Under the following scenario: - no UEFI bootable application available anywhere in the system, - ... not even for the default platform recovery option, - no shell is built into the firmware image, - but UiApp is available in the firmware image,
we should preferably not just hang in BdsEntry() with: DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n")); CpuDeadLoop (); while the user sits at the TianoCore logo page, wondering what's going on. Print an informative message to the console, wait for a keypress, and then return to the Boot Manager Menu forever. Cc: Ard Biesheuvel <ard.biesheu...@linaro.org> Cc: Jordan Justen <jordan.l.jus...@intel.com> Cc: Ruiyu Ni <ruiyu...@intel.com> Cc: Eric Dong <eric.d...@intel.com> Cc: Star Zeng <star.z...@intel.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418 Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=513 Suggested-by: Ruiyu Ni <ruiyu...@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <ler...@redhat.com> --- MdeModulePkg/Universal/BdsDxe/BdsEntry.c | 60 ++++++++++++++++++-- 1 file changed, 56 insertions(+), 4 deletions(-) diff --git a/MdeModulePkg/Universal/BdsDxe/BdsEntry.c b/MdeModulePkg/Universal/BdsDxe/BdsEntry.c index dccc49090219..2b24755ac368 100644 --- a/MdeModulePkg/Universal/BdsDxe/BdsEntry.c +++ b/MdeModulePkg/Universal/BdsDxe/BdsEntry.c @@ -676,24 +676,73 @@ BdsAllocateMemoryForPerformanceData ( // // Mark L"PerfDataMemAddr" variable to read-only if the Variable Lock protocol exists // Still lock it even the variable cannot be saved to prevent it's set by 3rd party code. // Status = gBS->LocateProtocol (&gEdkiiVariableLockProtocolGuid, NULL, (VOID **) &VariableLock); if (!EFI_ERROR (Status)) { Status = VariableLock->RequestToLock (VariableLock, L"PerfDataMemAddr", &gPerformanceProtocolGuid); ASSERT_EFI_ERROR (Status); } } } +/** + Enter an infinite loop of calling the Boot Manager Menu. + + This is a last resort alternative to BdsEntry() giving up for good. This + function never returns. + + @param[in] BootManagerMenu The EFI_BOOT_MANAGER_LOAD_OPTION located and/or + created by the EfiBootManagerGetBootManagerMenu() + call in BdsEntry(). +**/ +VOID +BdsBootManagerMenuLoop ( + IN EFI_BOOT_MANAGER_LOAD_OPTION *BootManagerMenu + ) +{ + EFI_INPUT_KEY Key; + + // + // Normally BdsDxe does not print anything to the system console, but this is + // a last resort -- the end-user will likely not see any DEBUG messages + // logged in this situation. + // + // AsciiPrint() will NULL-check gST->ConOut internally. We check gST->ConIn + // here to see if it makes sense to request and wait for a keypress. + // + if (gST->ConIn != NULL) { + AsciiPrint ( + "%a: No bootable option or device was found.\n" + "%a: Press any key to enter the Boot Manager Menu.\n", + gEfiCallerBaseName, + gEfiCallerBaseName + ); + BdsWaitForSingleEvent (gST->ConIn->WaitForKey, 0); + + // + // Drain any queued keys. + // + while (!EFI_ERROR (gST->ConIn->ReadKeyStroke (gST->ConIn, &Key))) { + // + // just throw away Key + // + } + } + + for (;;) { + EfiBootManagerBoot (BootManagerMenu); + } +} + /** Service routine for BdsInstance->Entry(). Devices are connected, the consoles are initialized, and the boot options are tried. @param This Protocol Instance structure. **/ VOID EFIAPI BdsEntry ( IN EFI_BDS_ARCH_PROTOCOL *This @@ -1079,34 +1128,37 @@ BdsEntry ( } do { // // Retry to boot if any of the boot succeeds // LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionTypeBoot); BootSuccess = BootBootOptions (LoadOptions, LoadOptionCount, (BootManagerMenuStatus != EFI_NOT_FOUND) ? &BootManagerMenu : NULL); EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); } while (BootSuccess); } - if (BootManagerMenuStatus != EFI_NOT_FOUND) { - EfiBootManagerFreeLoadOption (&BootManagerMenu); - } - if (!BootSuccess) { LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionTypePlatformRecovery); ProcessLoadOptions (LoadOptions, LoadOptionCount); EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); } + // + // If BootManagerMenu is available, fall back to it indefinitely. + // + if (BootManagerMenuStatus != EFI_NOT_FOUND) { + BdsBootManagerMenuLoop (&BootManagerMenu); + } + DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n")); CpuDeadLoop (); } /** Set the variable and report the error through status code upon failure. @param VariableName A Null-terminated string that is the name of the vendor's variable. Each VariableName is unique for each VendorGuid. VariableName must contain 1 or more characters. If VariableName is an empty string, then EFI_INVALID_PARAMETER is returned. @param VendorGuid A unique identifier for the vendor. -- 2.14.1.3.gb7cf6e02401b _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel