On 4 January 2018 at 11:27, Meenakshi Aggarwal <meenakshi.aggar...@nxp.com> wrote: > Hi Ard, > > > I tried using NonDiscoverablePciDeviceDxe driver for SATA (AHCI), but on > using this my SATA drive is not been detected by UEFI. > > Below is the reason of error: > > From EnumerateAttachedDevice() function AhciModeInitialization() function > gets called. > > In AhciModeInitialization() under else loop i am receiving EFI_TIMEOUT from > AhciIdentify() > > } else if ((Data & EFI_AHCI_ATAPI_SIG_MASK) == EFI_AHCI_ATA_DEVICE_SIG) > { > Status = AhciIdentify (PciIo, AhciRegisters, Port, 0, &Buffer); > > if (EFI_ERROR (Status)) { > REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA > | EFI_P_EC_NOT_DETECTED)); > continue; > } > > DeviceType = EfiIdeHarddisk; > > Then i check In AhciIdentify() function. > Here, AhciPioTransfer() calls AhciCheckMemSet() to read PioFisReceived and > D2hFisReceived. > And AhciCheckMemSet() returns EFI_NOT_READY for both cases. > So timeout occurs. > > I tried to compare PciEmulation layer and NonDiscoverablePciDeviceDxe but not > able to find much difference. > > Please suggest what can possibly i am missing. >
Does it work for XHCI? >> -----Original Message----- >> From: Ard Biesheuvel [mailto:ard.biesheu...@linaro.org] >> Sent: Friday, December 22, 2017 9:02 PM >> To: Meenakshi Aggarwal <meenakshi.aggar...@nxp.com> >> Cc: Leif Lindholm <leif.lindh...@linaro.org>; Kinney, Michael D >> <michael.d.kin...@intel.com>; edk2-devel@lists.01.org; Udit Kumar >> <udit.ku...@nxp.com>; Varun Sethi <v.se...@nxp.com> >> Subject: Re: [PATCH edk2-platforms 0/3] Cover letter:Pci Emulation and SATA >> support >> >> On 22 December 2017 at 12:16, Meenakshi Aggarwal >> <meenakshi.aggar...@nxp.com> wrote: >> > Following patches add support for pci emulation layer >> > and SATA on NXP boards. >> > >> > Null Library for USB is also present to give completeness >> > to Pci Emulation layer. >> > >> > Meenakshi Aggarwal (3): >> > USB: Added Support of DWC3 USB controller. >> > PciEmulation : Add support for Pci Emulation layer. >> > SATA : Added SATA controller initialization driver. >> > >> >> Please don't add PCI emulation drivers. Instead, we have >> NonDiscoverablePciDeviceDxe that supports AHCI, XHCI, EHCI, OHCI, >> UHCI, UFS, NVME and SDHCI platform devices. >> >> > Platform/NXP/Drivers/PciEmulation/PciEmulation.c | 624 >> +++++++++++++++++++++ >> > Platform/NXP/Drivers/PciEmulation/PciEmulation.h | 306 ++++++++++ >> > Platform/NXP/Drivers/PciEmulation/PciEmulation.inf | 54 ++ >> > .../NXP/Drivers/PciEmulation/PciRootBridgeIo.c | 286 ++++++++++ >> > Platform/NXP/Drivers/SataInitDxe/SataInit.c | 122 ++++ >> > Platform/NXP/Drivers/SataInitDxe/SataInit.h | 32 ++ >> > Platform/NXP/Drivers/SataInitDxe/SataInitDxe.inf | 43 ++ >> > .../NXP/Library/UsbHcdNullLibrary/UsbHcdLibNull.c | 25 + >> > .../NXP/Library/UsbHcdNullLibrary/UsbHcdNull.inf | 28 + >> > Platform/NXP/NxpQoriqLs.dec | 14 +- >> > Platform/NXP/NxpQoriqLs.dsc | 15 + >> > 11 files changed, 1547 insertions(+), 2 deletions(-) >> > create mode 100644 Platform/NXP/Drivers/PciEmulation/PciEmulation.c >> > create mode 100755 Platform/NXP/Drivers/PciEmulation/PciEmulation.h >> > create mode 100644 Platform/NXP/Drivers/PciEmulation/PciEmulation.inf >> > create mode 100644 >> Platform/NXP/Drivers/PciEmulation/PciRootBridgeIo.c >> > create mode 100644 Platform/NXP/Drivers/SataInitDxe/SataInit.c >> > create mode 100644 Platform/NXP/Drivers/SataInitDxe/SataInit.h >> > create mode 100644 Platform/NXP/Drivers/SataInitDxe/SataInitDxe.inf >> > create mode 100644 >> Platform/NXP/Library/UsbHcdNullLibrary/UsbHcdLibNull.c >> > create mode 100644 >> Platform/NXP/Library/UsbHcdNullLibrary/UsbHcdNull.inf >> > >> > -- >> > 1.9.1 >> > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel