Thank you Jiaxin. I didn't have access to my mail for the last 3-4 days. Sorry 
for the delay.

-----Original Message-----
From: Wu, Jiaxin [mailto:jiaxin...@intel.com] 
Sent: Monday, April 17, 2017 12:05 PM
To: Santhapur Naveen; edk2-devel@lists.01.org
Cc: Zhang, Lubo
Subject: RE: SUT hangs after performing a warm boot.

Thanks Naveen,  I will try reproduce it, then report to you. 


> -----Original Message-----
> From: Santhapur Naveen [mailto:nave...@amiindia.co.in]
> Sent: Monday, April 17, 2017 2:33 PM
> To: Wu, Jiaxin <jiaxin...@intel.com>; edk2-devel@lists.01.org
> Cc: Zhang, Lubo <lubo.zh...@intel.com>
> Subject: RE: SUT hangs after performing a warm boot.
> 
> Hi Jiaxin,
> 
>       The latter is correct. Restart the windows and the hang happens.
> 
> Thanks,
> Naveen
> 
> -----Original Message-----
> From: Wu, Jiaxin [mailto:jiaxin...@intel.com]
> Sent: Thursday, April 13, 2017 1:34 PM
> To: Wu, Jiaxin; Santhapur Naveen; edk2-devel@lists.01.org
> Cc: Zhang, Lubo
> Subject: RE: SUT hangs after performing a warm boot.
> 
> Or do you mean the issue should be reproduce at window warm boot with 
> below steps?
> 
> 1. Boot to windows
> 2. restart the windows, then hang happen?
> 
> Thanks,
> Jiaxin
> 
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf 
> > Of Wu, Jiaxin
> > Sent: Thursday, April 13, 2017 3:48 PM
> > To: Santhapur Naveen <nave...@amiindia.co.in>; 
> > edk2-devel@lists.01.org
> > Cc: Zhang, Lubo <lubo.zh...@intel.com>
> > Subject: Re: [edk2] SUT hangs after performing a warm boot.
> >
> > Naveen,
> >
> > Do you mean only the "reset -w" operation caused the hang? Need us 
> > change the IPv6 policy?
> >
> > Thanks,
> > Jiaxin
> >
> > > -----Original Message-----
> > > From: Santhapur Naveen [mailto:nave...@amiindia.co.in]
> > > Sent: Wednesday, April 12, 2017 8:12 PM
> > > To: Wu, Jiaxin <jiaxin...@intel.com>; edk2-devel@lists.01.org
> > > Cc: Zhang, Lubo <lubo.zh...@intel.com>
> > > Subject: RE: SUT hangs after performing a warm boot.
> > >
> > > Hi Jiaxin,
> > >
> > >   The patch in your previous mail doesn't help. The issue still 
> > > exists even after the patch.
> > >   After some debugging, it is found that it hangs in 
> > > p6SendNeighborSolicit()->Ip6Output()call.
> > >
> > >   //
> > >           // Send the Neighbor Solicitation message with
> > >           // Source - unspecified address, destination - 
> > > solicited-node multicast address
> > >           // Target - the address to be validated
> > >           //
> > >           Status = Ip6SendNeighborSolicit (
> > >                      IpSb,
> > >                      NULL,
> > >                      &DupAddrDetect->Destination,
> > >                      &DupAddrDetect->AddressInfo->Address,
> > >                      NULL
> > >                      );
> > >
> > >   I shall update you more information soon.
> > >
> > > Thanks,
> > > Naveen
> > >
> > > -----Original Message-----
> > > From: Wu, Jiaxin [mailto:jiaxin...@intel.com]
> > > Sent: Tuesday, April 11, 2017 8:55 AM
> > > To: Santhapur Naveen; edk2-devel@lists.01.org
> > > Cc: Zhang, Lubo
> > > Subject: RE: SUT hangs after performing a warm boot.
> > >
> > > Ok, I didn't loop in another email discussion. I just reviewed the 
> > > patch from Lubo, and I think it may be related to this issue since 
> > > both of them are triggered  by Ip6NdFasterTimerTicking.
> > >
> > > Thanks,
> > > Jiaxin
> > >
> > > > -----Original Message-----
> > > > From: Santhapur Naveen [mailto:nave...@amiindia.co.in]
> > > > Sent: Tuesday, April 11, 2017 10:20 AM
> > > > To: Wu, Jiaxin <jiaxin...@intel.com>; edk2-devel@lists.01.org
> > > > Subject: RE: SUT hangs after performing a warm boot.
> > > >
> > > > Hi Jiaxin,
> > > >
> > > >         I think this patch is for another fix which causes ASSERT. But 
> > > > anyways I'll give it a try and update you.
> > > >
> > > > Thanks,
> > > > Naveen
> > > >
> > > > -----Original Message-----
> > > > From: Wu, Jiaxin [mailto:jiaxin...@intel.com]
> > > > Sent: Tuesday, April 11, 2017 7:05 AM
> > > > To: Santhapur Naveen; edk2-devel@lists.01.org
> > > > Subject: RE: SUT hangs after performing a warm boot.
> > > >
> > > > Hi Naveen,
> > > >
> > > > Can you help to verify whether the attached patch can resolve 
> > > > your
> issue?
> > > >
> > > > Thanks,
> > > > Jiaxin
> > > >
> > > > > -----Original Message-----
> > > > > From: Santhapur Naveen [mailto:nave...@amiindia.co.in]
> > > > > Sent: Monday, April 10, 2017 7:31 PM
> > > > > To: Wu, Jiaxin <jiaxin...@intel.com>; edk2-devel@lists.01.org
> > > > > Subject: RE: SUT hangs after performing a warm boot.
> > > > >
> > > > > Hi Jiaxin,
> > > > >
> > > > >       Below are the simple reproduction steps:
> > > > >
> > > > >       BIOS UEFI Class3
> > > > >       (1)   Connect LAN cable (Realtek)
> > > > >       (2)   Do cold boot or warm boot stress (Windows 10)
> > > > >
> > > > >       Please let me know for any additional information you may need.
> > > > >
> > > > > Thanks,
> > > > > Naveen
> > > > >
> > > > > -----Original Message-----
> > > > > From: Wu, Jiaxin [mailto:jiaxin...@intel.com]
> > > > > Sent: Monday, April 10, 2017 6:00 AM
> > > > > To: Santhapur Naveen; edk2-devel@lists.01.org
> > > > > Subject: RE: SUT hangs after performing a warm boot.
> > > > >
> > > > > Hi Naveen,
> > > > >
> > > > > As the description of Ip6NdFasterTimerTicking(), it's the time 
> > > > > routine of ND module for IPv6.
> > > > >
> > > > > Can you provide the detailed reproduce steps?
> > > > >
> > > > > Thanks,
> > > > > Jiaxin
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On 
> > > > > > Behalf Of Santhapur Naveen
> > > > > > Sent: Friday, April 7, 2017 8:20 PM
> > > > > > To: edk2-devel@lists.01.org
> > > > > > Subject: [edk2] SUT hangs after performing a warm boot.
> > > > > >
> > > > > > Hi all,
> > > > > >
> > > > > >           Under NetworkPkg, in Ip6Dxe driver, what purpose 
> > > > > > does this function
> > > > > > Ip6NdFasterTimerTicking() serve?
> > > > > >           Sometimes, the SUT hangs in this function (at
> > > > > > bootmgfw.Entry) when booting to Windows after performing a 
> > > > > > warm
> > > > boot.
> > > > > >
> > > > > > Thanks,
> > > > > > Naveen
> > > > > > _______________________________________________
> > > > > > edk2-devel mailing list
> > > > > > edk2-devel@lists.01.org
> > > > > > https://lists.01.org/mailman/listinfo/edk2-devel
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to