REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1260
For the PassThru() service of NVM Express Pass Through Protocol, the
current implementation (function NvmExpressPassThru()) will only use the
IO Completion/Submission queues created internally by this driver during
the controller initialization process. Any other IO queues created will
not be consumed.
So the value is little to accept external IO Completion/Submission queue
creation request. This commit will refine the behavior of function
NvmExpressPassThru(), it will only accept driver internal IO queue
creation commands and will return "EFI_UNSUPPORTED" for external ones.
Cc: Jiewen Yao <jiewen....@intel.com>
Cc: Ruiyu Ni <ruiyu...@intel.com>
Cc: Star Zeng <star.z...@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a...@intel.com>
---
MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c | 42
++++++++++++++++----
1 file changed, 34 insertions(+), 8 deletions(-)
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
index c52e960771..0c550bd52c 100644
--- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
+++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
@@ -476,6 +476,7 @@ NvmExpressPassThru (
UINT32 Data;
NVME_PASS_THRU_ASYNC_REQ *AsyncRequest;
EFI_TPL OldTpl;
+ UINT32 CrIoQid;
//
// check the data fields in Packet parameter.
@@ -587,14 +588,39 @@ NvmExpressPassThru (
}
Sq->Prp[0] = (UINT64)(UINTN)Packet->TransferBuffer;
- //
- // If the NVMe cmd has data in or out, then mapping the user buffer to the
PCI controller specific addresses.
- // Note here we don't handle data buffer for CreateIOSubmitionQueue and
CreateIOCompletionQueue cmds because
- // these two cmds are special which requires their data buffer must support
simultaneous access by both the
- // processor and a PCI Bus Master. It's caller's responsbility to ensure
this.
- //
- if (((Sq->Opc & (BIT0 | BIT1)) != 0) &&
- !((Packet->QueueType == NVME_ADMIN_QUEUE) && ((Sq->Opc ==
NVME_ADMIN_CRIOCQ_CMD) || (Sq->Opc == NVME_ADMIN_CRIOSQ_CMD)))) {
+ if ((Packet->QueueType == NVME_ADMIN_QUEUE) &&
+ ((Sq->Opc == NVME_ADMIN_CRIOCQ_CMD) || (Sq->Opc ==
NVME_ADMIN_CRIOSQ_CMD))) {
+ //
+ // Command Dword 10 should be valid for CreateIOCompletionQueue and
+ // CreateIOSubmissionQueue commands.
+ //
+ if (!(Packet->NvmeCmd->Flags & CDW10_VALID)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Bits 15:0 of Command Dword 10 is the Queue Identifier (QID) for
+ // CreateIOCompletionQueue and CreateIOSubmissionQueue commands.
+ //
+ CrIoQid = Packet->NvmeCmd->Cdw10 & 0xFFFF;
+
+ //
+ // Currently, we only use the IO Completion/Submission queues created
internally
+ // by this driver during controller initialization. Any other IO queues
created
+ // will not be consumed here. The value is little to accept external IO
queue
+ // creation requests, so here we will return EFI_UNSUPPORTED for external
IO
+ // queue creation request.
+ //
+ if ((CrIoQid >= NVME_MAX_QUEUES) ||
+ ((Sq->Opc == NVME_ADMIN_CRIOCQ_CMD) && (Packet->TransferBuffer !=
Private->CqBufferPciAddr[CrIoQid])) ||
+ ((Sq->Opc == NVME_ADMIN_CRIOSQ_CMD) && (Packet->TransferBuffer !=
Private->SqBufferPciAddr[CrIoQid]))) {
+ DEBUG ((DEBUG_ERROR, "NvmExpressPassThru: Does not support external IO
queues creation request.\n"));
+ return EFI_UNSUPPORTED;
+ }
+ } else if ((Sq->Opc & (BIT0 | BIT1)) != 0) {
+ //
+ // If the NVMe cmd has data in or out, then mapping the user buffer to the
PCI controller specific addresses.
+ //
if (((Packet->TransferLength != 0) && (Packet->TransferBuffer == NULL)) ||
((Packet->TransferLength == 0) && (Packet->TransferBuffer != NULL))) {
return EFI_INVALID_PARAMETER;
--
2.12.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
