Revision: 18503
http://sourceforge.net/p/edk2/code/18503
Author: lzeng14
Date: 2015-09-18 02:02:11 +0000 (Fri, 18 Sep 2015)
Log Message:
-----------
MdeModulePkg DxeCore: Take the range in resource HOB for PHIT as higher priority
Take the range in the resource descriptor HOB for the memory region described
by the PHIT as higher priority if it is big enough. It can make the memory bin
allocated to be at the same memory region with PHIT that has more better
compatibility
to avoid memory fragmentation for some code practices assume and allocate <4G
ACPI memory.
Also let the minimal memory size needed include the total memory bin size
needed to
make sure memory bin could be allocated successfully.
Cc: Jiewen Yao <[email protected]>
Cc: Liming Gao <[email protected]>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <[email protected]>
Reviewed-by: Jiewen Yao <[email protected]>
Reviewed-by: Liming Gao <[email protected]>
Modified Paths:
--------------
trunk/edk2/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
Modified: trunk/edk2/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
===================================================================
--- trunk/edk2/MdeModulePkg/Core/Dxe/Gcd/Gcd.c 2015-09-18 01:19:00 UTC (rev
18502)
+++ trunk/edk2/MdeModulePkg/Core/Dxe/Gcd/Gcd.c 2015-09-18 02:02:11 UTC (rev
18503)
@@ -2003,7 +2003,31 @@
return Capabilities;
}
+/**
+ Calculate total memory bin size neeeded.
+ @return The total memory bin size neeeded.
+
+**/
+UINT64
+CalculateTotalMemoryBinSizeNeeded (
+ VOID
+ )
+{
+ UINTN Index;
+ UINT64 TotalSize;
+
+ //
+ // Loop through each memory type in the order specified by the
gMemoryTypeInformation[] array
+ //
+ TotalSize = 0;
+ for (Index = 0; gMemoryTypeInformation[Index].Type != EfiMaxMemoryType;
Index++) {
+ TotalSize += LShiftU64 (gMemoryTypeInformation[Index].NumberOfPages,
EFI_PAGE_SHIFT);
+ }
+
+ return TotalSize;
+}
+
/**
External function. Initializes memory services based on the memory
descriptor HOBs. This function is responsible for priming the memory
@@ -2044,7 +2068,8 @@
UINT64 TestedMemoryLength;
EFI_PHYSICAL_ADDRESS HighAddress;
EFI_HOB_GUID_TYPE *GuidHob;
- UINT32 ReservedCodePageNumber;
+ UINT32 ReservedCodePageNumber;
+ UINT64 MinimalMemorySizeNeeded;
//
// Point at the first HOB. This must be the PHIT HOB.
@@ -2098,9 +2123,13 @@
}
//
+ // Include the total memory bin size needed to make sure memory bin could be
allocated successfully.
+ //
+ MinimalMemorySizeNeeded = MINIMUM_INITIAL_MEMORY_SIZE +
CalculateTotalMemoryBinSizeNeeded ();
+
+ //
// Find the Resource Descriptor HOB that contains PHIT range
EfiFreeMemoryBottom..EfiFreeMemoryTop
//
- Length = 0;
Found = FALSE;
for (Hob.Raw = *HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw =
GET_NEXT_HOB(Hob)) {
//
@@ -2138,19 +2167,19 @@
Found = TRUE;
//
- // Compute range between PHIT EfiFreeMemoryTop and the end of the Resource
Descriptor HOB
+ // Compute range between PHIT EfiMemoryTop and the end of the Resource
Descriptor HOB
//
Attributes = PhitResourceHob->ResourceAttribute;
BaseAddress = PageAlignAddress (PhitHob->EfiMemoryTop);
Length = PageAlignLength (ResourceHob->PhysicalStart +
ResourceHob->ResourceLength - BaseAddress);
- if (Length < MINIMUM_INITIAL_MEMORY_SIZE) {
+ if (Length < MinimalMemorySizeNeeded) {
//
// If that range is not large enough to intialize the DXE Core, then
// Compute range between PHIT EfiFreeMemoryBottom and PHIT
EfiFreeMemoryTop
//
BaseAddress = PageAlignAddress (PhitHob->EfiFreeMemoryBottom);
Length = PageAlignLength (PhitHob->EfiFreeMemoryTop - BaseAddress);
- if (Length < MINIMUM_INITIAL_MEMORY_SIZE) {
+ if (Length < MinimalMemorySizeNeeded) {
//
// If that range is not large enough to intialize the DXE Core, then
// Compute range between the start of the Resource Descriptor HOB and
the start of the HOB List
@@ -2168,81 +2197,79 @@
ASSERT (Found);
//
- // Search all the resource descriptor HOBs from the highest possible
addresses down for a memory
- // region that is big enough to initialize the DXE core. Always skip the
PHIT Resource HOB.
- // The max address must be within the physically addressible range for the
processor.
+ // Take the range in the resource descriptor HOB for the memory region
described
+ // by the PHIT as higher priority if it is big enough. It can make the
memory bin
+ // allocated to be at the same memory region with PHIT that has more better
compatibility
+ // to avoid memory fragmentation for some code practices assume and allocate
<4G ACPI memory.
//
- HighAddress = MAX_ADDRESS;
- for (Hob.Raw = *HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw =
GET_NEXT_HOB(Hob)) {
+ if (Length < MinimalMemorySizeNeeded) {
//
- // Skip the Resource Descriptor HOB that contains the PHIT
+ // Search all the resource descriptor HOBs from the highest possible
addresses down for a memory
+ // region that is big enough to initialize the DXE core. Always skip the
PHIT Resource HOB.
+ // The max address must be within the physically addressible range for the
processor.
//
- if (Hob.ResourceDescriptor == PhitResourceHob) {
- continue;
- }
- //
- // Skip all HOBs except Resource Descriptor HOBs
- //
- if (GET_HOB_TYPE (Hob) != EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) {
- continue;
- }
+ HighAddress = MAX_ADDRESS;
+ for (Hob.Raw = *HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw =
GET_NEXT_HOB(Hob)) {
+ //
+ // Skip the Resource Descriptor HOB that contains the PHIT
+ //
+ if (Hob.ResourceDescriptor == PhitResourceHob) {
+ continue;
+ }
+ //
+ // Skip all HOBs except Resource Descriptor HOBs
+ //
+ if (GET_HOB_TYPE (Hob) != EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) {
+ continue;
+ }
- //
- // Skip Resource Descriptor HOBs that do not describe tested system memory
below MAX_ADDRESS
- //
- ResourceHob = Hob.ResourceDescriptor;
- if (ResourceHob->ResourceType != EFI_RESOURCE_SYSTEM_MEMORY) {
- continue;
- }
- if ((ResourceHob->ResourceAttribute & MEMORY_ATTRIBUTE_MASK) !=
TESTED_MEMORY_ATTRIBUTES) {
- continue;
- }
- if ((ResourceHob->PhysicalStart + ResourceHob->ResourceLength) >
(EFI_PHYSICAL_ADDRESS)MAX_ADDRESS) {
- continue;
- }
-
- //
- // Skip Resource Descriptor HOBs that are below a previously found
Resource Descriptor HOB
- //
- if (HighAddress != (EFI_PHYSICAL_ADDRESS)MAX_ADDRESS &&
ResourceHob->PhysicalStart <= HighAddress) {
- continue;
- }
+ //
+ // Skip Resource Descriptor HOBs that do not describe tested system
memory below MAX_ADDRESS
+ //
+ ResourceHob = Hob.ResourceDescriptor;
+ if (ResourceHob->ResourceType != EFI_RESOURCE_SYSTEM_MEMORY) {
+ continue;
+ }
+ if ((ResourceHob->ResourceAttribute & MEMORY_ATTRIBUTE_MASK) !=
TESTED_MEMORY_ATTRIBUTES) {
+ continue;
+ }
+ if ((ResourceHob->PhysicalStart + ResourceHob->ResourceLength) >
(EFI_PHYSICAL_ADDRESS)MAX_ADDRESS) {
+ continue;
+ }
- //
- // Skip Resource Descriptor HOBs that are not large enough to initilize
the DXE Core
- //
- TestedMemoryBaseAddress = PageAlignAddress (ResourceHob->PhysicalStart);
- TestedMemoryLength = PageAlignLength (ResourceHob->PhysicalStart +
ResourceHob->ResourceLength - TestedMemoryBaseAddress);
- if (TestedMemoryLength < MINIMUM_INITIAL_MEMORY_SIZE) {
- continue;
+ //
+ // Skip Resource Descriptor HOBs that are below a previously found
Resource Descriptor HOB
+ //
+ if (HighAddress != (EFI_PHYSICAL_ADDRESS)MAX_ADDRESS &&
ResourceHob->PhysicalStart <= HighAddress) {
+ continue;
+ }
+
+ //
+ // Skip Resource Descriptor HOBs that are not large enough to initilize
the DXE Core
+ //
+ TestedMemoryBaseAddress = PageAlignAddress (ResourceHob->PhysicalStart);
+ TestedMemoryLength = PageAlignLength (ResourceHob->PhysicalStart +
ResourceHob->ResourceLength - TestedMemoryBaseAddress);
+ if (TestedMemoryLength < MinimalMemorySizeNeeded) {
+ continue;
+ }
+
+ //
+ // Save the range described by the Resource Descriptor that is large
enough to initilize the DXE Core
+ //
+ BaseAddress = TestedMemoryBaseAddress;
+ Length = TestedMemoryLength;
+ Attributes = ResourceHob->ResourceAttribute;
+ HighAddress = ResourceHob->PhysicalStart;
}
-
- //
- // Save the Resource Descriptor HOB context that is large enough to
initilize the DXE Core
- //
- MaxMemoryBaseAddress = TestedMemoryBaseAddress;
- MaxMemoryLength = TestedMemoryLength;
- MaxMemoryAttributes = ResourceHob->ResourceAttribute;
- HighAddress = ResourceHob->PhysicalStart;
}
- //
- // If Length is not large enough to initialize the DXE Core or a Resource
- // Descriptor HOB was found above the PHIT HOB that is large enough to
initialize
- // the DXE Core, then use the range described by the Resource Descriptor
- // HOB that was found above the PHIT HOB.
- //
- if ((Length < MINIMUM_INITIAL_MEMORY_SIZE) ||
- (MaxMemoryBaseAddress > BaseAddress && MaxMemoryLength >=
MINIMUM_INITIAL_MEMORY_SIZE)) {
- BaseAddress = MaxMemoryBaseAddress;
- Length = MaxMemoryLength;
- Attributes = MaxMemoryAttributes;
- }
+ DEBUG ((EFI_D_INFO, "CoreInitializeMemoryServices:\n"));
+ DEBUG ((EFI_D_INFO, " BaseAddress - 0x%lx Length - 0x%lx
MinimalMemorySizeNeeded - 0x%lx\n", BaseAddress, Length,
MinimalMemorySizeNeeded));
//
// If no memory regions are found that are big enough to initialize the DXE
core, then ASSERT().
//
- ASSERT (Length >= MINIMUM_INITIAL_MEMORY_SIZE);
+ ASSERT (Length >= MinimalMemorySizeNeeded);
//
// Convert the Resource HOB Attributes to an EFI Memory Capabilities mask
------------------------------------------------------------------------------
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
