Ankit: It is good to record and return the SetImage status(either success or fail) for all the FMP instances matching FMP capsule payload. But how it is returned to application layer is still a platform choice
Thanks & Best regards Chao Zhang -----Original Message----- From: Gao, Liming Sent: Monday, August 29, 2016 4:13 PM To: Zhang, Chao B Subject: FW: [EDK2] DxeCapsuleLib returns Status Issue -----Original Message----- From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf Of ankit_sin...@dell.com Sent: Monday, August 29, 2016 3:51 PM To: edk2-devel@lists.01.org Subject: [edk2] [EDK2] DxeCapsuleLib returns Status Issue Dell - Internal Use - Confidential Hi EDK2 Developers, We are incorporating DxeCapsuleLib for FMP Capsule Update into our UEFI product, but we are hitting few issues as described below. In case of Capsule Update "SetImage" is randomly done for all the FMP Handles in case Image Type Id GUID and Image Index matches (this is expected as there might be multiple similar hardware), but looks like the returns of each FMP update is not handled. For example if there are 5 FMP handles (can be for different-different devices) and assume that any particular device handle is at 3rd index, therefore the update goes through successfully on the 3rd attempt but since HandleCount value is 5 it tries further with 4th and 5th Handle. This 4th & 5th Handle attempt can fail for any of the calls within the FMP Handle "for loop" (HandleProtocol/GetImageInfo) and hence the final status is returned as FAILURE to application layer. Below is the code-snippet from DxeCapsuleLib.c , in case of HandleProtocol & GetImageInfo failure, "for" loop for Handle count is continued and the previous Status value is over-written with this new return (return from HandleProtocol & GetImageInfo) and finally returned to application. [cid:image001.jpg@01D201F8.38564220] Proposed Solution:- Can ProcessFmpCapsuleImage() have an extra OUT parameter which gives the list of all successful FMP Handles along with the updated GUID values, so that any application can make the judgment of Update SUCCESS/FAILURE based on FMP Handle and proceed accordingly at application layer. Regards, Ankit Singh _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel