Cc: Michael D Kinney <[email protected]>
Cc: Liming Gao <[email protected]>
Cc: Leif Lindholm <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
---
Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c | 90 +++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c
b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c
index 58f70d5..7ac12c7 100644
--- a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c
+++ b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c
@@ -3,6 +3,7 @@
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD
License
@@ -122,3 +123,92 @@ SerialPortPoll (
}
}
+/**
+ Sets the control bits on a serial device.
+
+ @param[in] Control Sets the bits of Control that are settable.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial
device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this
operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param[out] Control A pointer to return the current control
signals from the serial device.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial
device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this
operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ *Control = 0;
+ if (!SerialPortPoll ()) {
+ *Control = EFI_SERIAL_INPUT_BUFFER_EMPTY;
+ }
+ return RETURN_SUCCESS;
+}
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data bits, and stop bits on a serial device.
+
+ @param BaudRate The requested baud rate. A BaudRate value of 0
will use the
+ device's default interface speed.
+ On output, the value actually set.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive
side of the
+ serial interface. A ReceiveFifoDepth value of 0
will use
+ the device's default FIFO depth.
+ On output, the value actually set.
+ @param Timeout The requested time out for a single character in
microseconds.
+ This timeout applies to both the transmit and
receive side of the
+ interface. A Timeout value of 0 will use the
device's default time
+ out value.
+ On output, the value actually set.
+ @param Parity The type of parity to use on this serial device. A
Parity value of
+ DefaultParity will use the device's default parity
value.
+ On output, the value actually set.
+ @param DataBits The number of data bits to use on the serial
device. A DataBits
+ vaule of 0 will use the device's default data bit
setting.
+ On output, the value actually set.
+ @param StopBits The number of stop bits to use on this serial
device. A StopBits
+ value of DefaultStopBits will use the device's
default number of
+ stop bits.
+ On output, the value actually set.
+
+ @retval RETURN_SUCCESS The new attributes were set on the serial
device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this
operation.
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an
unsupported value.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning
correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
--
1.9.5.msysgit.0
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel
