On 2016-12-01 12:48:51, Laszlo Ersek wrote:
> On 12/01/16 20:34, Jordan Justen wrote:
> > On 2016-12-01 09:56:31, Laszlo Ersek wrote:
> >> Add the type and macro definitions related to QEMU's DMA-like fw_cfg
> >> access method in a dedicated header file.
> >>
> >> Cc: Ard Biesheuvel <ard.biesheu...@linaro.org>
> >> Cc: Jordan Justen <jordan.l.jus...@intel.com>
> >> Contributed-under: TianoCore Contribution Agreement 1.0
> >> Signed-off-by: Laszlo Ersek <ler...@redhat.com>
> >> ---
> >>  OvmfPkg/Include/IndustryStandard/QemuFwCfgDma.h | 50 ++++++++++++++++++++
> > 
> > What do you think about just
> > OvmfPkg/Include/IndustryStandard/QemuFwCfg.h?
> > 
> > Arguably, the FIRMWARE_CONFIG_ITEM enums could be moved there as
> > well...
> > 
> > Then again, I think we could also just put this content into
> > OvmfPkg/Include/Library/QemuFwCfgLib.h.
> 
> Adding this stuff to "OvmfPkg/Include/Library/QemuFwCfgLib.h" sounds
> good to me; I'll do that in v2.
> 

Ok. By the way, I looked over the series, and with that change you can
add Reviewed-by: Jordan Justen <jordan.l.jus...@intel.com>

I'll let you decide if you want to send out a v2.

-Jordan

> 
> > -Jordan
> > 
> >>  1 file changed, 50 insertions(+)
> >>
> >> diff --git a/OvmfPkg/Include/IndustryStandard/QemuFwCfgDma.h 
> >> b/OvmfPkg/Include/IndustryStandard/QemuFwCfgDma.h
> >> new file mode 100644
> >> index 000000000000..37a5804adb05
> >> --- /dev/null
> >> +++ b/OvmfPkg/Include/IndustryStandard/QemuFwCfgDma.h
> >> @@ -0,0 +1,50 @@
> >> +/** @file
> >> +  Macro and type definitions related to QEMU's DMA-like fw_cfg access 
> >> method,
> >> +  based on "docs/specs/fw_cfg.txt" in the QEMU tree.
> >> +
> >> +  Copyright (C) 2016, Red Hat, Inc.
> >> +
> >> +  This program and the accompanying materials are licensed and made 
> >> available
> >> +  under the terms and conditions of the BSD License which accompanies this
> >> +  distribution.  The full text of the license may be found at
> >> +  http://opensource.org/licenses/bsd-license.php
> >> +
> >> +  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 
> >> WITHOUT
> >> +  WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> >> +**/
> >> +
> >> +
> >> +#ifndef __FW_CFG_DMA__
> >> +#define __FW_CFG_DMA__
> >> +
> >> +#include <Base.h>
> >> +
> >> +//
> >> +// If the following bit is set in the UINT32 fw_cfg revision / feature 
> >> bitmap
> >> +// -- read from key 0x0001 with the basic IO Port or MMIO method --, then 
> >> the
> >> +// DMA interface is available.
> >> +//
> >> +#define FW_CFG_F_DMA BIT1
> >> +
> >> +//
> >> +// Communication structure for the DMA access method. All fields are 
> >> encoded in
> >> +// big endian.
> >> +//
> >> +#pragma pack (1)
> >> +typedef struct {
> >> +  UINT32 Control;
> >> +  UINT32 Length;
> >> +  UINT64 Address;
> >> +} FW_CFG_DMA_ACCESS;
> >> +#pragma pack ()
> >> +
> >> +//
> >> +// Macros for the FW_CFG_DMA_ACCESS.Control bitmap (in native encoding).
> >> +//
> >> +#define FW_CFG_DMA_CTL_ERROR  BIT0
> >> +#define FW_CFG_DMA_CTL_READ   BIT1
> >> +#define FW_CFG_DMA_CTL_SKIP   BIT2
> >> +#define FW_CFG_DMA_CTL_SELECT BIT3
> >> +#define FW_CFG_DMA_CTL_WRITE  BIT4
> >> +
> >> +#endif
> >> -- 
> >> 2.9.2
> >>
> >>
> 
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to