Reviewed-by: Fu Siyuan <siyuan...@intel.com>
> -----Original Message----- > From: Wu, Jiaxin > Sent: Monday, November 5, 2018 2:59 PM > To: edk2-devel@lists.01.org > Cc: Carsey, Jaben <jaben.car...@intel.com>; Ye, Ting <ting...@intel.com>; > Fu, Siyuan <siyuan...@intel.com>; Wu, Jiaxin <jiaxin...@intel.com> > Subject: [PATCH v1] ShellPkg/TftpDynamicCommand: Clarify the retry count > option in command. > > [-c <retry count>] is to define the number of times to transmit request > packets and wait for a response. The default value is 6. But it doesn't > specify the behavior of zero value. Here, The patch is to clear that: > Set to zero also means to use the default value. > > Cc: Carsey Jaben <jaben.car...@intel.com> > Cc: Ye Ting <ting...@intel.com> > Cc: Fu Siyuan <siyuan...@intel.com> > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Wu Jiaxin <jiaxin...@intel.com> > --- > ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c | 6 +++++- > ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.uni | 3 ++- > 2 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c > b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c > index ac2813efc3..028686e1ff 100644 > --- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c > +++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c > @@ -216,11 +216,11 @@ EFI_MTFTP4_CONFIG_DATA DefaultMtftp4ConfigData = { > { { 0, 0, 0, 0 } }, // SubnetMask - Not relevant > as UseDefaultSetting=TRUE > 0, // LocalPort - Automatically > assigned port number. > { { 0, 0, 0, 0 } }, // GatewayIp - Not relevant > as UseDefaultSetting=TRUE > { { 0, 0, 0, 0 } }, // ServerIp - Not known yet > 69, // InitialServerPort - Standard TFTP > server port > - 6, // TryCount - Max number of > retransmissions. > + 6, // TryCount - The number of > times to transmit request packets and wait for a response. > 4 // TimeoutValue - Retransmission > timeout in seconds. > }; > > STATIC CONST SHELL_PARAM_ITEM ParamList[] = { > {L"-i", TypeValue}, > @@ -419,10 +419,14 @@ RunTftp ( > ValueStr = ShellCommandLineGetValue (CheckPackage, L"-c"); > if (ValueStr != NULL) { > if (!StringToUint16 (ValueStr, &Mtftp4ConfigData.TryCount)) { > goto Error; > } > + > + if (Mtftp4ConfigData.TryCount == 0) { > + Mtftp4ConfigData.TryCount = 6; > + } > } > > ValueStr = ShellCommandLineGetValue (CheckPackage, L"-t"); > if (ValueStr != NULL) { > if (!StringToUint16 (ValueStr, &Mtftp4ConfigData.TimeoutValue)) { > diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.uni > b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.uni > index 654e42ad23..ff64912564 100644 > --- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.uni > +++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.uni > @@ -56,11 +56,12 @@ > " -i interface - Specifies an adapter name, i.e., eth0.\r\n" > " -l port - Specifies the local port number. Default value is > 0\r\n" > " and the port number is automatically assigned.\r\n" > " -r port - Specifies the remote port number. Default value is > 69.\r\n" > " -c <retry count> - The number of times to transmit request packets > and\r\n" > -" wait for a response. The default value is 6.\r\n" > +" wait for a response. The default value is 6. Set to > zero\r\n" > +" also means to use the default value.\r\n" > " -t <timeout> - The number of seconds to wait for a response > after\r\n" > " sending a request packet. Default value is 4s.\r\n" > " -s <block size> - Specifies the TFTP blksize option as defined in RFC > 2348.\r\n" > " Valid range is between 8 and 65464, default value > is 512.\r\n" > " -w <window size> - Specifies the TFTP windowsize option as defined in > RFC 7440.\r\n" > -- > 2.17.1.windows.2 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel