On 18 February 2016 at 10:35, Leif Lindholm <[email protected]> wrote: > The Juno .dsc and .fdf files were recently deleted (currently held > in OpenPlatformPkg), but a spurious Makefile for building using it > was left in place. Drop the Makefile to complete the cleanup. > > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Leif Lindholm <[email protected]> Reviewed-by: Ryan Harkin <[email protected]>
> --- > ArmPlatformPkg/ArmJunoPkg/Makefile | 87 > -------------------------------------- > 1 file changed, 87 deletions(-) > delete mode 100644 ArmPlatformPkg/ArmJunoPkg/Makefile > > diff --git a/ArmPlatformPkg/ArmJunoPkg/Makefile > b/ArmPlatformPkg/ArmJunoPkg/Makefile > deleted file mode 100644 > index d8d1f84..0000000 > --- a/ArmPlatformPkg/ArmJunoPkg/Makefile > +++ /dev/null > @@ -1,87 +0,0 @@ > -# > -# Copyright (c) 2013-2014, ARM Limited. All rights reserved. > -# > -# This program and the accompanying materials > -# are licensed and made available under the terms and conditions of the BSD > License > -# which accompanies this distribution. The full text of the license may be > found at > -# http://opensource.org/licenses/bsd-license.php > -# > -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > -# > - > -# Define the following variable to specify an alternative toolchain to the > one located in your PATH: > -# - RVCT_TOOLS_PATH: for RVCT and RVCTLINUX toolchains > - > -EDK2_TOOLCHAIN ?= GCC49 > -GCC49_AARCH64_PREFIX ?= aarch64-none-elf- > -EDK2_ARCH ?= AARCH64 > -EDK2_BUILD ?= DEBUG > -EDK2_DSC = ArmPlatformPkg/ArmJunoPkg/ArmJuno.dsc > -DEST_BIN_ROOT ?= > - > -ifeq ($(EDK2_DSC),"") > - $(error The Makefile macro 'EDK2_DSC' must be defined with an EDK2 DSC > file.) > -endif > - > -ifeq ("$(OS)","Windows_NT") > -export WORKSPACE?=$(PWD) > -export EDK_TOOLS_PATH ?= $(WORKSPACE)\BaseTools > -else > -export WORKSPACE?=$(PWD) > -endif > - > -# Define the destination of the Firmware Image Package (FIP) if not defined > -ifndef JUNO_FIP > - ifdef DEST_BIN_ROOT > - JUNO_FIP=$(DEST_BIN_ROOT)/fip.bin > - else > - JUNO_FIP=fip.bin > - endif > -endif > - > -SHELL := /bin/bash > -SILENT ?= @ > -ECHO ?= echo > -MAKE ?= make -i -k > -RM ?= rm -f > -CP ?= cp > - > -.PHONY: all clean > - > -EDK2_CONF = Conf/BuildEnv.sh Conf/build_rule.txt Conf/target.txt > Conf/tools_def.txt > - > -all: $(EDK2_CONF) > -ifeq ("$(OS)","Windows_NT") > - build -a $(EDK2_ARCH) -p $(EDK2_DSC) -t $(EDK2_TOOLCHAIN) -b > $(EDK2_BUILD) $(EDK2_MACROS) > -else > - . ./edksetup.sh; GCC49_AARCH64_PREFIX=$(GCC49_AARCH64_PREFIX) build > -a $(EDK2_ARCH) -p $(EDK2_DSC) -t $(EDK2_TOOLCHAIN) -b $(EDK2_BUILD) > $(EDK2_MACROS) > -endif > -ifeq ("$(OS)","Windows_NT") > - $(SILENT)$(ECHO) "Warning: The UEFI Firmware must be added to the > Firmware Image Package (FIP)." > -else > - $(SILENT)which fip_create ; \ > - if [ $$? -ne 0 ]; then \ > - $(ECHO) "Warning: 'fip_create' tool is not in the PATH. The > UEFI binary will not be added in the Firmware Image Package (FIP)."; \ > - else \ > - fip_create --bl33 > $(WORKSPACE)/Build/ArmJuno/$(EDK2_BUILD)_$(EDK2_TOOLCHAIN)/FV/BL33_AP_UEFI.fd > --dump $(JUNO_FIP); \ > - fi > -endif > - > -$(EDK2_CONF): > -ifeq ("$(OS)","Windows_NT") > - copy $(EDK_TOOLS_PATH)\Conf\build_rule.template Conf\build_rule.txt > - copy $(EDK_TOOLS_PATH)\Conf\FrameworkDatabase.template > Conf\FrameworkDatabase.txt > - copy $(EDK_TOOLS_PATH)\Conf\target.template Conf\target.txt > - copy $(EDK_TOOLS_PATH)\Conf\tools_def.template Conf\tools_def.txt > -else > - . ./edksetup.sh; $(MAKE) -C BaseTools > -endif > - > -clean: > -ifeq ("$(OS)","Windows_NT") > - build -a $(EDK2_ARCH) -p $(EDK2_DSC) -t $(EDK2_TOOLCHAIN) -b > $(EDK2_BUILD) $(EDK2_MACROS) cleanall > -else > - . ./edksetup.sh; build -a $(EDK2_ARCH) -p $(EDK2_DSC) -t > $(EDK2_TOOLCHAIN) -b $(EDK2_BUILD) $(EDK2_MACROS) cleanall; \ > - rm -Rf $(EDK2_CONF) Conf/.cache > -endif > -- > 2.1.4 > _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
