Align the UART DT nodes:
- use 'uart' not 'fuart' as node name for the second serial port
- create an alias 'serial1' for the second serial port
- use UART clock reference instead of hardcoded frequency
- split 'clocks' property into 1 cell per phandle
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheu...@linaro.org>
---
Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
index 37a3981f0360..7c3518facb98 100644
--- a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
+++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
@@ -32,6 +32,7 @@
aliases {
serial0 = &soc_uart0;
+ serial1 = &fuart;
};
chosen {
@@ -436,15 +437,16 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0x2a400000 0x0 0x1000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_uart &clk_apb>;
+ clocks = <&clk_uart>, <&clk_apb>;
clock-names = "uartclk", "apb_pclk";
};
- fuart: fuart@51040000 {
+ fuart: uart@51040000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x51040000 0x0 0x1000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <62500000>;
+ clocks = <&clk_uart>, <&clk_apb>;
+ clock-names = "baudclk", "apb_pclk";
reg-io-width = <4>;
reg-shift = <2>;
};
--
2.11.0
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
