +1,64 @@
+## @file
+# The basic interfaces implementation to a single segment PCI Host Bridge
+# driver.
+#
+# Copyright (c) 2008 - 2014, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PciHostBridge
+ FILE_GUID = 311161C5-BFD9-4504-8016-213F2DAEDAF3
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = InitializePciHostBridge
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ UefiBootServicesTableLib
+ DxeServicesTableLib
+ UefiLib
+ MemoryAllocationLib
+ BaseMemoryLib
+ BaseLib
+ DebugLib
+ DevicePathLib
+ IoLib
+ PciLib
+
+[Sources]
+ PciHostBridge.c
+ PciRootBridgeIo.c
+ PciHostBridge.h
+ IoFifo.h
+
+[Sources.IA32]
+ Ia32/IoFifo.asm
+ Ia32/IoFifo.S
+
+[Sources.X64]
+ X64/IoFifo.asm
+ X64/IoFifo.S
+
+[Protocols]
+ gEfiPciHostBridgeResourceAllocationProtocolGuid ## PRODUCES
+ gEfiPciRootBridgeIoProtocolGuid ## PRODUCES
+ gEfiMetronomeArchProtocolGuid ## CONSUMES
+ gEfiDevicePathProtocolGuid ## PRODUCES
+
+[depex]
+ gEfiMetronomeArchProtocolGuid
Added: trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c
===================================================================
--- trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c
(rev 0)
+++ trunk/edk2/OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c 2015-07-14
12:01:36 UTC (rev 17951)
@@ -0,0 +1,2626 @@
+/** @file
+ PCI Root Bridge Io Protocol implementation
+
+ Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+ WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#include "PciHostBridge.h"
+#include "IoFifo.h"
+
+typedef struct {
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesp[TypeMax];
+ EFI_ACPI_END_TAG_DESCRIPTOR EndDesp;
+} RESOURCE_CONFIGURATION;
+
+RESOURCE_CONFIGURATION Configuration = {
+ {{0x8A, 0x2B, 1, 0, 0, 0, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 0, 32, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 6, 32, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 0, 64, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 6, 64, 0, 0, 0, 0},
+ {0x8A, 0x2B, 2, 0, 0, 0, 0, 0, 0, 0}},
+ {0x79, 0}
+};
+
+//
+// Protocol Member Function Prototypes
+//
+
+/**
+ Polls an address in memory mapped I/O space until an exit condition is met,
+ or a timeout occurs.
+
+ This function provides a standard way to poll a PCI memory location. A PCI
+ memory read operation is performed at the PCI memory address specified by
+ Address for the width specified by Width. The result of this PCI memory read
+ operation is stored in Result. This PCI memory read operation is repeated
+ until either a timeout of Delay 100 ns units has expired, or (Result & Mask)
+ is equal to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+
+ @param[in] Width Signifies the width of the memory operations.
+
+ @param[in] Address The base address of the memory operations. The caller
+ is responsible for aligning Address if required.
+
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width
+ in Mask are ignored. The bits in the bytes below Width
+ which are zero in Mask are ignored when polling the
+ memory address.
+
+ @param[in] Value The comparison value used for the polling exit
+ criteria.
+
+ @param[in] Delay The number of 100 ns units to poll. Note that timer
+ available may be of poorer granularity.
+
+ @param[out] Result Pointer to the last value read from the memory
+ location.
+
@@ Diff output truncated at 100000 characters. @@
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
